Agrisem DS610 User manual

USER MANUAL

AGRISEM INTERNATIONAL - 535 Rue Pierre Levasseur CS 60263 –44158 ANCENIS CEDEX

Tél : 02 51 14 14 40 –Fax : 02 40 96 32 36

NOTT-E-601-C 21.11.14

MECHANICAL SEEDERS

DS610

DS1100

DS1400

Return the warranty certificate within

15 days together with a copy of the

invoice (without these elements the

warranty procedure cannot be

implemented).

PREAMBULE

This manual is provided with your machine to enable you to make best use of your equipment, in

particular under safe working conditions.

All owners are reminded that the manual is an essential accessory which must remain with the

machine at all times, and that in the event of resale, article 1615 of the Civil Code requires that as

such it must be handed over to the new owner.

You are also reminded that as the manual is essential to the machine, all owners must undertake to

leave it physically available with the machine for all users to consult.

AGRISEM INTERNATIONAL - 535 Rue Pierre Levasseur CS 60263 –44158 ANCENIS CEDEX –Tél : 02 51 14 14 40 –

Fax : 02 40 96 32 36

DECLARATION OF COMPLIANCE

WITH THE “MACHINES” DIRECTIVE

The manufacturer referred to above certifies that the new equipment described below:

MECHANICAL SEEDERS

Complies with the measures of the modified "Machines" directive (directive 98/37/CE) and with the

applicable national legislation.

Ligné,

30th March 2010

Michal GUZOWSKI

Chief Executive Officer

CONTENTS

1. INTRODUCTION................................................................................................................................... 10

2. WARRANTY CONDITIONS................................................................................................................ 11

2.1. EXCLUSIVE RESPONSIBILITY CLAUSE........................................................................................ 14

2.2. COMPLIANT USEOF THE MACHINE ............................................................................................. 15

2.3. SAFETY INSTRUCTIONS.................................................................................................................. 16

2.3.1. Safety instructions......................................................................................................................... 16

2.3.1.1. Introduction............................................................................................................................................... 16

2.3.1.2. Instructions to respect before using the machine....................................................................................... 17

2.3.1.3. Instructions to be respected for hitching and unhitching ........................................................................... 18

2.3.1.4. Instructions to respect before using the machine....................................................................................... 19

2.3.1.5. Instructions to respect before carrying out any operations on the machine ............................................... 21

2.3.1.6. Instructions regarding installation ............................................................................................................. 22

2.3.1.7. Instructions regarding the hydraulic system .............................................................................................. 23

2.3.1.8. Instructions relating to the braking system. ............................................................................................... 23

2.3.1.9. Instructions specific to AGRISEM seeders ............................................................................................... 24

2.3.1.10. Instructions relating to safety systems with spring security....................................................................... 25

2.3.1.11. Instructions relating to transmission shafts with universal joints............................................................... 25

2.3.1.12. Instructions relating to loading and transport ............................................................................................ 25

2.3.2. Safety symbols on the machine...................................................................................................... 26

3. TECHNICAL INSTRUCTIONS........................................................................................................... 27

3.1. ADJUSTMENTS /USING THE MECHANICAL DISC-O-SEM ........................................................ 27

3.1.1. Hitching / unhitching..................................................................................................................... 27

3.1.1.1. Tractor-mounted machine.......................................................................................................................... 28

3.1.1.2. Trailed machine......................................................................................................................................... 28

3.1.2. Adjustments / Use.......................................................................................................................... 29

3.1.2.1. Adjusting working depth using the roller .................................................................................................. 29

3.1.2.2. Disc-O-Sem settings for firm ground ........................................................................................................ 30

3.1.2.3. Disc-O-Sem settings for soft ground ......................................................................................................... 30

3.1.2.4. The batchers .............................................................................................................................................. 31

3.1.2.5. Adjusting the position of the tongues on the moveable base ..................................................................... 32

3.1.2.6. Batcher calibration..................................................................................................................................... 32

3.1.2.7. Flow rate test procedure ............................................................................................................................ 33

3.1.2.8. Flow rate test ............................................................................................................................................. 34

3.1.3. Metering table for the DS610 and DS1100................................................................................... 34

3.1.3.1. Seed metering table (kg/ha)....................................................................................................................... 35

3.1.4. Seed metering table for the DS1400.............................................................................................. 36

3.1.4.1. Seed metering table (kg/ha)....................................................................................................................... 36

3.1.5. Check during sowing..................................................................................................................... 37

3.1.6. Operating advice........................................................................................................................... 37

3.2. SERVICING -MAINTENANCE ......................................................................................................... 38

3.2.1. Servicing frequency....................................................................................................................... 38

3.2.2. Storage.......................................................................................................................................... 39

3.2.3. Lubrication................................................................................................................................... 39

3.2.4. Lubrication.................................................................................................................................... 40

3.2.5. Maintenance.................................................................................................................................. 41

3.2.6. Disks...............................................................................................................................................43

3.2.7. Lighting system ......................................................................................................................... ...44

4. WARRANTLY CLARM FORM …………………………………………………………………………..45

1. INTRODUCTION

Warranty certificate MUST be returned within 15 days of delivery of the

machine to the final user.

You have just acquired your AGRISEM machine. It has been designed to give complete satisfaction.

The equipment has been carefully designed using new solutions to reduce usage costs.

However, to get the best and most profitable use from your AGRISEM machine, please read this

manual carefully before starting it and follow the instructions strictly. In particular, follow the

instructions for adjusting and servicing the machine and the safety measures very carefully.

For any information or advice: please contact our dealer.

This user manual must be read and complied with by any persons who will be using it or maintaining

it, in particular:

-Usage (including preparation, repairs required during periods of work and maintenance).

-Maintenance (servicing and inspection).

-Transport.

AGRISEM INTERNATIONAL cannot be held liable for personal injury or damage to equipment and

malfunctions resulting from failure to comply with the instructions given by the manufacturer in this

manual.

This user manual is an integral part of the machine and must always be kept with the machine,

especially in case of resale.

AGRISEM INTERNATIONAL is constantly seeking to improve its products and reserves the right to

modify or improve its production without being under any obligation to apply these modifications or

improvements to products already on the market.

The instructions in this manual are not exhaustive and cannot cover all eventualities. The user must

comply with the applicable legislation, in particular with regard to safety, ensure that the rules for

safety and caution dictated by the situation are applied, use common sense and adapt the use of the

machine to the circumstances.

It is the Purchaser’s responsibility to check that the AGRISEM machine complies with the legislation

and regulations applicable to its final destination.

This manual suits for next models

Table of contents

Other Agrisem Seeder manuals

Agrisem

Agrisem BOSS Series User manual

Popular Seeder manuals by other brands

Sola

Sola A-6000/NS PLUS manual

Bourgault

Bourgault 7000 Series Start-Up Checklist

Land Pride

Land Pride All Purpose Seeder APS1548 Operator's manual

Meridian

Meridian 112BST Operator's manual

Botanicare

Botanicare POWER CLONER 180 instructions

Toro

Toro 33512 Operator's manual

HE-VA

HE-VA Terra-seeder Series operating instructions

Meridian

Meridian 220BST Operator's manual

Toro

Toro 23508 Operator's manual

ARBOS

ARBOS Unica Super Use and maintenance handbook

SPYKER

SPYKER S120-4510 Operator's manual

Maschio

Maschio Gaspardo SP Series Use and maintenance

Tar River

Tar River DRL-048 Operator's manual

Classen

Classen HTS-20HD Operator's manual

Landoll

Landoll Brillion SSB Operator's manual

Sulky

Sulky Kronos Original instructions

John Shearer

John Shearer Pasture Renovation Drill Operator's manual

Land Pride

Land Pride MPS2607 Operator's manual