Alcatel LINKZONE User manual

CJBXXXXALAAA

Quick Start Guide

www.sar-ck.com

This product meets applicable

naonal SAR limits of 1.6 W/kg.

The specic maximum SAR values

can be found in the Radio Waves

secon of this user guide.

When carrying the product or using

it while worn on your body, either

use an approved accessory such as

a holster or otherwise maintain a

distance of 10 mm from the body

to ensure compliance with RF

exposure requirements. Note that

the product may be transming

even if you are not surng the

Internet.

Safety and use

We recommend that you read this chapter carefully before

using this device. The manufacturer disclaims any liability

for damage, which may result as a consequence of improper

use of this device or of use contrary to the instrucons

contained herein.

Do not switch on your device when its use is

prohibited or when using the device may cause

interference or danger.

Follow rules or regulaons in hospitals and health

care facilies. Switch o your device near medical

apparatuses.

Switch o your device when on an aircra. The

device may cause interference to aircra control

signals.

Switch o your device near high-precision electronic

devices. The device may aect the performance of

these devices.

Do not aempt to disassemble your device or its

accessories. Only qualied personnel are allowed to

service or repair the device.

Do not place your device or its accessories in

containers with a strong electromagnec eld.

Do not place magnec storage media near your

device. Radiaon from the device may erase the

informaon stored on them.

Do not subject your device to high temperatures or

use it in a place with ammable gas such as a gas

staon.

Keep your device and its accessories away from

children. Do not allow children to use your device

without guidance.

Only use approved baeries and chargers to avoid

the risk of explosion.

Observe the laws or regulaons on device use.

Respect others’ privacy and legal rights when using

your device.

It is recommended that the equipment only be used in an

environment where the temperature is between 0°C and

45°C and humidity is between 10% to 90%.

CHARGERS

Main powered chargers will operate within the temperature

range of: 0°C to 40°C.

The chargers designed for your device meet with the

standard for safety of informaon technology equipment

and oce equipment use.

Due to dierent applicable electrical specicaons, a

charger you purchased in one jurisdicon may not work in

another jurisdicon. They should be used for this purpose

only.

Overview

LinkZone is a portable wireless router, providing a simple

way to share 4G with any Wi-Fi embedded device.

Package contents

LinkZone USB cable

Quick start guide Charger

Applicaon

LinkZone

PAD

Smart phone

Geng to Know Your Device

Power key

LED indicator

WPS key

USB jack

LED Descripon

Part Descripon

Power key Hold the “Power” key for 3 seconds

to power the device on/ o.

WPS key Hold “WPS” key for 3 seconds to

acvate the WPS funcon. Once

acvated, the Wi-Fi LED indicator

will ash every two seconds. If the

network is not accessed within 2

minutes device will automacally exit

WPS mode.

LED indicators Displays signal, Wi-Fi, SMS, and

baery charge status.

Charging /

USB Port

Use the USB jack to charge your

device and connect your device to

the client via the USB cable.

Reset Hold both “Power” and “WPS” keys

simultaneously for 6 seconds. All

LED indicators will ash blue 4 mes

to indicate that the device has been

reset to factory mode.

Reboot Hold “Power” key for 10 seconds to

restart device.

Part Descripon

Power saving

mode

• If no buons are pressed for a

period of 30 seconds, all LED

lights will turn o automacally.

Press any buon, charge device, or

connect to a computer, to turn on

LED lights again.

• If no Wi-Fi is accessed for a period

of 10 minutes, network dialing

ceases automacally. Press any

buon, or access the device, to

turn on Wi-Fi again.

• If no Wi-Fi is accessed for a period

of 30 minutes, the Wi-Fi AP

funcon will turn o automacally.

Press any buon to turn on Wi-Fi

AP again.

Indicators

When the hotspot is powered on, the following icons will

illuminate. For a descripon of the icons, please refer to the

table below:

Network Indicator (Red or Blue LED)

Wi-Fi Indicator (Blue LED)

SMS Indicator (Blue LED)

Baery Indicator (Red or Blue LED)

LED Descripon

Network

Indicator

Solid Blue Registered and connected

to network.

Flashing Blue Network disconnected.

Solid Red No network, no SIM card

or SIM card error, limited

or no service.

Wi-Fi Solid Blue Wi-Fi is acve.

SMS Solid Blue New message

Flashing Blue Message inbox is full.

Baery Slow Flashing

Blue

Working

Quick Flashing

Blue

The baery is charging

and is plugged into a

power source.

Solid Blue The baery is fully

charged and is plugged

into a power source.

Flashing Red The baery level is less

than 10%.

Turning On Your Device

Step 1: Remove back cover:

Slot

Note: Find the slot on the front cover to open.

Step 2: Install Micro SIM Card and SD Card:

Micro SIM Card

Step 3: Install baery:

Step 4: Close back cover:

Posion the back cover so that locang nub is inserted

into corresponding indentaon (please refer to illustraon

below)

Step 5: Power device on:

Long Press the “Power” key unl all LED indicators

illuminate in blue.

Connecng in Wi-Fi mode

SSID: locate the SSID informaon on the scker on the Back

Cover.

Step 1: Use the Wi-Fi manager on the Wi-Fi embedded

device to select network name (SSID).

• From a Windows PC: Right-click Wireless network

connecon on the task bar, and select: View Available

Networks.

Popular Network Router manuals by other brands

Allnet

Allnet ALL0333AU user guide

HomeSeer

HomeSeer HT-SEL Getting started guide

Sercomm

Sercomm Genesis OC3505D Quick installation guide

Billion

Billion BIPAC 5102 Series user manual

TP-Link

TP-Link TD-8817 QIG

Motorola

Motorola MR1900 user guide

Digi

Digi IX14 user guide

Cisco

Cisco NCS 540 Hardware installation guide

XAVi

XAVi X8821e user manual

BEC

BEC 6200WZL Quick installation guide

MikroTik

MikroTik hAP ac3 Series quick start

Korenix

Korenix JetNet 5428G Series user manual

NETGEAR

NETGEAR FS526T - Switch installation guide

Korenix

Korenix JetNet 5710G Series user manual

Automated Logic

Automated Logic ZN551 Technical instructions

Cisco

Cisco ASR 1000 Series Installation and configuration guide

EnGenius

EnGenius ESR-9710 quick start guide

Cisco

Cisco 805 Series Product overview