Allen-Bradley C Series User manual

Publication 2711-IN040A-MU-P - October 2003

Installation Instructions

Display Backlight for PanelView 600 (Series C)

English Section

This instruction sheet describes how to replace the backlight in the following

PanelView terminal:

Kit Contents

•Replacement backlight (quantity 2)

•Bezel screws (quantity 6)

•Display mounting plate screws (quantity 4)

The backlight uses Cold Cathode Fluorescent Lamp (CCFL) tubes to illuminate the

display.

Terminal Backlight Catalog Number

PanelView 600 (Series C) 2711-NL5

TIP This publication excludes PanelView 600 Touch only.

ATTENTION •Disconnect all power from the PanelView terminal before

replacing the backlight. Failure to disconnect power may

result in electrical shock and/or damage to the terminal.

•Do not touch any of the exposed electronic components

to prevent damage from electrostatic discharge (ESD).

•Installer must use proper Anti-ESD equipment.

4Display Backlight for PanelView 600 (Series C)

Publication 2711-IN040A-MU-P - October 2003

To Remove the Backlight

1. Turn off the power to the PanelView terminal.

2. Lay terminal on front. Remove six bezel screws from the shroud.

3. Turn terminal over and rest on back cover.

4. Open bezel to the right. Use caution with cables; prop up bezel so cables

are not strained.

Bezel

Screws

Bezel

Screws

Display Backlight for PanelView 600 (Series C) 5

Publication 2711-IN040A-MU-P - October 2003

5. Disconnect cables to backlights.

6. Unscrew 4 display mounting plate screws.

7. Turn display to side, remove backlights by pressing tab and gently pulling

straight out on wires.

8. Properly dispose of old tubes.

Display Mounting Screws

6Display Backlight for PanelView 600 (Series C)

Publication 2711-IN040A-MU-P - October 2003

To Install the Backlight

1. Install new backlights. Ensure backlights click into place.

2. Place display mounting plate over standoffs and install four display

mounting plate screws. (Replacement screws are provided.) Torque to 6 to 8

in-lb (0.68 to 0.90 Nm).

3. Plug backlights into appropriate cable, making sure cables click together

firmly.

4. Ensure back of display window is clean and slide bezel into place making

sure to be careful with the bezel connection.

5. Install six bezel screws. (Replacement screws are provided.) Torque to 12 to

14 in-lb (1.35 to 1.58 Nm).

6. Apply power and verify operation of the backlight.

7. If the display does not illuminate, refer to the troubleshooting chart in the

PanelView Standard User Manual, publication 2711-UM014. Recheck all

connections and free pathways for cabling.

Other manuals for C Series

10

This manual suits for next models

1

Table of contents

Other Allen-Bradley Touch Terminal manuals

Allen-Bradley

Allen-Bradley 8510SA-TP Series User manual

Allen-Bradley

Allen-Bradley PanelView Plus 2711P User manual

Allen-Bradley

Allen-Bradley PanelView 5500 User manual

Allen-Bradley

Allen-Bradley FLEX I/O SCANport 1203-FB User manual

Allen-Bradley

Allen-Bradley 1797-TB3S User manual

Allen-Bradley

Allen-Bradley PanelView Plus 6 700 User manual

Allen-Bradley

Allen-Bradley PanelView Plus 7 User manual

Allen-Bradley

Allen-Bradley 2711-K6C series User manual

Allen-Bradley

Allen-Bradley PanelView 2711P-RW1 User manual

Allen-Bradley

Allen-Bradley PanelView Plus 400 User manual

Allen-Bradley

Allen-Bradley PanelView Plus 6 User manual

Allen-Bradley

Allen-Bradley PanelView 800 2711R-T4T User manual

Allen-Bradley

Allen-Bradley PanelView C200 User manual

Allen-Bradley

Allen-Bradley 1770-T1 User manual

Allen-Bradley

Allen-Bradley PanelView Plus 7 User manual

Allen-Bradley

Allen-Bradley DeviceNet 1790D-T16BV0 User manual

Allen-Bradley

Allen-Bradley PanelView 800 User manual

Allen-Bradley

Allen-Bradley PanelView 600 User manual

Allen-Bradley

Allen-Bradley PanelView Plus 6 User manual

Allen-Bradley

Allen-Bradley PanelView Plus 2711P User manual

Allen-Bradley

Allen-Bradley 2711P Instruction manual

Allen-Bradley

Allen-Bradley MobileView 2711T-T10R1N1 User manual

Allen-Bradley

Allen-Bradley 1790-T16BV0X User manual

Allen-Bradley

Allen-Bradley 2711-TBDC User manual

Popular Touch Terminal manuals by other brands

Wincor Nixdorf

Wincor Nixdorf iPOS plus Advanced user manual

Ingenico

Ingenico AXIUM EX4000 user guide

Heisei Electronics

Heisei Electronics Q-POS 815 user guide

Amano

Amano MTX-15 installation guide

FLOWBIRD

FLOWBIRD CWT Compact Touch manual

Demco

Demco SP7 installation guide

Lathem

Lathem PC600 Series user guide

Partner

Partner MF-2352 user manual

NCR

NCR RealPOS 7460-2 supplementary guide

Simrad

Simrad MS50 Manual guide

Unitech

Unitech MR350 MKII Software guide

Jungheinrich

Jungheinrich WMT 210 Service manual

Motorola

Motorola MTP850 user guide

YASKAWA

YASKAWA 62H-MDC0 manual

MVG industries

MVG industries NeptuLink user manual

Price Industries Limited

Price Industries Limited FDC Installation, operation & maintenance manual

Honeywell

Honeywell TemaKey installation manual

EBN

EBN BPC65-B-A16G user manual