This document at a glance
10Deserializer Board FPD-Link III Coax to CSI-2 User Guide V1.0.0
Note
Shipping contents
The delivery consists of
• Deserializer Board FPD-Link III Coax to CSI-2
• 1 preassembled jumper for 5 VDC over FPC (default power mode)
• 1 jumper to enable 12 VDC over terminal connector..
What else do you need?
This is a selection of helpful downloads:
Read this document carefully
Learn to use deserializer boards in the most safe and efficient way and avoid
damage to your embedded system.
Input power settings
See Connecting power on page 34 for jumpers and connections.
Cables are not included
MIPI CSI-2 FPC cables to connect to the host and to the deserializer board and
FAKRA coaxial cables to connect the deserializer board to Alvium FP3/GM2 Coax
cameras are not included.
Download Link
Camera documentation for installation
and operation:
• Alvium FP3/GM2 Coax User Guide
• Alvium CSI-2 Cameras User Guide
www.alliedvision.com/en/support/technical-documentation/
alvium-csi-2-documentation/
Accessories, such as FAKRA coaxial
cables, FPC cables, I/O cables, lenses,
and tripod adapters
www.alliedvision.com/en/products/accessories
SerDes Configurator: Please contact
the Allied Vision Support team at...
www.alliedvision.com/en/about-us/contact-us/
technical-support-repair-/-rma
Table 1: Downloads for Deserializer Board FPD-Link III Coax to CSI-2
