All Pond Solutions AP-IS-KIT User manual

AQUARIUM AIR

PUMP INSTRUCTION

MANUAL

AP-IS-KIT APO-KIT

O Connect your air pipe (4mm internal diameter) to the AP'S outlet(s)

O Place the AP above water level on a flat surface if possible

(this will reduce noise levels)

O Connect a non return valve between your air hose a few inches from

the AP (image 1)

O Position your air pipe in your aquarium with or without air

stone as required

O Plug in the AP

O Using the dial on the back Of the unit you can choose what speed

the pump operates at

•Regularly clean your air pipe and airstone (if in use) to ensure

maximum output and prolonged lifespan

•ALWAYS use a non-return valve on your AP's outlet(s) to ensure

water is not siphoned back into the AP

CONTENTS

AP-3-KIT

AP-I .5-KlT

•AP-I .5 Air Pump o

Air Stone x 1 0 Non-

return valve x 1 o

Air hose x 2m

0 AP-3 Air Pump

O Air Stone x 2 0

Non-return valve x 2

O Air hose x 4m

The pump comes complete with a generous supply of 3 core cable,

however, should any additional cable be required, then the use of an

approved waterproof cable connector is essential.

•The power supply must be earthed and fused at 3amp

•Regularly inspect the cable for damage and deterioration

•Consult a qualified electrician if in doubt about any aspects of

wiring

•DO not connect to any voltage Other than stated on pump

IMPORTANT! Disconnect mains electricity supply before attempting

installation, handling or maintenance.

•Never submerge the AP, it is designed to be run external to your fish tank

•Only for use in an aquarium environment

•Do not attempt to modify this unit in any way and only use the

recommended parts for replacement All connections must be earthed

•Do not connect to any voltage other than stated

•When installing your AP you must have a drip loop to avoid condensation

build up running up and down your power cable —please see (image 2)

for a detailed example of this

•If the unit fails, isolate completely from your aquarium and contact the

supplier

All Pond Solutions products are supplied with a warranty

guaranteeing parts in the event of a genuine fault or mechanical

failure for 12 months from date of purchase.

We do not accept liability for reasonable wear and tear, accidental

damage or problems arising from modification or misuse.

Spare parts are available at our official website or from your local

supplier. Please ensure that only genuine All Pond Solutions

components are used when completing a replacement or repair.

In the event Of product failure, not using the supplied non-return valve

may void your warranty.

This manual suits for next models

Table of contents

Other All Pond Solutions Water Pump manuals

All Pond Solutions

All Pond Solutions AP-1.5-KIT User manual

All Pond Solutions

All Pond Solutions FPP-600 User manual

All Pond Solutions

All Pond Solutions ACP-500 User manual

All Pond Solutions

All Pond Solutions 1400PP User manual

All Pond Solutions

All Pond Solutions FPP-3500 User manual

All Pond Solutions

All Pond Solutions 8000PP User manual

Popular Water Pump manuals by other brands

Neptun

Neptun NPHW 5500 operating instructions

Sensidyne

Sensidyne Gilian BDX-II Operation & service manual

Draper

Draper 47808 instructions

Trolla

Trolla 12820 manual

Sunfab

Sunfab SVH Series installation guide

WilTec

WilTec 50740 Operation manual

Fieldmann

Fieldmann FVC 5015 EK user manual

Everbilt

Everbilt EFSUB5-122HD Use and care guide

Graco

Graco Husky 3300e manual

esotec

esotec 101018 operating manual

moyno

moyno 2000 CC Service manual

Becker

Becker BASIC VASF 2.80/1-0.AC230 operating instructions

Sykes AmeriPumps

Sykes AmeriPumps GP100M Operation and maintenance instructions

DUROMAX

DUROMAX XP WX Series user manual

BRINKMANN PUMPS

BRINKMANN PUMPS SBF550 operating instructions

Franklin Electric

Franklin Electric IPS Installation & operation manual

Xylem

Xylem e-1532 Series instruction manual

Milton Roy

Milton Roy PRIMEROYAL instruction manual