Agilent Technologies 54831A User manual

HP/Agilent/Keysight 54830D Manual

Get Pricing & Availability at

ApexWaves.com

Call Today: 1-800-915-6216

Email: sales@apexwaves.com

https://www.apexwaves.com/oscilloscopes/keysight-technologies/54830-series/54830D

User’s Quick Start Guide

Publication number 54830-97005

August 2002

For Safety information and egulatory information, see the pages at the end of

this manual.

All ights eserved

54830A/31A/32A and

54830D/31D/32D

Infiniium Osci oscopes

In This Book

This book gives you the information you need to begin using the Infiniium

Oscilloscope. It contains four chapters:

Setting up the Oscilloscope Chapter 1 contains inspection, power

requirements, air flow, and setup information.

Working in Comfort Chapter 2 contains recommendations for working

comfortably and safely while operating the Infiniium Oscilloscope.

Using the Oscilloscope Chapter 3 gives an overview of the front panel and

the graphical user interface, and tells you how to perform basic operations with

the oscilloscope.

Using the Built-In Information System Chapter 4 describes the built-in

information system contents and navigation. The built-in information system

contains all of the information that is generally found in a User’s Guide.

CAUTION The Infiniium Osci oscope uses a specia y designed Windows 98 app ication

program. Whi e it is possib e to access some standard Windows 98 app ication

programs, it is not recommended. A Infiniium Osci oscope functiona ity is

direct y avai ab e from within the Infiniium Osci oscope app ication. Other

app ication software may or may not function correct y. Windows 98

configuration changes made outside of the Infiniium Osci oscope app ication

may not work correct y and cou d cause improper operation of the

osci oscope.

Contents

Contents-1

1 Setting Up the Oscilloscope

To inspect package contents 1-3

To inspect options and accessories 1-5

To connect power 1-7

To connect the mouse or other pointing device 1-11

To connect the keyboard 1-12

To connect to the LAN card 1-13

To connect oscilloscope probes 1-14

To connect the digital probe 1-17

Digital probe lead set 1-18

Probe tip isolation network and equivalent load 1-18

Direct connection through 40-pin connector 1-20

To connect a printer 1-22

To connect an external monitor 1-25

To connect an GPIB cable 1-26

To tilt the oscilloscope upward for easier viewing 1-27

To turn on the oscilloscope 1-28

To turn off the oscilloscope 1-29

To verify basic oscilloscope operation 1-30

To clean the oscilloscope 1-32

2 Working in Comfort

About epetitive Strain Injury 2-3

Mice and Other Input Devices 2-4

3 Using the Oscilloscope

Front Panel 3-4

Acquisition and General Controls 3-5

Horizontal Controls 3-5

Trigger Controls 3-5

Vertical Controls 3-5

Marker and Measurement Controls 3-6

To set the oscilloscope to a known starting condition 3-7

To start and stop waveform acquisition 3-8

To clear the waveform display 3-9

To turn an analog channel on or off 3-10

To turn digital channels on or off 3-11

Contents

Contents-2

To change input impedance and input coupling 3-12

To adjust the analog channel’s vertical scale and offset 3-13

To adjust digital channel’s vertical size and offset 3-14

To adjust sweep speed and horizontal position 3-15

To magnify a part of the waveform using delayed sweep 3-16

To set the oscilloscope to trigger on an edge 3-17

To use the markers 3-18

To use the quick measurements 3-19

To reinitialize the oscilloscope 3-20

Full-Screen Mode 3-21

Graphical Interface Mode 3-23

Measurement Toolbar 3-25

Tab Display Area 3-26

Waveform Display Area 3-26

Menu Control and Menus 3-27

Vertical Settings and Controls 3-27

Horizontal and Trigger Toolbar 3-28

To switch between the graphical interface and full-screen mode 3-30

To perform basic user interface operations 3-31

To select a command from the menu bar 3-33

To select a command from a context-sensitive menu 3-34

To change the mouse settings 3-36

To start and stop waveform acquisition 3-37

To clear the waveform display 3-38

To print the screen 3-39

To turn a channel on or off 3-40

To adjust the vertical offset 3-41

To adjust vertical scaling 3-43

To access the channel setup 3-44

To set the horizontal reference point 3-45

To adjust sweep speed 3-46

To adjust horizontal position 3-47

To access the horizontal setup 3-48

To zoom on a section of the waveform 3-49

To move the markers using the graphical interface 3-51

To make a measurement on a waveform 3-52

To access the trigger setup 3-54

To set an edge trigger 3-55

To set dialog box preferences 3-56

To install the printer software 3-59

To set up the network 3-67

To recover your Infiniium hard disk 3-68

Contents

Contents-3

4 Using the Built-In Information System

To access the information system 4-4

Access Methods 4-5

To navigate through the information system 4-10

For most topics: 4-10

For Setup Guide topics: 4-10

To access context-sensitive information 4-11

Contents-4

Setting Up the Osci oscope

1-2

Setting Up the Osci oscope

This chapter shows you how to set up your Infiniium oscilloscope,

connect power and accessories, and verify general operation.

Setting Up the Oscilloscope

To inspect package contents

1-3

To inspect package contents

❏Inspect the shipping container for damage.

Keep a damaged shipping container or cushioning material until you have

inspected the contents of the shipment for completeness and have checked the

oscilloscope mechanically and electrically.

❏Verify that you received the fo owing items in the Infiniium Osci oscope

packaging.

• Infiniium Oscilloscope (5483xB/D)

•Mouse

• (4) 1165A 10:1 10-MΩ passive probes (54831)

• (2) 1165A 10:1 10-MΩ passive probes (54830)

• Digital Probe (5483xD)

• Accessory Pouch

• Front Panel Cover

•Keyboard

• Power cord

•User’s Quick Start Guide—Includes CD-ROM with Progra er’s Guide,

Service Guide, and Probe anuals in Adobe® Acrobat for at.

See figure 1-1. (See table 1-2 for the power cord.) If anything is missing, contact

your nearest Agilent Technologies Sales Office. If the shipment was damaged,

contact the carrier, then contact the nearest Agilent Technologies Sales Office.

❏Inspect the osci oscope.

• If there is mechanical damage or a defect, or if the oscilloscope does not

operate properly or does not pass performance tests, notify your Agilent

Technologies Sales Office.

• If the shipping container is damaged, or the cushioning materials show signs

of stress, notify the carrier and your Agilent Technologies Sales Office. Keep

the shipping materials for the carrier’s inspection. The Agilent Technologies

Sales Office will arrange for repair or replacement at Agilent’s option without

waiting for claim settlement.

This manual suits for next models

Table of contents

Other Agilent Technologies Test Equipment manuals

Agilent Technologies

Agilent Technologies 85052C Manual

Agilent Technologies

Agilent Technologies Infinium DCA 86100A User manual

Agilent Technologies

Agilent Technologies Infiniium 8000A User manual

Agilent Technologies

Agilent Technologies 54835A User manual

Agilent Technologies

Agilent Technologies 85052D Manual

Agilent Technologies

Agilent Technologies InfiniiVision 4000 X-Series User manual

Agilent Technologies

Agilent Technologies 85052B Manual

Agilent Technologies

Agilent Technologies HP 83711A User manual

Agilent Technologies

Agilent Technologies E5091A User manual

Agilent Technologies

Agilent Technologies 90000 X Series User manual

Agilent Technologies

Agilent Technologies 54622A User manual

Agilent Technologies

Agilent Technologies U1602B User manual

Agilent Technologies

Agilent Technologies E8285A User manual

Agilent Technologies

Agilent Technologies 8960 Series 10 User manual

Agilent Technologies

Agilent Technologies InfiniiVision 7000A Series Manual

Agilent Technologies

Agilent Technologies 4072A Advanced User manual

Agilent Technologies

Agilent Technologies U4002A User manual

Agilent Technologies

Agilent Technologies N5230-60102 Installation and operation manual

Agilent Technologies

Agilent Technologies U1401A User manual

Agilent Technologies

Agilent Technologies U2701A User manual

Agilent Technologies

Agilent Technologies 54600 Series Manual

Agilent Technologies

Agilent Technologies DisplayPort Installation and operating manual

Agilent Technologies

Agilent Technologies U1602B Manual

Agilent Technologies

Agilent Technologies 2000 X-Series User manual

Popular Test Equipment manuals by other brands

SMART

SMART KANAAD SBT XTREME 3G Series user manual

Vernier

Vernier Go Direct Voltage manual

Lifeloc

Lifeloc R.A.D.A.R. quick start guide

Fluke

Fluke T5-600 Service information

Mercury

Mercury TSL01 user manual

MAHA

MAHA MBT Series Original operating instructions

Fuji Electric

Fuji Electric P-61 instruction manual

ETC

ETC SealerAtor user manual

Skyfine

Skyfine ETHYWAY V2 user manual

Appion

Appion G5 Twin Operation manual

PCB Piezotronics

PCB Piezotronics 8159-0112A Installation and operating manual

BW Technologies

BW Technologies MicroDock II user manual

Sun Nuclear

Sun Nuclear 1027 user guide

Biomark

Biomark HPR LITE READER user manual

Hioki

Hioki 3169-20 instruction manual

Ashcroft

Ashcroft ATE-100 operating manual

Rohde & Schwarz

Rohde & Schwarz RTA4000 user manual

Ritmix

Ritmix RAT-701 user manual