Altronix TROVE T2MK34 User manual

Rev. TMKL120121

Installing Company: _________________________ Service Rep. Name: __________________________________________

Address: _________________________________________________________ Phone #: _________________________

All registered trademarks are property of their respective owners. More than just power.™

Installation Guide

Access & Power Integration

Altronix Trove2/Mercury Kits with Fused Outputs

All components of these Trove kits are UL Listed sub-assemblies.

Please refer to the included corresponding Sub-Assembly Installation Guides for further information.

T2MK34

Fully assembled 4 door kit includes:

- Trove2 enclosure with

TM2 Altronix/Mercury backplane

- (1) AL600ULXB - Power Supply/Charger

- (1) ACM4 - Fused Access Power Controller

- (1) VR6 - Voltage Regulator

- (1) PDS8 - Dual Input Fused Power Distribution Module

T2MK38

Fully assembled 8 door kit includes:

- Trove2 enclosure with

TM2 Altronix/Mercury backplane

- (1) AL600ULXB - Power Supply/Charger

- (1) ACM8 - Fused Access Power Controller

- (1) VR6 - Voltage Regulator

- (1) PDS8 - Dual Input Fused Power Distribution Module

T2MK78

Fully assembled 8 door kit includes:

- Trove2 enclosure with

TM2 Altronix/Mercury backplane

- (1) AL1024ULXB2 - Power Supply/Charger

- (1) ACM8 - Fused Access Power Controller

- (1) VR6 - Voltage Regulator

- (1) PDS8 - Dual Input Fused Power Distribution Module

T2MK7516

Fully assembled 16 door kit includes:

- Trove2 enclosure with TM2 Altronix/Mercury

backplane and TMV2 door backplane

- (1) AL1024ULXB2 - Power Supply/Charger

- (1) AL1012ULXB - Power Supply/Charger

- (2) ACM8 - Fused Access Power Controllers

- (1) PD16W - Fused Power Distribution Module

T2MK7716

Fully assembled 16 door kit includes:

- Trove2 enclosure with TM2 Altronix/Mercury

backplane and TMV2 door backplane

- (2) AL1024ULXB2 - Power Supply/Chargers

- (2) ACM8 - Fused Access Power Controllers

- (1) VR6 - Voltage Regulator

- (1) PDS8 - Dual Input Fused Power Distribution Module

- 2 - Trove2/Mercury Fused ULXB Kits Installation Guide

Overview:

Altronix Trove Mercury kits are pre-assembled and consist of Trove2M2 enclosure with factory installed Altronix power supply/charger(s) and sub-assemblies.

These kits also accommodate various combinations of Mercury boards for up to sixteen (16) doors in a single enclosure.

Configuration Chart:

Altronix

Model Number

115VAC 60Hz

Input Current (A)

Power Supply Board

Input Fuse Rating

Power Supply Board

Battery Fuse Rating

Output Voltage Options

Maximum Supply

Current for Main and Aux.

Outputs on Power Supply

board and ACM4/ACM8

Access Power Controller’s

outputs

Fail-Safe/Fail-Secure

Outputs

Current Per

ACM4/ACM8 Output (A)

ACM4/ACM8

Board Input Fuse Rating

ACM4/ACM8 Board

Output PFuse Rating

PDS8 Board

Input Fuse Rating

PDS8 Board

Output Fuse Rating

PD8UL/PD16W

Board Output Fuse Rating

Power

Supply 1

Power

Supply 2

T2MK34 3.5 5A/

250V N/A

12VDC @

5.7A –24VDC @ 5.7A 4 2.5 10A/

250V

3A/

32V

10A/

250V

3A/

32V –

24VDC @

5.5A

T2MK38 3.5 5A/

250V N/A

12VDC @

5.7A –24VDC @ 5.7A 8 2.5 10A/

250V

3.5A/

250V

10A/

250V

3A/

32V –

24VDC @

5.5A

T2MK78 4.2 5A/

250V

15A/

32V

24VDC @

9.5A –24VDC @ 9.5A 8 2.5 10A/

250V

3.5A/

250V

10A/

250V

3A/

32V –

T2MK7516 6.8 5A/

250V

15A/

32V

12VDC @

9.5A

24VDC @

9.5A

12VDC @ 9.3A

24VDC @ 9.5A 16 2.5 10A/

250V

3.5A/

250V – – 3.5A/

250V

T2MK7716 8.4 5A/

250V

15A/

32V

24VDC @

9.5A

24VDC @

9.5A 24VDC @ 9.5A 16 2.5 10A/

250V

3.5A/

250V

10A/

250V

3A/

32V –

Installation Instructions:

Wiring methods shall be in accordance with the National Electrical Code/NFPA 70/ANSI, and with all local codes and authorities having jurisdiction.

Product is intended for indoor use only.

1. Remove backplane(s) from enclosure. Do not discard hardware.

2. Mark and predrill holes in the wall to line up with the top three keyholes in the enclosure. Install three upper fasteners

and screws in the wall with the screw heads protruding. Place the enclosure’s upper keyholes over the three upper

screws, level and secure. Mark the position of the lower three holes. Remove the enclosure. Drill the lower holes

and install the three fasteners. Place the enclosure’s upper keyholes over the three upper screws. Install the three

lower screws and make sure to tighten all screws.

3. Mount included UL Listed tamper switch (Altronix Model TS112 or equivalent) in desired location, opposite

hinge. Slide the tamper switch bracket onto the edge of the enclosure approximately 2” from the right side

(Fig. 1, pg. 2). Connect tamper switch wiring to the Access Control Panel input or the appropriate UL Listed

reporting device. To activate alarm signal open the door of the enclosure.

4. Refer to the ULXB Power Supply/Charger Installation Guide for AL600ULXB, AL1012ULXB and AL1024ULXB2 and

Sub-Assembly Installation Guide for the following models: ACM4, ACM8, PDS8, VR6 for

further installation instructions.

5. Fasten snap on spacers onto metal pems configuration of backplane depending on the Mercury access controller

(Fig. 2-5, pg. 3-6).

6. Position Mercury access controller module over corresponding spacers and depress onto snap on spacers (Fig. 2-5, pg. 3-6).

7. Mount backplane to enclosure with hardware.

Fig. 1

Tamper Switch

(included)

To Access Control Panel or

UL Listed Reporting Device

Edge of

Enclosure

Trove2/Mercury Fused ULXB Kits Installation Guide - 3 -

T2MK34 and T2MK38 Configuration of Mercury Boards:

1. Fasten snap on spacers onto metal pems configuration (A), (B), (C) or (D) of backplane depending on the access controller (Fig. 2, pg. 3).

2. Position access controller module over corresponding spacers and depress onto snap on spacers (Fig. 2a, pg. 3).

3. Mount backplane to enclosure with hardware.

Access Controller Position Chart for the Following Models:

Mercury Access Controller Pem Mounting

EP1502, MR52, MR16IN, MR16OUT A

EP2500, MUX8 B

EP1501, MR51e C

MR50 D

Fig. 2

OUTPUT 1 OUTPUT 2 OUTPUT 3 OUTPUT 4 OUTPUT 5 OUTPUT 6 OUTPUT 7 OUTPUT 8

NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM

IN GND IN GND IN GND IN GNDIN GND IN GND IN GND IN GND

1 2 3 4 5 6 7 8

INPUT

TRIGGER

10A 250V

+INP- T + RET-

NO C NC

FACP INTERFACE

Power Control

- + - +

F1 F2 F3 F4 F5 F6 F7 F8

MAIN

TRG

FACP

1 2 3 4

TRG

TRIGGER

INPUT

ACM4

ACCESS POWER

CONTROLLER

LED1 LED2 LED3 LED4

MAIN

OUTPUT 1

NC C NO COM NC C NO COM NC C NO COM NC C NO COM

OUTPUT 2 OUTPUT 3

IN GND

OUTPUT 4

-- +

CONTROL

-- +

POWER

+INP- T +RET-

INTERFACE

NO C NC

FACP

Altronix ACM4

(T2MK34)

Altronix ACM8

(T2MK38)

Altronix - PDS8

Altronix VR6 is mounted under PDS8

BAT FAIL NC C NO NC C NO AC FAIL

AC DC BAT

+BAT- + DC -

L G N

OFF - 24V

ON - 12V

Altronix - AL600ULXB

+ INP1 --

PWR1 +OFF

IN1

IN2

Out1

<1 off 2>

PWR1 +

PWR2 +

COM (--- )

+ INP2 --

IN2 Fuse

IN1 Fuse

Common Power Outputs (NEG)

OUT1 OUT2 OUT3 OUT4 OUT5 OUT6 OUT7 OUT8

1 2 3 4 5 6 7 8

3333 33

Out2

<1 off 2>

Out3

<1 off 2>

Out4

<1 off 2>

Out5

<1 off 2>

Out6

<1 off 2>

Out7

<1 off 2>

Out8

<1 off 2>

Snap On

Spacer

Mercury Board

Backplane

Pem

Fig. 2a

- 4 - Trove2/Mercury Fused ULXB Kits Installation Guide

T2MK78: Configuration of Mercury Boards:

1. Fasten snap on spacers onto metal pems configuration (A), (B), (C) or (D) of backplane depending on the access controller (Fig. 3, pg. 4).

2. Position access controller module over corresponding spacers and depress onto snap on spacers (Fig. 3a, pg. 4).

3. Mount backplane to enclosure with hardware.

Access Controller Position Chart for the Following Models:

Mercury Access Controller Pem Mounting

EP1502, MR52, MR16IN, MR16OUT A

EP2500, MUX8 B

EP1501, MR51e C

MR50 D

Fig. 3

Altronix VR6 is mounted under PDS8

Altronix PDS8

Altronix - ACM8

Altronix - AL1024ULXB2

BAT FAIL

AC FAIL

- BAT + + DC -

AC DELAY

+ INP1 --

PWR1 +OFF

IN1

IN2

Out1

<1 off 2>

PWR1 +

PWR2 +

COM (--- )

+ INP2 --

IN2 Fuse

IN1 Fuse

Common Power Outputs (NEG)

OUT1 OUT2 OUT3 OUT4 OUT5 OUT6 OUT7 OUT8

1 2 3 4 5 6 7 8

3333 33

Out2

<1 off 2>

Out3

<1 off 2>

Out4

<1 off 2>

Out5

<1 off 2>

Out6

<1 off 2>

Out7

<1 off 2>

Out8

<1 off 2>

OUTPUT 1 OUTPUT 2 OUTPUT 3 OUTPUT 4 OUTPUT 5 OUTPUT 6 OUTPUT 7 OUTPUT 8

NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM

IN GND IN GND IN GND IN GNDIN GND IN GND IN GND IN GND

1 2 3 4 5 6 7 8

INPUT

TRIGGER

10A 250V

+INP- T + RET-

NO C NC

FACP INTERFACE

Power Control

- + - +

F1 F2 F3 F4 F5 F6 F7 F8

MAIN

TRG

FACP

1 2 3 4

Snap On

Spacer

Mercury Board

Backplane

Pem

Fig. 3a

Trove2/Mercury Fused ULXB Kits Installation Guide - 5 -

T2MK7516: Configuration of Mercury Boards:

1. Fasten snap on spacers onto metal pems configuration (A), (B), (C) or (D) of backplane depending on the access controller (Fig. 4, pg. 5).

2. Position access controller module over corresponding spacers and depress onto snap on spacers (Fig. 4a, pg. 5).

3. Mount backplane to enclosure with hardware.

Access Controller Position Chart for the Following Models:

Mercury Access Controller Pem Mounting

EP1502, MR52, MR16IN, MR16OUT A

EP2500, MUX8 B

EP1501, MR51e C

MR50 D

Fig. 4

Altronix PD16W

XFMR INPUT SP

P N

1 2 3 4 5 6 7 8910 11 12 13 14 15 16

PROTECTED

OUTPUTS

COMMON

OUTPUTS

Altronix - AL1024ULXB2

BAT FAIL

AC FAIL

- BAT + + DC -

AC DELAY

+ BAT -

L G N BAT FAIL NC C NO NC C NO AC FAIL

AC DC

- DC +

Altronix- AL1012ULXB

Altronix - ACM8

OUTPUT 1 OUTPUT 2 OUTPUT 3 OUTPUT 4 OUTPUT 5 OUTPUT 6 OUTPUT 7 OUTPUT 8

NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM

IN GND IN GND IN GND IN GNDIN GND IN GND IN GND IN GND

1 2 3 4 5 6 7 8

INPUT

TRIGGER

10A 250V

+INP- T + RET-

NO C NC

FACP INTERFACE

Power Control

- + - +

F1 F2 F3 F4 F5 F6 F7 F8

MAIN

TRG

FACP

1 2 3 4

Altronix - ACM8

OUTPUT 1 OUTPUT 2 OUTPUT 3 OUTPUT 4 OUTPUT 5 OUTPUT 6 OUTPUT 7 OUTPUT 8

NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM

IN GND IN GND IN GND IN GNDIN GND IN GND IN GND IN GND

1 2 3 4 5 6 7 8

INPUT

TRIGGER

10A 250V

+INP- T + RET-

NO C NC

FACP INTERFACE

Power Control

- + - +

F1 F2 F3 F4 F5 F6 F7 F8

MAIN

TRG

FACP

1 2 3 4

B A

Snap On

Spacer

Mercury Board

Backplane

Pem

Fig. 4a

- 6 - Trove2/Mercury Fused ULXB Kits Installation Guide

T2MK7716: Configuration of Mercury Boards:

1. Fasten snap on spacers onto metal pems configuration (A), (B), (C) or (D) of backplane depending on the access controller (Fig. 5, pg. 6).

2. Position access controller module over corresponding spacers and depress onto snap on spacers (Fig. 5a, pg. 6).

3. Mount backplane to enclosure with hardware.

Access Controller Position Chart for the Following Models:

Mercury Access Controller Pem Mounting

EP1502, MR52, MR16IN, MR16OUT A

EP2500, MUX8 B

EP1501, MR51e C

MR50 D

Fig. 5

Altronix - AL1024ULXB2

BAT FAIL

AC FAIL

- BAT + + DC -

AC DELAY

Altronix - AL1024ULXB2

BAT FAIL

AC FAIL

- BAT + + DC -

AC DELAY

Altronix - ACM8

OUTPUT 1 OUTPUT 2 OUTPUT 3 OUTPUT 4 OUTPUT 5 OUTPUT 6 OUTPUT 7 OUTPUT 8

NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM

IN GND IN GND IN GND IN GNDIN GND IN GND IN GND IN GND

1 2 3 4 5 6 7 8

INPUT

TRIGGER

10A 250V

+INP- T + RET-

NO C NC

FACP INTERFACE

Power Control

- + - +

F1 F2 F3 F4 F5 F6 F7 F8

MAIN

TRG

FACP

1 2 3 4

Altronix - ACM8

OUTPUT 1 OUTPUT 2 OUTPUT 3 OUTPUT 4 OUTPUT 5 OUTPUT 6 OUTPUT 7 OUTPUT 8

NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM

IN GND IN GND IN GND IN GNDIN GND IN GND IN GND IN GND

1 2 3 4 5 6 7 8

INPUT

TRIGGER

10A 250V

+INP- T + RET-

NO C NC

FACP INTERFACE

Power Control

- + - +

F1 F2 F3 F4 F5 F6 F7 F8

MAIN

TRG

FACP

1 2 3 4

Altronix - PDS8

Altronix VR6 is mounted under PDS8

+ INP1 --

PWR1 +OFF

IN1

IN2

Out1

<1 off 2>

PWR1 +

PWR2 +

COM (--- )

+ INP2 --

IN2 Fuse

IN1 Fuse

Common Power Outputs (NEG)

OUT1 OUT2 OUT3 OUT4 OUT5 OUT6 OUT7 OUT8

1 2 3 4 5 6 7 8

3333 33

Out2

<1 off 2>

Out3

<1 off 2>

Out4

<1 off 2>

Out5

<1 off 2>

Out6

<1 off 2>

Out7

<1 off 2>

Out8

<1 off 2>

B A

Snap On

Spacer

Mercury Board

Backplane

Pem

Fig. 5a

Trove2/Mercury Fused ULXB Kits Installation Guide - 7 -

Snap on

Spacer

Nylon

Spacer

Sub-Assembly

Backplane

Pem

TMV2 (T2MK7516 and T2MK7716):

TMV2 accommodates a variety of Mercury boards with or without Altronix sub-assemblies for access systems.

Configuration of Mercury and/or Altronix Boards

Mercury Access Controllers:

1. Fasten spacers onto metal pems configuration (A) (B) of backplane depending on the access controller (Fig. 6, pg. 7).

2. Position access controller module over corresponding spacers and depress onto snap on spacers (Fig. 6a, pg. 7).

3. Mount backplane to enclosure with hardware.

Altronix Sub-Assemblies and/or Adapters:

1. Fasten spacers to pems which match the hole pattern (C) for Altronix Sub-Assemblies (Fig. 6, 6a, pg. 7).

2. Mount boards to spacers utilizing pan head screws provided with the product (Fig. 6, pg. 7).

Access Controller Position Chart for the Following Models:

Mercury

Access Controller Pem Mounting

EP1502, MR52, MR16IN, MR16OUT A

EP2500, MUX8 B

Altronix

Sub-Assembly or Adapter Pem Mounting

ACM4(CB), MOM5, PD4UL(CB), PD8UL(CB), PDS8(CB), VR6, GB1 (Genetec Synergis Cloud Link adapter plate) C

Fig. 6

Fig. 6a

- 8 - Trove2/Mercury Fused ULXB Kits Installation Guide

Enclosure Dimensions (H x W x D approximate):

27.25” x 21.5” x 6.5” (692.2mm x 552.5mm x 165.1mm)

6.75” (171.5mm)8.25” (209.5mm)

8.00” (203.2mm)

2.00” (50.8mm)

1.25” (31.8mm)

5.25” (133.4mm) 5.25” (133.4mm)7.00” (177.8mm)

1.25” (31.8mm)

6.25” (158.8mm) 19.80” (502.9mm)

1.00” (25.4mm)

27” (685.8mm)

1.5”

(38.1mm)

2.00” (50.8mm) 2.00” (50.8mm)

3.5”(88.9mm) 3.5”(88.9mm)

21.50” (546.1mm)

5.25” (133.35mm) 5.25” (133.35mm)

6.25” (158.8mm)

1.25”

(31.8mm)

0.85” (21.6mm)

0.5625” (14.3mm)

2.415” (61.3mm)

0.685” (17.4mm)

1.77”

(45mm)

0.885” (22.5mm)

1.125” (28.3mm)

Knockouts

2.00” (50.8mm) 2.00” (50.8mm)

Altronix is not responsible for any typographical errors.

––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

140 58th Street, Brooklyn, New York 11220 USA | phone: 718-567-8181 | fax: 718-567-9056

web site: www.altronix.com | e-mail: [email protected] | Lifetime Warranty

IITrove2/Mercury ULXB Fused Kits K30U

MEMBER

This manual suits for next models

Table of contents

Other Altronix Power Supply manuals

Altronix

Altronix eFlow102NV User manual

Altronix

Altronix MAXIMAL FIT MaxFit E Series User manual

Altronix

Altronix ALTV248UL3 series User manual

Altronix

Altronix ALTV2432UL Series User manual

Altronix

Altronix ALTV244WP Series User manual

Altronix

Altronix ALTV1224C User manual

Altronix

Altronix AL1012X220 Series User manual

Altronix

Altronix ALTV2432UL3 Series User manual

Altronix

Altronix Maximal DV Series User manual

Altronix

Altronix ALTV2416ULX User manual

Altronix

Altronix AL600ULX Series User manual

Altronix

Altronix ALTV615DC8220 Operating and maintenance instructions

Altronix

Altronix SMP7PM User manual

Altronix

Altronix ALTV1224DC Series User manual

Altronix

Altronix SMP10WP12 User manual

Altronix

Altronix ALTV244UL User manual

Altronix

Altronix eFlow Series User manual

Altronix

Altronix AL400UL3 User manual

Altronix

Altronix Maximal Fit Series User manual

Altronix

Altronix AL100UL User manual

Altronix

Altronix SMP3CTX Series User manual

Altronix

Altronix R2416UL User manual

Altronix

Altronix ALTV244220 Series User manual

Altronix

Altronix SMP10C24X220 Series User manual

Popular Power Supply manuals by other brands

Monacor

Monacor PS-12CCD instruction manual

VOLTIMA

VOLTIMA MagicBox 15 Installation and operating instructions

Agilent Technologies

Agilent Technologies 6032A Service manual

Miller

Miller Auto Deltaweld 452 owner's manual

BCP

BCP PUOUBK How to install

HC 2210 manual

Puls

Puls CT5.241 installation manual

OCZ

OCZ ZX1250W Technical specifications

iseg

iseg ECH 238 manual

Power

Power XXL A Series instruction manual

Agilent Technologies

Agilent Technologies 6631B Service manual

Renogy

Renogy PHOENIX 300 user guide

HP 6200B Operating and service manual

Epson

Epson Stylus Scan 2500 Product information sheet

Pulsar

Pulsar GREEN POWER CCTV PoE POE044816 manual

Puls

Puls MiniLine ML50.100 instruction manual

Puls

Puls AS-Interface SLA4.100 installation manual

Kenwood

Kenwood PS-60 instruction manual