ALDI Workzone PGG72H User manual
IM ed4; 07/2019
Read all safety warnings and all instructions thoroughly before operating this product.
Ensure you keep your manual in a safe place for future reference.
10282
15W GLUE GUN
Product
Info
https://help.tools/
22
QR codes take you where you want to go
quicky and easily
Whether you require product information, spare parts or
accessories, details on warranties or aftersales service, or if you
want to watch a product demonstration video, our QR codes will
take you there in no time at all.
What is a QR code?
A QR-code (QR=Quick Response) is a type of matrix that can be
read with a smartphone camera and that contains a link to a
website or contact details, for example.
Advantage: You are not required to manually enter a website
address or contact details.
How it works
To scan the QR code, all you need is a smartphone with QR
codes reader software and an Internet connection*. This type of
software can be downloaded for free from your smartphone’s
app store.
Try it out now
Just scan the QR code with your smartphone and find out more
about the Aldi product you have
purchased*.
* Depending on your tariff you may be charged for the connection.
Product
Info
3
Contents
Pack contents / parts……………………………………………..........…. 04
Description of symbols…………………………………………............. 05
General safety warnings…………………………………………........... 06
Component list……………………..………………………………............08
Assembly……………………………..………………………………............09
Operation…………………………….……………………………………......09
Maintenance……………………….………………………………….......... 11
Warranty……………………….……………………………………….......... 12
Environmental protection……….…….…….…………………............ 13
FAQ/Troubleshooting……………….…….…….…………………........... 13
Technical Specifications................................................................. 14
44
4
Pack contents / parts
Application
First time users or inexperienced operators pay particular attention to
the operation of the 15W Glue Gun, including details of starting and
stopping and correct use of the 15W Glue Gun on pages 9-11, as well as
the maintenance instructions on pages 11.
Intended use of 15W Glue Gun
NOTE: This product is for private domestic DIY use only. It is not
suitable for commercial or trade use.
This 15W Glue Gun is used for the quick gluing of clean, dry and
grease-free materials with glue heated to its melting point.
The glue gun is to be used only for its prescribed purpose. Any other
use is deemed to be a case of misuse.
Contents of carton
1 x 15W Glue Gun
12 x 100mm glue stick
1 x Stand / rest
1 x Instruction manual
1 x Warranty Card
• Remove all packing materials
• Ensure all parts on the contents list are present
• Check the appliance, and all accessories for transportation damages
55
5
To reduce the risk of injury, user must read instruction manual
Wear ear protection
Wear eye protection
Wear breathing protection
Conforms to relevant standards for electrical safety and
electromagnetic compatibility.
Double insulation
36 Month Warranty Period.
The rating plate on your Glue Gun may show symbols. These represent
important information about the product or instructions on its use.
36
Description of symbols
66
6
General safety warnings
General Power Tool Safety Warnings
WARNING Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
- This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person
responsible for their safety.
- Children should be supervised to ensure that they do not play with
the appliance.
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in order
to avoid a hazard.
Additional safety warnings for your glue gun
1. Before connecting the unit to the mains - ensure the unit is switched
OFF because it will achieve maximum heat in a little time.
2. Always wear protective gloves and eyewear because it can reach
83°C(+/-2%) Centigrade
3. Always place the appliance on its stand after use and allow
it to cool down before storage and never touch the heat
deflector.
4. Never attempt to use the appliance to dry animals, clothing or hair.
5. Never use this appliance as a hair dryer.
6. Be aware that heat may be conducted to combustible
materials that are out of sight.
77
7
General safety warnings
7. Be careful When using this appliance in places where there
are combustible materials or gases, extreme caution must be
taken to prevent fire or explosion.
8. Do not apply to the same place for a long time.
9. Do not use in presence of an explosive atmosphere. Always
use it in ventilated areas.
10.Do not leave the heat gun unattended when it is switched
on.
11. The appliance is not to be stored or left outdoors
12. This product is designed for light domestic use only, it is not
designed for commercial, industrial or trade purposes.
Glue Gun
AFTER SALES SUPPORT
(toll free)MODEL No.: PGG72H • 07/2019 10282
e-mail: [email protected]
AUS
8
1300 889 028
AUS
1. Nozzle with heat guard
2. Glue stick
3. Handle
4. Power cord
5. Flow control trigger
6. Support Stand / rest
7. 12 x Glue sticks
8. Glue stick entry
Component list
8
7
Glue Gun
AFTER SALES SUPPORT
(toll free) MODEL No.: PGG72H • 07/2019 10282
e-mail: [email protected]
AUS
9
1300 889 028
AUS
WARNING! Please read and understand this instruction
manual before use and keep it for your future reference.
Your glue gun should only be passed on together with this
instruction manual.
Assembly
Installing a glue stick (see fig. A)
WARNING. Disconnect the glue gun from the mains power
supply before making any adjustments or undertaking
maintenance procedures.
1. Insert the provided glue stick (2) into the glue stick entry (8).
2. Squeeze the flow control trigger (5) multiple times to allow the glue
stick (2) to be pushed down.
A
Operation
1. Switching on/off (see fig. B)
To put into operation
1) Insert the power plug into the mains power supply, and turn the
power switch on.
2) Place the gun on the support stand / rest (6). Allow the gun to heat
up for approximately 3 min before beginning work.
Glue Gun
AFTER SALES SUPPORT
(toll free)MODEL No.: PGG72H • 07/2019 10282
e-mail: [email protected]
AUS
10
1300 889 028
AUS
To switch off, turn off the mains power switch and pull the mains plug
out.
WARNING: Allow the unit to cool completely before storing.
The hot nozzle can cause damage.
NOTE: As the result of heat storage, the glue gun can also be used after
it has heated up without being connected to the mains. If the glue that
emerges becomes thick, insert the plug into the mains power supply again.
Warning: Disconnect the glue gun from the mains power
supply when not in use.
2. Gluing
Preparations for Gluing
The surfaces to be glued must be clean, dry and free of grease. A
smoother surface is also more ideal for gluing.
WARNING: Do not use inflammable solvents for cleaning!
The ambient temperature and the work piece to be glued must not be
cooler than +5 °C or warmer than +50 °C.
Warm rapidly cooling materials (e.g. steel) for better adhesion.
Gluing
1) Press the flow control trigger (5).
2) Apply the glue in dots around the edges of the workpiece surface.
For gluing flexible materials (e.g. textiles), apply the glue in a zig-zag
line.
B
This manual suits for next models
1
Table of contents
Popular Glue Gun manuals by other brands
Grizzly
Grizzly T1236 instructions
EINHELL
EINHELL TE-CG 18 Li Original operating instructions
SURTECO
SURTECO Dollken Profiles HKP 2.0 E Instruction handbook
Parkside
Parkside PHPA 20-Li A1 Translation of the original instructions
SURTECO
SURTECO Dollken Profiles HKP 220 Instruction handbook
Dollken
Dollken Profiles HKP 2.0 E Instruction handbook
