Agilent Technologies 35670A User manual

The Agilent 35670A at a Glance (Front Panel)

Agilent 35670A Front Panel

1-Use the softkeys to select items from the current menu. A softkey’s function is indicated by a video label on the analyzer’s screen.

Throughout this book, softkeys are printed like this: [FFT ANALYSIS].

Hardkeys are front-panel buttons whose functions are always the same. They have a label printed directly on the key itself.

Throughout this book, hardkeys are printed like this: [Inst Mode].

2-The analyzer’s screen is divided into the menu area and the display area. The menu area displays video labels for the softkeys. The

data area displays measurement data and information about the parameter settings.

3-The [Rtn] key returns the menu to the previous level.

4 -The POWER switch turns on the analyzer.

5 -Use the SYSTEM keys to control various system-level functions. These functions include saving files, plotting measurement data,

and accessing online help.

6 -Use the disk drive to save your work on 3.5 inch flexible disks.

7-The knob moves the markers and the cursor. It also steps through numeric values and scrolls through online help.

8 -Use the DISPLAY keys to control what appears on the analyzer’s traces. They only affect how data is displayed; DISPLAY keys

do not change measurement parameters. You can press keys in the DISPLAY menus without losing measurement parameters.

9 -Use the MARKER keys to select a variety of marker features.

10-Use the MEASUREMENT keys to control the analyzer’s source and inputs. They also control measurement parameters. You

must make a new measurement if you change a MEASUREMENT parameter.

11-Use the numeric-entry keys to enter a numeric value.

12-The microphone power connector provides power (8 Vdc) for the Microphone Adapter Kit (Option UK4).

13-The connector area of the front panel has two different configurations. The standard analyzer has a source output connector and

two input connectors. The 4-channel analyzer (Option AY6) has four input connectors.

Range indicators are located next to each input connector. The upper LED is the over-range indicator (the signal level exceeds the

current range setting). The lower LED is the half range indicator (the signal level exceeds half the current range setting).

14-A source on/off indicator is located at the left edge of the connector area.

The standard Agilent 35670A (2-channel) has a source connector on the front panel.

iii

The Agilent 35670A at a Glance (Rear Panel)

Agilent 35670A Rear Panel

1-The GPIB connector links the Agilent 35670A to other GPIB devices. GPIB parameters are set in the [Local/GPIB] and

[Plot/Print] menus.

2-The SERIAL PORT and the PARALLEL PORT link the analyzer to plotters and printers. These parameters are set in the

[Plot/Print] menu.

3-The SOURCE connector outputs the analyzer’s source signal. An LED on the front panel indicates if the source is on or off. The

source parameters are set in the [Source] menu.

The standard Agilent 35670A (2-channel) also has a source connector on the front panel.

4-The EXT TRIG connector links the analyzer to an external trigger signal. The external trigger parameters are set in the [Trigger]

menu.

5-The TACH connector links the analyzer to a tachometer. The tachometer parameters are set in the [Input] menu.

6-The KEYBOARD connector attaches an optional keyboard to the analyzer.

7-The DC POWER connector accepts DC power levels from 12 - 28 Vdc (nominal).

8-The AC POWER connector accept a wide range of ac voltage levels.

9-The POWER SELECT switch determines whether the analyzer is powered via the AC POWER connector or the DC POWER

connector.

10-The EXT MONITOR port links the analyzer to multi-sync monitors.

The following general safety precautions must be observed during all phases of

operation of this instrument. Failure to comply with these precautions or with

specific warnings elsewhere in this manual violates safety standards of design,

manufacture, and intended use of the instrument. Agilent Technologies, Inc.

assumes no liability for the customer’s failure to comply with these requirements.

GENERAL

This product is a Safety Class instrument (provided with a protective earth

terminal). The protective features of this product may be impaired if it is used in

a manner not specified in the operation instructions.

All Light Emitting Diodes (LEDs) used in this product are Class LEDs as per

IEC 60825- .

ENVIRONMENTAL CONDITIONS

This instrument is intended for indoor use in an installation category II,

pollution degree 2 environment. It is designed to operate at a maximum relative

specifications tables for the ac mains voltage requirements and ambient

operating temperature range.

BEFORE APPLYING POWER

Verify that the product is set to match the available line voltage, the correct fuse

is installed, and all safety precautions are taken. Note the instrument’s external

markings described under Safety Symbols.

GROUND THE INSTRUMENT

To minimize shock hazard, the instrument chassis and cover must be connected

to an electrical protective earth ground. The instrument must be connected to

the ac power mains through a grounded power cable, with the ground wire

firmly connected to an electrical ground (safety ground) at the power outlet.

Any interruption of the protective (grounding) conductor or disconnection of

the protective earth terminal will cause a potential shock hazard that could

result in personal injury.

Safety Summary

humidity of 95% and at altitudes of up to 4600 meters. Refer to the

FUSES

Only fuses with the required rated current, voltage, and specified type (normal

blow, time delay, etc.) should be used. Do not use repaired fuses or

short-circuited fuse holders. To do so could cause a shock or fire hazard.

DO NOT OPERATE IN AN EXPLOSIVE ATMOSPHERE

Do not operate the instrument in the presence of flammable gases or fumes.

DO NOT REMOVE THE INSTRUMENT COVER

Operating personnel must not remove instrument covers. Component

replacement and internal adjustments must be made only by qualified service

personnel.

Instruments that appear damaged or defective should be made inoperative and

secured against unintended operation until they can be repaired by qualified

service personnel.

WARNING The WARNING sign denotes h z rd. It c lls ttention to procedure,

pr ctice, or the like, which, if not correctly performed or dhered to,

could result in person l injury. Do not proceed beyond WARNING

sign until the indic ted conditions re fully understood nd met.

Caution The CAUTION sign denotes a hazard. It calls attention to an operating

procedure, or the like, which, if not correctly performed or adhered to, could

result in damage to or destruction of part or all of the product. Do not proceed

beyond a CAUTION sign until the indicated conditions are fully understood and

met.

S fety Symbols

Warning, risk of electric shock

Caution, refer to accompanying documents

Alternating current

Both direct and alternating current

Earth (ground) terminal

Protective earth (ground) terminal

Frame or chassis terminal

Terminal is at earth potential

Standby (supply) Units with this symbol are not completely disconnected from ac mains when

this switch is off

Regulatory Markings

The C-tick mark is a registered trademark of the Spectrum

Management Agency of Australia. This signifies compliance with

the Australian EMC Framework regulations under the terms of the

Radio Communications Act of 1992.

The CE mark is a registered trademark of the European

Community.

ICES/NMB-001 indicates that this ISM device complies with the

Canadian ICES-001.

Cet appareil ISM est confomre a la norme NMB-001 du Canada.

Contains one or more of the six hazardous substances above the

maximum concentration value (MCV), 40 Year EPUP.

The CSA mark is a registered trademark of the CSA-International.

This instrument complies with the WEEE Directive (2002/96/EC)

marketing requirement. The affixed product label indicates that you

must not discard this electrical/electronic product in domestic

household waste.

Other manuals for 35670A

Table of contents

Other Agilent Technologies Test Equipment manuals

Agilent Technologies

Agilent Technologies N9360A User manual

Agilent Technologies

Agilent Technologies E8285A User manual

Agilent Technologies

Agilent Technologies Medalist i3070 Series 5i User manual

Agilent Technologies

Agilent Technologies 8920B User manual

Agilent Technologies

Agilent Technologies Medalist x6000 User manual

Agilent Technologies

Agilent Technologies ENA Series User manual

Agilent Technologies

Agilent Technologies 5DX II Series User manual

Agilent Technologies

Agilent Technologies 7683 User manual

Agilent Technologies

Agilent Technologies N4010A Installation and operating instructions

Agilent Technologies

Agilent Technologies 1100 Series User manual

Agilent Technologies

Agilent Technologies Infiniium DCA Manual

Agilent Technologies

Agilent Technologies BERT Serial User manual

Agilent Technologies

Agilent Technologies 54835A User manual

Agilent Technologies

Agilent Technologies InfiniiVision MSO6104A Quick start guide

Agilent Technologies

Agilent Technologies 8960 User manual

Agilent Technologies

Agilent Technologies 85052B Manual

Agilent Technologies

Agilent Technologies Infiniium 90000 A User manual

Agilent Technologies

Agilent Technologies 54610B Manual

Agilent Technologies

Agilent Technologies E7490A User manual

Agilent Technologies

Agilent Technologies 8156A Operating instructions

Agilent Technologies

Agilent Technologies 8960 Series 10 User manual

Agilent Technologies

Agilent Technologies Infiniium User manual

Agilent Technologies

Agilent Technologies N3280A User manual

Agilent Technologies

Agilent Technologies 2000 X-Series User manual

Popular Test Equipment manuals by other brands

SMART

SMART KANAAD SBT XTREME 3G Series user manual

Vernier

Vernier Go Direct Voltage manual

Lifeloc

Lifeloc R.A.D.A.R. quick start guide

Fluke

Fluke T5-600 Service information

Mercury

Mercury TSL01 user manual

MAHA

MAHA MBT Series Original operating instructions

Fuji Electric

Fuji Electric P-61 instruction manual

ETC

ETC SealerAtor user manual

Skyfine

Skyfine ETHYWAY V2 user manual

Appion

Appion G5 Twin Operation manual

PCB Piezotronics

PCB Piezotronics 8159-0112A Installation and operating manual

BW Technologies

BW Technologies MicroDock II user manual

Sun Nuclear

Sun Nuclear 1027 user guide

Biomark

Biomark HPR LITE READER user manual

Hioki

Hioki 3169-20 instruction manual

Ashcroft

Ashcroft ATE-100 operating manual

Rohde & Schwarz

Rohde & Schwarz RTA4000 user manual

Ritmix

Ritmix RAT-701 user manual