Akuvox IT88 Series User manual
About This Manual
Thank you for choosing the Akuvox IT88 series indoor monitor. This manual
is intended for the administrators who need to properly configure the indoor
monitor. This manual applies to the 88.30.110.302 version, and it provides all
the configurations for the functions and features of the IT88 series door
phone. Please visit the Akuvox forum or consult technical support for any
new information or the latest firmware.
Any Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment .
This transmitter must not be co ‐located or operating in conjunction with
any other antenna or transmitter.
This equipment should be installed and operated with minimum distance
20cm between the radiator&you body.
IT88 Series Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com
4
1.Product Overview
IT88 series is an Android SIP-based with a smooth touch-screen indoor
monitor. It can be connected with the Akuvox door phone for audio/video
communication, unlocking, and monitoring.Residents can communicate with
visitors via audio/video call, and it supports unlocking the door remotely. It is
more convenient and safer for residents to check the visitor’s identity
through its video preview function. IT88A series are often applied to
scenarios such as villas, apartments, and buildings.
2.Change Log
The change log will be updated here along with the changes in the new
software version
IT88 Series Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com
5
3.Introduction to Configuration Menu
Status: This section gives you basic information such as product information,
Network Information, and account information, etc.
Account: This section concerns SIP account, SIP server, proxy server,
transport protocol type, audio&video codec, DTMF, session timer, etc.
Network: This section mainly deals with DHCP&Static IP setting, RTP port
setting, and device deployment, etc.
Phone: This section includes Time&language, call feature, dial management,
data import&export, door log, web relay.
Contacts: This section allows the user to configure the local contact list
store in the device.
Upgrade: This section covers Firmware upgrade, device reset&reboot,
configuration file auto-provisioning, PCAP.
Security: This section is for Password modification, account status & session
time out configuration, as well as service location switching.
Settings: This section is including the RTSPD & voice assistance set up.
Arming: This section covers the configuration including, arming zone setting,
arming mode, disarm code, and alarm action.
Mode selection:
Discovery mode: It is a plug and plays configuration mode. Akuvox devices
will configure themselves automatically when users power on the devices
and connect them to the network. It is super time-saving mode and it will
greatly bring users convenience by reducing manual operations. This mode
requires no prior configurations previously by the administrator.
Cloud mode: Akuvox SmartPlus is an all-in-one management system.
Akuvox SmartPlus is the mobile service that allows audio, video, remote
IT88 Series Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com
6
access control between smartphones and Akuvox intercoms. All
configurations in the device will be issued automatically from the cloud. If
users decide to use Akuvox SmartPlus, please contact Akuvox technical
support, and they will help you configure the related settings before using
them.
SDMC mode: SDMC (SIP Device Management Controller) is a simple and
comprehensive software for building management. It provides a topography
for a community while offering you a graphical configuration interface for the
door access, intercom, monitoring, alarm, etc. It is a convenient tool for
property managers to manage, operate, and maintain the community.
Tool selection
Akuvox has many configuration tools for you to set up devices more
conveniently. Here we list some common tools, please contact your
administrator to get the tool if you need them.
1. SDMC: SDMC is suitable for the management of Akuvox devices in large
communities, including access control, resident information, remote
device control, etc.
2. Akuvox Upgrade tool: upgrade Akuvox devices in batch on a LAN(Local
Area Network)
3. Akuvox PC Manager: distribute all configuration items in batch on a LAN.
4. IP scanner: it is used to search Akuvox device IP addresses on a LAN.
5. FacePro: manage face data in batch for the door phone on a LAN.
IT88 Series Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com
7
4.Access the Device
Akuvox indoor monitor system settings can be either accessed on the device
directly or on the device web interface.
4.1. Device Start-up Network Selection
Akuvox indoor monitor system settings can be either accessed on the device
directly or on the device's web interface. After the device boots up initially,
you are required to select the network connection for the device. You can
either select ethernet or wireless network connection according to your need.
Note:
Please refer to the chapter on Network Setting&Other connection
for the configuration of the Ethernet and wireless network
connection.
4.2. Accessing the Device Setting on the Device
4.2.1.Accessing Device Basic Setting.
You can access the device's basic setting and advance setting where you
IT88 Series Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com
8
can configure different types of functions as needed. To access the device
basic setting by pressing Setting icon. To checking the basic information like
MAC, firmware and ect.
4.2.2.Accessing Device Advanced Setting
To access the advanced setting, press Setting then press Advanced Settings
icon. Press password 123456 to enter the advanced setting.
4.3. Access the Device Setting on the Web
Interface
You can also enter the device IP address on the web browser in order to log
in the device web interface by user name and password admin/admin where
you can configure and adjust parameter etc.
For checking IP address you can search in device Setting > System Info >
Network screen. Or searching by IP scanner tool which in the same LAN with
the devices.
IT88 Series Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com
9
Note:
You can also obtain the device IP address using the Akuvox IP
scanner to log in the device web interface. Please refer to the
URL below for the IP scanner application:
https://knowledge.akuvox.com/docs/akuvox-ip-scanner
Note:
Google Chrome browser is strongly recommended.
The Initial user name and password are “admin” and please be
case-sensitive to the user names and passwords entered.
IT88 Series Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com
10
5.Language and Time Setting
5.1. Language Setting
When you first set up the device, you might need to set the language to your
need or you can do it later if needed. Language setting can be configured on
the device that allows you to select or change the language for screen
display to your preference. To configure the language display on the device
Settings > Time&Language screen.
5.2. Time Setting
Time setting can be set up on the device and on the device web interface in
terms of time zone, date and time format etc.
5.2.1.Time Setting on the Device
To set up time setting on the device Settings > Time&Language screen.
Parameter Set-up:
Other manuals for IT88 Series
1
Table of contents
Other Akuvox Monitor manuals
Akuvox
Akuvox IT82 Series User manual
Akuvox
Akuvox C319 Series Service manual
Akuvox
Akuvox C319A Manual
Akuvox
Akuvox IT82 Series User manual
Akuvox
Akuvox IT83 Series Manual
Akuvox
Akuvox C313W-2 User manual
Akuvox
Akuvox C317 Series User manual
Akuvox
Akuvox C313 Series User manual
Akuvox
Akuvox C313 Series Manual
Akuvox
Akuvox C313X User manual
