Alphasonik V80BN User manual

V80BN

Dear Customer,

Thank you for purchasing Alphasonik’s headphones. Before

using these headphones, please read through the operations

manual to ensure the features are properly utilized.

WHAT’S INCLUDED

• V80BN Noise Canceling Headphones

• Hard shell carrying case

• Operations Manual

• 3.5mm Audio Cable (3m / 9.8ft.)

• Micro USB Charging Cable (1.2m / 4ft.)

TABLE OF CONTENTS

Table of Contents.......................................................................2

Specications.............................................................................3

Product Details.....................................................................4 - 5

Bluetooth Connection & LED Indicator......................................6

Controls......................................................................................7

Operations............................................................................8 - 9

Safety...............................................................................10 - 12

Warranty...........................................................................13 - 15

Battery 520mah

Charging Current 5V / 350mA

Charging Time 2 Hours

Estimated

Play Time

ANC OFF 30 Hours

ANC ON 20 Hours

Idle Power Consumption ANC O󰀨 <12mA

Idle Power Consumption ANC On <29mA

Bluetooth

Version 5.0

Frequency 2.402ghz-2.48ghz

Sensitivity -85dBm

Distance 10m / 33ft.

Noise Canceling Depth 25dB

Noise Canceling Bandwidth 20Hz - 500Hz

Noise Canceling E󰀨ective Frequency 40Hz - 400Hz

Impedance 2 x 32Ω

Frequency Response 20 - 20kHz

THD >0.7%

SPECIFICATIONS

ATTENTION

The control buttons are located on the outer-side of the

earpad cushion.

1. ANC LED Indicator

2. ANC Button

3. Headset

4. /-- Button

5. On/O󰀨 / Multi Function Button

6. /+ - Button

7. Status LED Indicator

8. Micro-USB Connector

9. Microphone

10. 3.5mm WIRED Input

HEADPHONE REQUIREMENTS

– Bluetooth source device must be Bluetooth 4.0 or higher.

– Micro USB Charging requirements: 5V / 500mA.

ATTENTION

Fully charge the headset before using for the rst time.

– The headset can be used while charging. The

LED will continue to ash red during charge.

CHARGING

1. Connect the micro USB cable to your headset and a

compatible USB power source.

2. During the charging process, the status LED will

illuminate red.

3. When the headset is fully charged, the status LED will

illuminate green. Disconnect your headset from the

power source.

LOW BATTERY

When the headsets battery becomes low, an audible

warning will be announced to charge the unit soon.

PRODUCT DETAILS CONTINUEDPRODUCT DETAILS

4 5

ATTENTION

This process only needs to be programmed once. After successfully

programming the headset the unit will automatically connect to the

device when in Bluetooth range and is enabled.

1. Activate the Bluetooth function on your compatible device.

2. Press and hold down the multi function button for ve seconds.

The status LED will start to ash RED and BLUE alternately.

3. Search for V80BN in the list of the compatible device and

select connect to device.

4. The statue LED will start to ash BLUE slowly after a

successful connection.

LED INDICATOR

ANC LED Illuminates Blue ANC ON

STATUS LED

Flashes Red & Blue In pairing mode

Blinks Blue Slowly Connected to

compatible device

Illuminates Red Headset Charging

Illuminate Green Headset Charged

CONTROLS BUTTONS ACTION

Turn On On/O󰀨 Multi function button Press for 3 secs.

Pairing Mode On/O󰀨 Multi function button Press for 5 secs.

Play / Pause On/O󰀨 Multi function button Short Press

Volume UP /+ - Button Long Press

Volume DOWN /+ - Button Long Press

Next Track /+ - Button Short Press

Previous Track /+ - Button Short Press

Accept a Call On/O󰀨 Multi function button Short Press

Reject a Call On/O󰀨 Multi function button Press for 2 secs.

End Call On/O󰀨 Multi function button Short Press

Turn O󰀨 On/O󰀨 Multi function button Press for 3 secs.

Switch ANC On/O󰀨 ANC Button Press for 2 secs.

CONTROLSBLUETOOTH CONNECTION

6 7

WIRED MODE:

1. Using the 3.5mm cable, connect one end to your audio

source and the other end to the 3.5mm audio port.

2. Control the playback on the source unit.

(NOTE: VOLUME CONTROL)

The volume settings on the source unit also a󰀨ect the

playback volume on the headset.

TURN OFF:

Turn o󰀨 your headset by holding down the On / O󰀨 multi

function button for three seconds. The status LED will

illuminate red briey and then turn o󰀨.

NOISE CANCELING:

When Noise Canceling (ANC) is activated, the

ambient noise that is picked up from the top of the microphone

is automatically counter measured. The Noise Canceling

feature signicantly reduces the surrounding ambient noise.

1. Switch the Noise Canceling ON by pressing the ANC

button for 2 seconds. The blue LED will illuminate.

2. Turn OFF the Noise Canceling by pressing the ANC button

for 2 seconds. The blue LED illumination on the left-side

of the headphone will turn o󰀨.

NOTE:

If the noise canceling is turned on, all ambient

noise will be reduced.

TURNING ON:

Turn on the headset by pressing the On / O󰀨 Multi function

button for three seconds. The status LED will ash blue rapidly

indicating that the headset is searching for a device that has

been paired already. Once connected, the LED will ash blue

slowly. After the device has been learned, it will automatically

connect when in range.

BLUETOOTH MODE:

1. Connecting a device (see section Bluetooth Connection).

2. Start playback on the device and use the headset or

source unit to control the playback.

(NOTE: VOLUME CONTROL)

The volume settings on the source unit also

a󰀨ect the playback volume on the headset.

OPERATION OPERATION CONTINUED

8 9

• Modication or alteration of this product will a󰀨ect this

product safety and injury can occur.

• All modications and repairs to this device or

accessories may only be carried out by Alphasonik or by

persons expressly authorized by Alphasonik.

• Be sure to charge the product with an outlet that is

easily accessible so you can quickly unplug the unit in

an emergency.

• Never attempt to open the product yourself.

• Do not subject the headphones to strong impact.

• Do not store the headphones under direct sunlight, near

heating devices or in a hot, humid or dusty place. Do not

allow the headphones to get wet.

• Connect/disconnect the cord by holding the plug. Pulling

directly on the cord can result in a broken wire and the risk

of electric shock.

• Do not wind the cord around the portable audio device.

This may damage or sever the cord.

• To ensure compatibility and correct usage, always consult

the user manual of any device before connecting the

headphones to it.

• The cord may become caught or severed if product is

placed in a bag or pocket without adequate protection.

Always store the product in the included case.

• Never immerse the headset in water or other liquids.

• To prevent damage to your hearing, do not raise the

volume too high. Listening to loud sound for an extended

period may cause temporary or permanent hearing loss.

• This product produces strong magnetic elds. These

may interfere with pacemakers and implanted

debrillator (ICDs). Always keep a distance of at least

6 inches between the headset and pacemakers and/or

implanted debrillator.

• Never use the headphones while driving a car, riding a

motorcycle or bicycle or operating any other vehicle.

• Do not use the headphones in places where the inability

to hear ambient sound presents a serious risk (such as at

railroad crossings, train stations, construction sites or on

roads where vehicles and bicycles are traveling).

• Discontinue use if skin irritation results from direct contact

with the product.

SAFETY CONTINUEDSAFETY

10 11

• Alphasonik will not be liable in any way for any loss of data

in the unlikely event that such losses should occur while

using this product.

• Please minimize the volume on your audio device before

connecting the headphones in order to avoid hearing

damage from sudden exposure to excessive volume.

• Be sure to purchase the appropriate conversion plug

adapter when connecting the headphones to equipment

with other than a 3.5 stereo headphone jack or smart-

phones of compatible models.

Alphasonik, warrants this product against all defects in ma-

terial and workmanship for a period of one (1) year from the

date of original purchase provided it was purchased from an

Authorized Alphasonik Dealer.

The conditions of this warranty and the extent of the

responsibility of Alphasonik, under this warranty are as follows:

1. DATED PROOF OF PURCHASE IS REQUIRED FOR

WARRANTY SERVICE OF THIS PRODUCT. Information

about Alphasonik authorized warranty service may also be

obtained at www.alphasonik.com or by emailing Alphason-

ik at [email protected].

2. This warranty will become void if service is performed

by any one other than an approved Alphasonik Warranty

Service Center.

3. This warranty does not apply to any product which has

been subjected to misuse, neglect or accident, or which

has had the warranty seal broken, serial number altered,

defaced or removed, or which has been connected, in-

stalled adjusted or repaired other than in accordance with

the instructions furnished by Alphasonik.

SAFETY CONTINUED WARRANTY

12 13

4. This warranty does not cover static, electrical interference,

adjustments or labor costs for the removal or reinstallation

of the unit for repair.

5. The sole responsibility of Alphasonik under this warranty

shall be limited to the repair or replacement thereof, at the

sole discretion of Alphasonik.

6. If it becomes necessary to send the product or any

defective part to Alphasonik or an authorized service

station, the product must be shipped in its original or

equivalent carton, fully insured, with shipping charges

prepaid. Alphasonik will not assume any responsibility for

any loss or damage incurred in shipping.

7. This warranty is not transferable and protects the original

purchaser provided they reside and made their purchase

in the United States. International consumers may contact

their local retailer or distributor for warranty information.

8. ALL IMPLIED WARRANTIES, EXCEPT TO THE EXTENT

PROHIBITED BY APPLICABLE LAW, SHALL HAVE NO

GREATER DURATION THAN THE WARRANTY PERIOD

SET FORTH ABOVE. UNDER NO CIRCUMSTANCES

SHALL ALPHASONIK BE LIABLE FOR ANY LOSS OR

DAMAGE, DIRECT OR CONSEQUENTIAL, ARISING OUT

OF THE USE OR INABILITY TO USE THE PRODUCT.

BECAUSE SOME STATES DO NOT ALLOW LIMITATIONS

ON HOW LONG AN IMPLIED WARRANTY LASTS OR

EXCLUSIONS OR LIMITATIONS OF INCIDENTAL OR

CONSEQUENTIAL DAMAGES, THE ABOVE LIMITATIONS

OR EXCLUSIONS MAY NOT APPLY TO YOU.

9. THIS WARRANTY GIVES YOU SPECIFIC LEGAL

RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS

THAT VARY FROM STATE TO STATE.

10. Should you have any di󰀩culties with the performance

of this product during warranty or with any Alphasonik

authorized service center, you may contact Alphasonik by

emailing us at [email protected].

WARRANTY CONTINUED WARRANTY CONTINUED

14 15

Other Alphasonik Headphones manuals

Alphasonik

Alphasonik V50BT User manual

Popular Headphones manuals by other brands

Sony

Sony MDR-NC8 Specifications

AUSounds

AUSounds AU-Stream quick start guide

ENERGY SISTEM

ENERGY SISTEM Style 7 user manual

Philips

Philips SHE3622 Specifications

Insignia

Insignia NS-CAHBTSPORT quick start guide

Movie Vision

Movie Vision HP-400 Operation manual

MobiFren

MobiFren SM Pro user guide

Motorola solutions

Motorola solutions PMLN8120 user manual

Jaybird

Jaybird freedom Faq

Sony

Sony MDR-ED12LP manual

HiFuture

HiFuture Tidy Buds Pro user manual

Creative

Creative CB2530 user guide

Renkforce

Renkforce RF FTVK-100 operating instructions

Philips

Philips SHQ3000 Specifications

Sennheiser

Sennheiser 500371 instruction manual

Califone

Califone 2924AV Specifications

Philips

Philips EARGEAR HE205 Series Specifications

Technics

Technics EAH-AZ80 manual