Alcofind AFM-5 User manual
AFM-5 AFM-P3
- Before using the device, read all instruction manual
carefully and then perform the test.
- The device should be recalibrated by expert every
12 months or when 500 tests have performed before
reaching 12 months.
Using without periodic calibration may result in
incorrect results.
- After drinking, eating, or smoking, wait at least 30
minutes before testing.
Not observing this waiting period can cause
inaccurate readings and damage to the sensor.
- Do not immerse the device in water.
- Certain substances could interfere with the results.
- Residual alcohol in the mouth can distort the
measurement.
- Aromatic drinks or mouth sprays containing alcohol
can interfere with measurements.
In this case, wait for 30 minutes or rinse the mouth
with pure water before testing.
- Do not permit to blow cigarette smoke into the tester,
which may damage the sensor.
- When not used for a long time, keep the device after
taking out the battery.
In case of testing after long-term storage, there might
be high tolerance of test results for the first time.
- When the battery indicator icon reaches emptiness,
replace the battery for the accuracy reasons.
IMPORTANT SAFETY INFORMATION
2
- In case the test result is higher than 0.1 %BAC
(1.0 g/L) and you try again without any interval, then
the warm up time might be delayed.
- Blowing hard may cause damage to the sensor as
saliva can flow into the sensor.
- Perform a test within the operating temperature which
is specified in the instruction manual.
- Do not shake, drop, or damage the device.
The impact of the device can cause malfunctioning,
especially during the process of analyzing the sample.
- Do not store the device in the place where the
temperature and humidity is high.
- It should be kept out of reach of children under
12 years of age.
- When the sensor of device gets damaged, it may
cause the device to measure higher even if you
don't consume any alcohol, or to detect no alcohol
even if you consume a large quantity of
alcohol. In this case, contact with the nearest
distributor or seller.
- Do not drink and drive. Even small amount of alcohol
may cause impairment in normal driving operation.
- Do not use this device as a tool to determine "drink
and drive".
The manufacturer and the sellers will not take any
legal responsibility for the test results.
3
- Mobile Breathalyzer
- An AAA battery
- 6 pieces of mouthpiece
- Carrying case
- Instruction manual
CONTENTS
NAME OF EACH PART
4
<AFM-5>
Mouthpiece
Battery cover
Power button
Mouthpiece slot
<Back> <Front>
<Back> <Front>
Mouthpiece
Battery cover
Power button
Mouthpiece slot
<AFM-P3>
1. Installing a battery
Step 1. Push up the bottom part of battery cover
to open it.
Step 2. Install an AAA battery in the battery compartment
by paying attention to the battery polarity.
Step 3. Insert bulging parts of the battery cover into the
slits, and then push down its cover so that it is
tightly closed.
PREPARATION
5
<AFM-5>
<AFM-P3>
Step 1. Press and pull up the battery cover by using any
plastic card to open it.
6
7
Step 2. Install an AAA battery in the battery compartment
by paying attention to the battery polarity.
Step 3. Press down the battery cover so that it is tightly
closed.
8
2. Inserting a mouthpiece
Step 1. Insert a mouthpiece into the slot on the side of the
alcohol tester. Ensure whether it securely fits or not.
It is highly recommended to use an extra
mouthpiece for every test for sanitary reasons.
<AFM-5>
<AFM-P3>
3. Installing the app
Step 1. Download "ALCOFIND" app from App store
(iOS) or Google Play Store (Android).
Note
Minimum requirements of Smartphone
- iPhone 4S running iOS 7 and above
- Android devices running OS 4.3 and above
Step 2. Open the app.
Select language and unit, and then press
OK button.
Note:
For changing language and
unit later, go to setting at the
bottom menu.
9
*The device is not compatible with any tablet
devices.
OPERATION WITH APP (APP MODE)
Step 1. Open the app.
Note Bluetooth must first be
switched on in order to
connect to the device.
(Go to the Settings on your
smartphone and turn on
Bluetooth.)
Step 2. To turn on the device, press and hold Power
button for a second until the Blue, Green and
Red LEDs appear on the device as shown in
the picture below.
10
<AFM-5> <AFM-P3>
(
Blue)
(
Green) (Red)
(
Green) (Red)
(
Blue)
This manual suits for next models
1
Table of contents
Other Alcofind Test Equipment manuals
Alcofind
Alcofind AF-100S User manual
Alcofind
Alcofind DA-9000 series Use and care manual
Alcofind
Alcofind AF-50 User manual
Alcofind
Alcofind AF-50 AD User manual
Alcofind
Alcofind DA-7000 User manual
Alcofind
Alcofind DA-8100 User manual
Alcofind
Alcofind DA-7100 User manual
Alcofind
Alcofind da-8000 User manual
Alcofind
Alcofind DA-5000 User manual
