Aktakom ADS2061 User manual
ADS Series
Smart Digital Storage Oscilloscopes
User Manual
■ADS2061
■ADS2111
■ADS2121
■ADS2221
WWW.AKTAKOM.COM
General Warranty
The AKTAKOM warrants that the product will be free from defects in materials and
workmanship for a period of three year from the date of purchase of the product by the
original purchaser from the AKTAKOM Company. And the warranty period of
accessories such as probe, battery, adapter is one year. This warranty only applies to the
original purchaser and is not transferable to the third party. If the product proves defective
during the warranty period, AKTAKOM either will repair the defective product without
charge for parts and labor, or will provide a replacement in exchange for the defective
product. Parts, modules and replacement products used by AKTAKOM for warranty work
may be new or reconditioned to like new performance. All replaced parts, modules and
products become the property of AKTAKOM.
In order to obtain service under this warranty, Customer must notify AKTAKOM of the
defect before the expiration of the warranty period. Customer shall be responsible for
packaging and shipping the defective product to the service center designated by
AKTAKOM, and with a copy of customer proof of purchase.
This warranty shall not apply to any defect, failure or damage caused by improper use or
improper or inadequate maintenance and care. AKTAKOM shall not be obligated to
furnish service under this warranty a) to repair damage resulting from attempts by
personnel other than AKTAKOM representatives to install, repair or service the product; b)
to repair damage resulting from improper use or connection to incompatible equipment; c)
to repair any damage or malfunction caused by the use of non-AKTAKOM supplies; or d)
to service a product that has been modified or integrated with other products when the
effect of such modification or integration increases the time or difficulty of servicing the
product.
Please contact the nearest AKTAKOM’s Sales and Service Offices for services or a
complete copy of the warranty statement.
Excepting the after-sales services provided in this summary or the applicable warranty
statements, AKTAKOM will not offer any guarantee for maintenance definitely declared or
hinted, including but not limited to the implied guarantee for marketability and special-purpose
acceptability. AKTAKOM should not take any responsibilities for any indirect, special or
consequent damages.
User Manual of Smart Digital Storage Oscilloscope
i
Table of Contents
1. General Safety Requirements.......................................................................................... 1
2. Safety Terms and Symbols............................................................................................... 2
3. General Characteristics................................................................................................... 4
4. Junior User Guidebook ................................................................................................... 5
Introduction to the Structure of the Oscilloscope..................................................................... 6
Front panel ............................................................................................................................................... 6
Left side panel .......................................................................................................................................... 7
Right side panel ........................................................................................................................................ 7
Rear Panel ................................................................................................................................................ 8
Control (key and knob) area ..................................................................................................................... 9
User interface introduction.......................................................................................................10
How to implement the General Inspection.............................................................................. 12
How to implement the Function Inspection............................................................................ 13
How to Implement the Probe Compensation..........................................................................14
How to Set the Probe Attenuation Coefficient........................................................................14
How to Use the Probe Safely.....................................................................................................15
How to Implement Auto-calibration........................................................................................16
Introduction to the Vertical System......................................................................................... 16
Introduction to the Horizontal System.................................................................................... 17
Introduction to the Trigger System ......................................................................................... 18
5. Advanced User Guidebook ............................................................................................ 20
How to Set the Vertical System................................................................................................21
Implementation of Mathematical Manipulation Function ...................................................................... 25
Using FFT function ................................................................................................................................ 27
Application of VERTICAL POSITION and VOLTS/DIV Knobs........................................ 31
How to Set the Horizontal System ...........................................................................................31
How to set the Trigger System .................................................................................................34
Single trigger .......................................................................................................................................... 34
Alternate trigger ..................................................................................................................................... 38
How to Operate the Function Menu........................................................................................ 42
How to Implement Sampling Setup ....................................................................................................... 42
How to Set the Display System .............................................................................................................. 44
How to Save and Recall a Waveform ..................................................................................................... 49
How to Record/Playback Waveforms .................................................................................................... 51
How to Implement the Auxiliary System Function Setting .................................................................... 54
How to Measure Automatically.............................................................................................................. 58
User Manual of Smart Digital Storage Oscilloscope
ii
How to measure with cursors ................................................................................................................. 62
How to use Autoscale ............................................................................................................................. 67
How to Use Executive Buttons............................................................................................................... 69
6. Demonstration ............................................................................................................... 71
Example 1: Measurement of Simple Signals........................................................................... 71
Example 2: Gain of the Amplifier in the Metering Circuit ...................................................72
Example 3: Capture the Single Signal.....................................................................................73
Example 4: Analyze the Details of a Signal............................................................................. 75
Example 5: Application of X-Y Function................................................................................ 77
Example 6: Video Signal Trigger.............................................................................................78
7. F.A.Q .............................................................................................................................. 80
8. Technical Specifications................................................................................................ 82
General Technical Specifications............................................................................................. 86
9. Appendix ........................................................................................................................ 87
Appendix A: Enclosure............................................................................................................. 87
Appendix B: Maintenance, Cleaning and Repairing .............................................................87
Appendix C: Battery Using Guide........................................................................................... 88
User Manual of Smart Digital Storage Oscilloscope
1
1. General Safety Requirements
Before any operations, please read the following safety precautions to avoid any
possible bodily injury and prevent this product or any other products connected
from damage. In order to avoid any contingent danger, this product is only used
within the range specified.
Only the qualified technicians can implement the maintenance.
Prevent the Fire or Bodily Injury.
Connect the probe correctly. The grounding end of the probe corresponds to the
grounding phase. Please don't connect the grounding end to the positive phase.
Use the proper power line. Only use the power cord specially provided for this product
or that has been approved to be used in this user state.
Connect or Disconnect Correctly. When the probe or testing wire is connected to the
power lead, please do not connect and disconnect the probe or testing wire at random.
Product Grounded. This product is grounded through the power lead grounding
conductor. In order to prevent any electric shocking, the grounding conductor must be
connected to the ground. It requires guarantee that this product has been already grounded
correctly before any connection with its input or output terminal.
When powered by AC power, it is not allowed to measure AC power source directly,
because the testing ground and power cord ground conductor are connected together,
otherwise, it will cause short circuit.
When powered by battery, the product must ground connection. To avoid electric shock,
there must be a ground wire connect between ground and the ground port (on the back of
product panel).
Pay attention to the nominal values of all terminals. In order to prevent any fire or
electric shock risks, please pay attention to all the nominal values and marks of this
product. Before implement any connections for this product, please read the user's manual
of this product to understand the information about the rated values further.
Do not make any operations without the instrument cover installed. If the cover or
panel has already been removed, please don't operate this product.
Use the proper fuse. Only the fuse complying with the specified type and nominal value
for this product can be used.
Avoid touching any exposed circuit. When the product is on power, please don't touch
the uncovered contacts and parts.
Please don't make any operations while there is an uncertain fault emerged. If
suspecting damage to this product, please contact the qualified maintenance personnel for
check.
Keep a good ventilation condition. Please consult the detailed installation instruction in
the user's manual so that this product can be erected correctly, keeping it under a good
ventilation condition.
Please do not make any operations in a moist environment.
Please do not make any operates in an explosive environment.
Keep the products surface clean and dry.
User Manual of Smart Digital Storage Oscilloscope
2
2. Safety Terms and Symbols
Safety Terms
Terms in this manual: The following terms may appear in this manual:
Warning: Awarning statement indicates the conditions and actions which may
endanger the life safety.
Note: A note statement indicates the conditions and actions which may cause
damage to this product or other property.
Terms on the product: The following terms may appear on this product:
Danger: It indicates that there may be an immediate injury to you when you encounter
this mark.
Warning: It indicates that there may not be an immediate injury to you when you
encounter this mark.
Note: It indicates that there may be damage to this product or other property.
Safety Symbols
Symbols on the product: The following symbol may appear on the products:
High Voltage
Please Consult the Manual
Protective Ground End
Earth End on the Shell
Grounding End for Measurement
User Manual of Smart Digital Storage Oscilloscope
3
To avoid body damage and prevent product and connected equipment dam. This product
can only be used in the specified applications. Carefully read the following safety
information before using the test tool.
Warning:
To avoid fire or electrical shock if an oscilloscope input is connected to
more than 42V peak (30Vrms) or on circuits of more than 4800VA, please
take note of below items:
Only use accessory insulated voltage probes or test lead.
Before using oscilloscope, please inspect oscilloscope accessories
such as probe to see if they are in good condition, if not, please
replace them.
Remove probes, test leads and other accessories that are not
necessary use.
Remove USB cable which connects oscilloscope and computer.
Please pay special attention when the probe is set as 1:1 and do
not apply input voltages above the rating of the instrument
because the probe tip voltage will directly transmit to the
oscilloscope.
Do not use exposed metal BNC or banana plug connectors.
Do not insert metal objects into connectors.
User Manual of Smart Digital Storage Oscilloscope
4
3. General Characteristics
Bandwidth: 60MHz — 300 MHz;
Sample rate(real time): 500MS/s — 3.2GS/s;
Dual channel, 10M points on each channel for the Record length;
Autoscale function;
7cm smart design body;
8 inch high definition TFT display (800 x 600 pixels);
Built-in FFT function;
Pass/Fail Function, optically isolated Pass/Fail output;
Waveform record and playback;
VGA output;
Various triggering function;
USB communication ports;
Super capacity lithium battery (Optional);
Built-in Chinese and English help system;
Multiple language user interfaces.
User Manual of Smart Digital Storage Oscilloscope
5
4. Junior User Guidebook
This chapter deals with the following topics mainly:
Introduction to the structure of the oscilloscope
Introduction to the user interface
How to implement the general inspection
How to implement the function inspection
How to make a probe compensation
How to set the probe attenuation coefficient
How to use the probe safely
How to implement an auto-calibration
Introduction to the vertical system
Introduction to the horizontal system
Introduction to the trigger system
User Manual of Smart Digital Storage Oscilloscope
6
Introduction to the Structure of the Oscilloscope
When you get a new-type oscilloscope, you should get acquainted with its front panel at
first and the SDS series digital storage oscilloscope is no exception. This chapter makes a
simple description of the operation and function of the front panel of the SDS series
oscilloscope, enabling you to be familiar with the use of the SDS series oscilloscope in the
shortest time.
Front panel
The SDS series oscilloscope offers a simple front panel with distinct functions to users for
their completing some basic operations, in which the knobs and function pushbuttons are
included. The knobs have the functions similar to other oscilloscopes. The 5 buttons (F1 ~
F5) in the column on the right side of the display screen or in the row under the display
screen (H1 ~ H5) are menu selection buttons, through which, you can set the different
options for the current menu. The other pushbuttons are function buttons, through which,
you can enter different function menus or obtain a specific function application directly.
Fig. 4-1 Front panel
1. Power on/off
2. Display area
3. Power indication light
Green light: Indicating DSO connects with AC Power, and the battery is in full (if
This manual suits for next models
3
Table of contents
Other Aktakom Test Equipment manuals
