A quick view at Aisoy1
Behaviour modes
Aisoy1 can be used in two modes:
‣Standalone: Aisoy1 makes its own decisions to act.
‣Programmed: Aisoy1 behaves depending on the current loaded program.
Language based interface
They don’t have touchscreens or keyboards.They mainly receive instructions from their language based
recognition system. Aisoy1’s ears are particularly sensitive to noise Even more than ours. That’s why they
may not understand you in noisy places or when many people speak simultaneously.
Please, refer to chapter Coloquo if you want to learn how to interact with it.
Power button
Turn Aisoy1 on: Press power on/off button to turn it on.You will briefly hear a sound and a white light
appears in the emotions heart during 20 seconds.Then, it starts flickering in blue and you can observe
the starting process on its mouth.This process will take between 1 and 3 minutes.This lets Aisoy1 to
review the status, recalibrate and readjust the system.Aisoy1 will be ready when it shows a smile and the
emotions heart appears in yellow.
Turn Aisoy1 off: Press and hold the power button for 3 seconds, until you hear the sound that indicates
the shutdown process has started. In case of an emergency power-off, press and hold the power button for
10 seconds, until it is turned off. Please, do not use this method unless it is necessary.
5
Touch button
Touch button is located at Aisoy1’s back and makes posible to carry out different control functions, depending
on the context. Here are some examples:
‣Aisoy1 in a standalone mode. Press and hold this button for 3 seconds to obtain the network name it is
connected and IP address.
‣Aisoy1 jugando una botapp. T Press and hold the button for 9 seconds to stop the execution of the
botapp.
Sleep
Aisoy1 are autonomous beings and are able to establish an action by themselves.Anyway, if they do not
detect any activity in a period of 10 minutes, they move to a semisleep phase and only the sensory system
remains active. While in this phase, you can reactivate it with a “hug” (holding its body with both hands for
10 seconds).
After 30 minutes, they fall into a deep sleep. If you want to reactivate it, you need to press and hold the touch
button for 10 seconds.
MicroSD Card
Aisoy1 includes a microSD card with Airos operating system. Please, do not remove the card because this may
damage your robot.To upgrade the robot, it is not necessary to remove it from the microSD slot. Therefore if
something occurs and you consider you should remove it, refer previously to the technical support.
Including accessories in Aisoy1
An AC/CD power adapter is included, to apply electrical power to Aisoy1 and recharge the battery.
