Aitronic LogiScan-17 Series User manual
LogiScan-17xx
Operating Manual
Edition 22.11.2018
LogiScan-17xx
Operating Manual
Edition 22.11.2018
We don’t deliver just our Mobile Terminals with Standard
Software...
but also develop to customers specific
Applications for this Devices
PC Applications
Hardware
and advise you on
Creating concepts for mobile and stationary data collection
Queries surrounding Bar Code and RFID
Hardware problems
Please consult us with your queries or problems at:
aitronic GmbH
Balhorner Feld 10
D-33106 Paderborn
Germany
Telefon: +49 (0) 5251 29816-0
Telefax: +49 (0) 5251 29816-40
Internet: http://www.aitronic.de
___________________________________________________________
Copyright aitronic GmbH, 2018
All Rights reserved, in particular all extracts which correspond to the
translation, the reprint and reproduction by copying or similar methods.
Delivery and technical changes are subject to change.
Content__________________________________________________________________
Edition 22.11.2018 _____________________________________________________ aitronic
1
1. General.............................................................................. 2
2. Batteries............................................................................ 2
Precautions for using Batteries......................................................................2
Charging the Battery........................................................................................3
Deeply discharged Batteries...........................................................................4
3. Controls ............................................................................ 5
LogiScan-1700..................................................................................................5
LogiScan-1710..................................................................................................6
LogiScan-1720 UHF .........................................................................................7
4. Inserting SIM and Mini SD Cards.................................... 8
5. AppCenter......................................................................... 9
6. Barcode Scanning ........................................................... 9
7. Turning Device on/off ...................................................... 9
8. Pre-installed Android apps from aitronic..................... 10
9. Reset to Factory Default................................................ 10
10.Disposal.......................................................................... 11
11.Technical Specifications............................................... 12
LogiScan-1700................................................................................................12
LogiScan-1710................................................................................................13
LogiScan-1710 UHF .......................................................................................14
LogiScan-1720 UHF .......................................................................................15
RFID LF/HF Reader Modul.............................................................................17
LogiScan-17xx Operating Manual ___________________________________________
Edition 22.11.2018 _____________________________________________________ aitronic
2
1. General
This Android-based mobile computer has a powerful quad-core processor, stable
wireless connectivity (4G LTE, Wi-Fi, Bluetooth), a high-resolution camera,
accurate GPS, NFC, optional 2D barcode scanner and Iris Recognition. This robust
device can be used in industries such as express delivery, logistics, warehousing,
manufacturing.
The free apps devin and aiBrowser for barcode and RFID management with
Android apps and Android web applications, as well as the app ScannerDemo
(including source code) are already pre-installed and enabled on this device. These
apps have been developed specifically for android-based LogiScan-15xx/17xx and
can only be run on these devices.
2. Batteries
Precautions for using Batteries
Do not damage the batteries, heat, compress, open (eg with a drill) or soak in
water: danger of explosion! Make sure to store batteries out of the reach of
children or animals.
Do not use the product in explosion hazardous areas.
If the product gets wet, do not heat or heat (eg heating, microwave, etc.).
Heated battery can cause an explosion, deform or become unusable. On
contact with water and other liquids, the sticker changes color inside the
terminal. In this case, the warranty claim expires.
Do not use in an airplane or hospital.
Do not expose batteries to direct sunlight (eg car dashboard), because they are
deformed by heat and become unusable.
Do not let the battery unused for long periods in the device or in storage. If the
battery has not been used for 6 months or longer, check the charge status and
charge or dispose of the battery if necessary.
The typical estimated life of a lithium-ion battery is approximately 2 to 3 years,
or 300 to 500 charge cycles, whichever occurs first. A charge cycle is the useful
life of fully charged to fully discharged and fully recharged. For batteries with
which no full charge cycles are run through, the life expectancy is about 2 to 3
years.
Rechargeable lithium ion batteries have a limited lifespan, and gradually lose
their ability to hold a charge. This loss in capacity (aging) is irreversible. Since
the battery capacity decreases, so does the time from about the device can be
operated with a fully charged battery.
Lithium-ion batteries gradually, if they are not in use or during storage (self-
discharge). The battery charge status should be checked regularly. The
LogiScan-17xx Operating Manual ___________________________________________
Edition 22.11.2018 _____________________________________________________ aitronic
3
instructions contain information such as the state of charge to check and how
the batteries must be recharged.
Observe and register the term, which can be reached with a new, fully charged
battery with your device. Use the term of a new battery as a basis to compare
the runtimes with older batteries. The duration of the batteries varies depending
on the configuration of the device and applications that are running.
Batteries that have almost reached the end of their estimated life is to carefully
monitor.
Replace the battery with a new one of the following conditions applies:
The battery life is less than about 80% of the initial term.
The battery charge time increases significantly.
If a battery is stored for long periods of time or otherwise not used, please see
the instructions for the storage of batteries in this document. If you have not
followed the instructions and the battery has no charge, you look at it as
damaged and replace it with a new one.
Observe the loading instructions in the user manual of the product and / or the
detailed online help to recharge your batteries.
Charging or discharging the battery to approximately 50% of capacity before
storage.
Charge the battery to approximately 50% of capacity at least once every 6
months.
Remove the battery and store these separately from your device.
Store the battery at a temperature between 5 °C and 20 °C (41 °F and 68 °F).
Charging the Battery
Direct Charging: Connect AC adapter with charging cable or AC adapter with
USB cable to USB jack of the Snap-On.
Please notice: If the device should be charged via the AC
adapter, the USB cable has to be disconnected, otherwise the
charging will be done via the USB cable.
Cradle Charging: Connect AC adapter to the cradle and plug LogiScan-1700
into the cradle.
LogiScan-17xx Operating Manual ___________________________________________
Edition 22.11.2018 _____________________________________________________ aitronic
4
Deeply discharged Batteries
Symptoms: A device with a deeply discharged battery can no longer be
switched on. After the AC adapter has been plugged in or the device has been
put into the cradle, the flash symbol can flash for a short time. Until then the
red charge LED at the top left of the device can go up to 10 minutes.
Leave the device connected in the cradle or the AC adapter!
Observe the notes in "Charging the Battery".
Thus, a deep discharge of the battery can be avoided:
Charge the batteries regularly. For intensive use should be loaded daily.
Charge the battery as soon as possible after you receive the prompt from the
device.
If a device is not used for more than 2 days, turn it off as follows: Press and
hold the power button on the side of the device, and then press "Turn off" in
the menu that appears.
LogiScan-17xx Operating Manual ___________________________________________
Edition 22.11.2018 _____________________________________________________ aitronic
5
3. Controls
LogiScan-1700
LogiScan-17xx Operating Manual ___________________________________________
Edition 22.11.2018 _____________________________________________________ aitronic
6
LogiScan-1710
LogiScan-17xx Operating Manual ___________________________________________
Edition 22.11.2018 _____________________________________________________ aitronic
7
LogiScan-1720 UHF
This manual suits for next models
4
Table of contents
