AirLive WL-5460AP v2 User manual

Wireless Access Point

WL-5460AP v2

lish

Polski

Deutsch

Česky

Русский

日本語

................

.................

..............

..................

.............

................

Slovensky

Português

Magyar

Español

Italy

...........

.........

...............

...................

Table of Contents

List of Languages

108

120

WL-5460AP v2 English

Declaration of Conformity

We, Manufacturer/Importer

OvisLink Corp.

5F., NO.6, Lane 130, Min-Chuan Rd., Hsin-Tien City, Taipei County, Taiwan

Declare that the product

Wireless AP

AirLive WL-5460AP v2

is in conformity with

In accordance with 89/336 EEC-EMC Directive and 1999/5 EC-R & TTE Directive

Clause Description

■EN 300 328 v1.6.1 (2004-11) Electromagnetic compatibility and Radio spectrum Matters (ERM); wideband transmission equipment operating in the

2.4GHz ISM ban and using spread spectrum modulation techniques; Part 1：technical Characteristics and test

ConditionsPart2：Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive

■EN 301 489-1 V1.4.1 (2002-08) Electromagnetic compatibility and Radio spectrum Matters (ERM); Electromagnetic compatibility(EMC) standard

■EN 301 489-17 V1.2.1 (2002-08) for radio equipment and services; Part 17：Specific conditions for wideband data and HIPERLAN equipment

■EN 55022:1998/A1:2000/A2:2003 Limits and methods of measurement of radio disturbance characteristics of information technology equipment

■EN 55024:1998/A1:2001/A2:2003 Information Technology equipment-Immunity characteristics-Limits And methods of measurement

■EN 50385 Product standard to demonstrate the Compliance of radio base stations and Fixed terminal stations for wireless

Telecommunication system with the Basic restrictions or the reference levels related to human exposure to radio

Frequency electromagnetic fields ( 110 Mhz – 40 GHz ) - General public

■EN 60950-1:2001/A11:2004 Safety for information technology equipment including electrical business equipment

■CEmarking

Manufacturer/Importer

Signature： ______________

Name ： Albert Yeh____

Position/ Title : Vice President

Date： 2005/8/17_____

English

2 WL-5460AP v2

English

Note on the FCC standard

This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part

15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interferences

when the equipment is operating in a commercial area. This equipment generates uses and may radiate radio

frequency energy, and if not installed in accordance with the user guide, may cause interference in the

transmission of radio communications. If operating in a residential area, it is probable this equipment will cause

harmful interference, in which case the user will be required to try to correct this interference using his own

means.

Note on CE Marking

This is a Class B product. In a residential area this product may cause radio interference, in which case the user

can be required to take the appropriate measures. OvisLink Corp. hereby declares that AirLive WL-5460AP v2

meets the basic requisites of directive 99/05/CE, and is therefore liable for the accuracy of these data:

OvisLink Corp.

5F, No.6 Lane 130,

Min-Chuan Rd, Hsin-Tien City,

Taipei, Taiwan

TEL: +886-2-2218-6888

Warranties

This product has undergone various quality controls to ensure proper operation.

This product is covered by a two-year warranty for countries inside European Union. For other countries, the

warranty period is one year only. In the event of any manufacturing fault or breakdown, it will be repaired by

OvisLink Corp. Please contact your supplier for details on the procedure to follow. This warranty shall not be

applicable in the event of damage caused by improper use of the product, accidents, faulty handling or

manipulation nor any future incompatibility with third party products.

English

WL-5460AP v2 English

Important Information



The AP features 5 LAN ports and one of LAN port behave as a WAN port when setup the Gateway mode to

use.



TX output power is limited to 20dBm (EU) 23dBm (FCC) , up to 25dBm (South America)



The AP mode’s default IP address is 192.168.100.252



The default Subnet Mask is 255.255.255.0



The default SSID is airlive



The default Channel is 11



The default login username is admin and no needed to enter the password, you can change the password

in the Web configuration page



In AP, Client, Bridge, and Repeater mode, the default DHCP Server is disabled. Please set your PC's IP

address to the same subnet as the AP to access the AP.



In WISP mode and WISP+Universal mode, the DHCP server is enabled. Please restart your PC to renew

the IP address.



Support of 8 modes of wireless functions :

AP, Client, Bridge, WDS Repeater, Universal Repeater, WISP (Client Router),WISP + Universal

Repeater and Gateway (AP Router) mode

Note: If you setup the wireless mode and push the setup button, but can’t pop-up window, please disable

the pop-up block function of the Yahoo or Google toolbar to allow pop-up window on your browser.



GPL Compliance: Part of the device's firmware use GPL licensed code. There is no warranty for the GPL

software. You can get a copy of the GPL source code from our website at http://www.airlive.com/gpl.htm.

English

4 WL-5460AP v2

English

Front Panel

LED Indicators

LED

Indicator Color Status

Solid Flashing

Power Green Turns solid yellow when device is booting,

after boot successfully, the light turns Green.

WAN Green Turns solid yellow when connect with 10Mbps

/ Green with 100Mbps speed Ethernet client.

Receiving/

Sending data

Wireless Green Turns solid green after booting is successful Receiving/

Sending data

LAN 1~LAN4 Green Turns solid yellow when connect with 10Mbps

/ Green with 100Mbps speed Ethernet client.

Receiving/

Sending data

English

WL-5460AP v2 English

Installation Steps

1. Please install your network cards first before the AP device

2. Screw-in the antenna (clockwise) into the Antenna connector

3. Connect the power and LAN cable to the back

4. Use your wireless card to do a site survey, the default SSID is airlive and Channel is 13

5. If you need to change AP’s configuration, please follow the procedure below:

The AP’s default IP address is 192.168.100.252. Please make sure your computer IP is in the same

subnet as the AP (i.e. 192.168.100.x)

Open the web browser and enter http://192.168.100.252/.

Wireless Mode Setup

This page includes all primary and major parameters for the wireless mode setting. Any parameter change will

cause the device to reboot for the new setting to take effect.

Wireless Modes: AP, Client, Bridge, WDS Repeater, Universal Repeater,WISP (Client Router),

WISP + Universal Repeater and Gateway (AP Router) mode

The default mode is set to AP. You can change it to another mode.

Network Type: When in Client mode, you can select between Ad-Hoc or Infrastructure.

English

6 WL-5460AP v2

English

Client / Bridge Mode Setup

Client Mode

English

Device B:

WISP Outdoor AP

Network Type: Infrastructure

Device A:

Mode: Client mode

Please make sure both A and B are set to the same ESSID and channel.

WL-5460AP v2 English

Bridge Mode Device B:

Mode: Bridge mode

MAC Address:

Device A’s AP MAC Address

Device A:

Mode: Bridge mode

MAC Address:

Device B’s AP MAC Address

Please make sure both A and B are set to the same channel.

WDS Repeater Mode Setup

WDS Repeater Mode

English

Device A:

Mode: WDS Repeater

MAC Address:

Device B’s AP MAC Address

Device B:

WDS Wireless AP/ Router

MAC Address:

Device A’s AP MAC Address

8 WL-5460AP v2

English

1. Please make sure both A and B are set to the same

channel number.

2. Add other’s AP MAC Address(BSSID) that the

repeater want to connect.

(Please make sure remote wireless AP/Router

ort WDS function

)

3. Setup wireless security function:

Wireless Client:

WDS Repeater ÆSecurity

WDS Security:

WDS Repeater ÆWDS Security

WDS Repeater and Wireless Client

use different authentication and

encryption for wireless connection.

For detail, Please refer to the user’s

manual.

English

Table of contents

Languages:

Other AirLive Wireless Access Point manuals

AirLive

AirLive AC-1200R User manual

AirLive

AirLive AIRMAX5 User manual

AirLive

AirLive N.TOP User manual

AirLive

AirLive WLA-5000AP User manual

AirLive

AirLive WT-2000AP User manual

AirLive

AirLive WH-9200AP User manual

AirLive

AirLive WH-9200AP User manual

AirLive

AirLive WL-5450AP User manual

AirLive

AirLive WLA-500AP User manual

AirLive

AirLive WL-5460AP User manual

AirLive

AirLive WL-5460AP v2 User manual

AirLive

AirLive WLA-5200AP User manual

AirLive

AirLive WL-5450AP User manual

AirLive

AirLive WH-5420CPE User manual

AirLive

AirLive AirLive WMU-6500FS User manual

AirLive

AirLive WL-5480PAP User manual

AirLive

AirLive AP60 User manual

AirLive

AirLive AirMax5N/ESD User manual

AirLive

AirLive TOP-12AC Installation and operation manual

AirLive

AirLive G.DUO User manual

AirLive

AirLive WHA-5500CPE User manual

AirLive

AirLive WL-5460APv2 Installation guide

AirLive

AirLive N.MINI User manual

AirLive

AirLive AirMax5X II User manual

Popular Wireless Access Point manuals by other brands

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Quick installation guide

Ubiquiti

Ubiquiti NanoStation NSM2 quick start guide

Cisco

Cisco Aironet 1550 Series Getting started guide

Aruba

Aruba IAP-335 user guide

Advantek Networks

Advantek Networks AWN-AP-54MR user manual

IP-COM

IP-COM AP355 user guide

Buffalo

Buffalo AirStation WLA-L11G user manual

EnGenius

EnGenius EnStationACv2 user manual

D-Link

D-Link DAP-3662 Quick installation guide

xG Technology

xG Technology xMax CN1300 installation guide

Widelink

Widelink ezWave WAP-1100 Series user guide

Edimax

Edimax CAP1200 user manual

Ubiquiti

Ubiquiti LBE-5AC-Gen2 quick start guide

Aruba

Aruba AP-203R installation guide

LuXout Shades

LuXout Shades LUXSHADE MOTION manual

CreatComm

CreatComm TB5F user manual

SineDigital

SineDigital MW-1500AP(H) installation guide

TP-Link

TP-Link AP9650 V1 Quick installation guide