Alpine TUE-T150DV User manual
ENGLISH
Contents
Operating Instructions
WARNING
WARNING
CAUTION
PRECAUTIONS
SAFETY
Controls on remote control
Basic Operations
................................................. 4
.................................................. 4
......................................... 5
..................................................... 5
...................... 6
Information
OSD Structure
Installation & Connections
WARNING
CAUTION
PRECAUTIONS
Installation
Connections & System Wiring
Specifications
............................................ 18
.................................................. 19
................................................... 19
......................................... 20
.................................................. 20
................ 21
........................................... 22
Getting Started
Installation
STB Setup
Viewer’s Preference
Signal Strength
About Box
Hot Keys
………….……..………..……… 7
……………….……….…………. 8, 9
………..…..…..………..….. 10, 11, 12
…………………….…….. 13
………………..……..…….….. 13
…………………………………….. 13
……………………….… 14, 15, 16, 17
3-EN
EN
EN
3-EN
4-EN
WARNING
WARNING
DO NOT OPERATE ANY FUNCTION THAT TAKES
YOUR ATTENTION AWAY FROM SAFELY DRIVING
YOUR VEHICLE.
Any function that requires your prolonged attention
should only be performed after coming to a complete stop.
Always stop the vehicle in a safe location before
performing these functions. Failure to do so may result in
an accident.
DO NOT DISASSEMBLE OR ALTER.
Doing so may result in an accident, fire or electric shock.
USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS.
Use for other than its designed application may result in
fire, electric shock or other injury.
KEEP SMALL OBJECTS SUCH AS BATTERY OUT OF
THE REACH OF CHILDREN.
Swallowing them may result in serious injury. If
swallowed, consult a physician immediately.
USE THE CORRECT AMPERE RATING WHEN
REPLACING FUSES.
Failure to do so may result in fire or electric shock.
This symbol means important instructions.
Failure to heed them can result in serious
injury or death.
HALT USE IMMEDIATELY IF A PROBLEM APPEARS.
Failure to do so may cause personal injury or damage to
the product. Return it to your authorized Alpine dealer or
the nearest Alpine Service Center for repairing.
DO NOT MIX NEW BATTERIES WITH OLD
BATTERIES. INSERT WITH THE CORRECT BATTERY
POLARITY.
When inserting the batteries, be sure to observe proper
polarity (+ and –) as instructed.
Rupture or chemical leakage from the battery may cause
fire or personal injury.
This symbol means important instructions.
Failure to heed them can result in injury or
material property damage.
WARNING
4-EN
5-EN
PRECAUTIONS
Temperature
Be sure the temperature inside the vehicle is between
+45°C (+113°F) and 0°C (+32°F) before turning your unit
on.
Fuse Replacement
When replacing the fuse(s), the replacement must be of
the same amperage as shown on the fuse holder. If the
fuse(s) blows more than once, carefully check all
electrical connections for shorted circuitry. Also have your
vehicle’s voltage regulator checked.
Maintenance
If you have problems, do not attempt to repair the unit
yourself. Return it to your Alpine dealer or the nearest
Alpine Service Station for servicing.
Installation Location
Make sure the TUE-T150DV will not be exposed to:
• Direct sun and heat
• High humidity
• Excessive dust
• Excessive vibrations
SAFETY
EN
Video Output (front)
In order to ensure vehicle safety, the screen viewed bythe driver
must be connected to the front video output.
This will ensure the driver will not be able to view TV whilethe
vehicle is moving, if the blue/yellow handbrake cable is properly
connected. The driver will be able to view TV only if the hand-
brake is applied. The rear passenger screens, connected to the
video output, do not fall underthis restriction.
Notice: Rear view camera can only been viewed from the monitor
connected to the front video output.
EN
5-EN
OK
1 2 3
4 5 6
7 8 9
0
1
18
2
3
4
5
6
7
8
9
19
12
11
10
13
14
15
16
17
OK
1 2 3
4 5 6
7 8 9
0
6-EN
Controls on remote control
19 A/V button
Press the button and the source will change as
shown below:
DVB-T Radio A/V 1
3Number buttons
Preset services and Teletext pages can be
directly accessed by using the number buttons.
11 Exit button
Press the button to return from a menu.
18 Audio button
Press the button to enter the audio setup
menu.
8Back button
Press the button return to the previously
selected service.
5LIST buttons
Press the list button to show a list of all
available services.
2INFO buttons
Press the info button to show reception
details.of the currently selected service.
6Teletext menu buttons
Navigate the Teletext shortcut menu by
pressing these buttons
In TV mode the yellow/blue button can be
pressed to select the next/previous
favourite service.
9Power button
Press the button to turn the DVB-T tuner
unit on/off.
4CH+ / CH- buttons
Press these buttons to select the next/prev.
preset service.
14 VOL+ / VOL- buttons
Press these buttons to adjust the volume
ouput level.
17 Menu button
Press the button to enter the main menu.
16 OK button
Press the button to select a highlighted
menu item or to confirm a number input.
12 Scan button
Press the button to start the auto scan
procedure.
13 Mute button
Press the button to switch on/off the audio output.
10 TXT button
Press the button to enter the Teletext menu.
1EPG button
Press the button to enter the Electronic
Program Guide menu.
buttons
Press the left/right buttons to navigate the
OSD or to skip the next/previous 100
Teletext pages.
7
Press the up/down buttons to navigate the
OSD or to load the next/previous Teletext-
page.
15 FAV+ / FAV- button
Use these buttons to move Up / Down within your
favorite list.
6-EN
7-EN
• Select highlighted item and press OK to enter the sub-menu.
The sub-menu will be shown on the screen.
• Press EXIT to return to the main menu.
Getting Started
Settings in the main menu
Entering sub-menus
• Press MENU key on the remote control to view the main menu on the screen.
• Press EXIT to quit.
EN
EN
7-EN
8-EN
• The installation menu lets you add, delete and
auto scan terrestrial carriers.
• Auto Scan
In this menu you can select your country and
scan mode to do a fast or slow scan.
• Fast scan scans a list of carriers.
• Slow scan scans the full range of frequencies.
Press OK to start auto scan after having selected
the scanning mode.
• Add Carrier manually
- Select your country.
- Select the channel number.
Press OK to confirm your input.
Installation
8-EN
9-EN
• Carrier Info
In this menu you can see the carrier parameters.
Press OK to re-tune the highlighted carrier.
• Delete Carrier
Select a carrier and press OK to delete it.
• Delete All Carriers
Installation
EN
This function deletes all stored carrier information
and services.
EN
9-EN
10-EN
• From the STB Setup menu you can reach the
following sub-menus:
- TV Setting
- Password Setting
- Factory Default
- Time Setting
- Parental Guidance
- Box Setting
• TV Setting
- Language:
Select your preferred OSD language.
-TV Screen options:
a. 4:3
b. Auto
c. 16:9
- Mode options if TV screen is set to 4:3 or Auto:
a. Full Screen
b. Letter Box
- Mode options if TV screen is set to 16:9:
a. Standard
b. Full Zoom
c. Half Zoom
d. Centred
- Audio Mode lets you switch the audio output
between stereo, left channel only and right channel only.
- The transparency of the OSD window can be adjusted
by moving the slide bar.
- The banner timeout of the OSD window can be adjusted
by moving the slide bar.
While TV is being viewed, the right arrow button on
the RC ( )can be used to toggle between the above
described display modes.
STB Setup
10-EN
OK
11-EN
• Password Setting
In this menu you can change your password.
The new password will be automatically stored
after the matching confirmation entry is done.
• The default password is 0000.
• Factory Default
Select Factory Default and confirm with Yes to
proceed the download of the device’s factory
default settings.
All user settings will be overwritten.
• Time Setting
Here you can set the time zone relative to GMT.
STB Setup
EN
EN
11-EN
• Parental Guidance
In this menu you can set the locking mechanism.
• Enter your password to access
the parental guidance level.
• Select the desired locking mechanism
according to the Australian OFLC codes.
(Effective only, if supported by the broadcaster.)
NO: Block none
G: Block G and above
PG: Block PG and above
M: Block M and above
MA: Block MA and above
AV: Block AV and above
R: Block R and above
P: Block P and above
C: Block C and above
ALL: Block all
• Change Password
Select “Enabled” to change the parental password.
• Box Setting - Volume Mode:
- Select “Variable” to allow volume adjustment by
• Analog RCU - Extended RC Support:
-
-
remote control.
- Select “Fix” to fix the current volume output level
and block adjustment by remote control.
Select “Disabled” to support all standard RC
commands for TUE-T150DV.
Select “Enabled” to activate the extended
command support for analog TV RC commands.
STB Setup
12-EN
Table of contents
Other Alpine TV Tuner manuals
Alpine
Alpine N852A - NVE - Navigation System User manual
Alpine
Alpine TUE-T112P User manual
Alpine
Alpine TUE-T151 User manual
Alpine
Alpine TUE-T152 User manual
Alpine
Alpine TUE-T012 User manual
Alpine
Alpine TUE-T151 User manual
Alpine
Alpine TCS-V430A User manual
Alpine
Alpine TUE-T252TX User manual
Alpine
Alpine TUE-T220DV User manual
Alpine
Alpine TUE-T252TX User manual
