Basic Operations Step 5
Creating groups
Records are organized in groups.The name can be customized
and used e.g. for reference to action, animal status or location.
One group can contain up to a maximum of 10.000 records.
Enable the “Animal Counter’to make sure that aduplicated
record is not saved in the same group.
1. To create a new group, press the New Group key.
2. Insert a new name for the group. Use the / keys to
open a keyboard.
3. Press Close.
4. Check and confirm the name by pressing the key.
Note that only very basic operations are included in this Quick Guide.For additional
information, refer to the User Guide.
If no group has been created manually before the first tag is read, the device creates agroup
with the default name ‘Group 1’ automatically.If you want the name of the first group to be
different, you must insert agroup before scanning for tags.
For additional information, refer to the User Guide.
Set Active Group
Menu > Data > Set Active Group
It is possible to switch back to an existing group and activate it again.
This means you can add tags to the previous group by scanning them
after the activation of that group.
For more information, see the Application Note for Set Active Group.
Reading and Assigning to Groups
1. Create or select agroup.
2. Scan for the ID tag.
3. The new scanning is automatically added to the active group
until you create anew group or switch the active group.
