Aewin Technologies CB-7960 User manual
User’s Manual
AEWIN Technologies Co., Ltd September, 2006
1
Networking Control Board
Model Number CB-7960
Intel®Pentium®4(D)/Celeron®(D) Networking Control Board
with six GbE LAN
User’s Manual
Version 1.0
User’s Manual
AEWIN Technologies Co., Ltd September, 2006
2
© Copyright 2006. All Rights Reserved
User’s Manual Edition 1.0, Sep 2006
This document contains proprietary information protected by copyright. All rights are reserved; no
part of this manual may be reproduced, copied, translated or transmitted in any form or by any means
without prior written permission of the manufacturer.
The content of this document is intended to be accurate and reliable; the original manufacturer assumes
no responsibility for any inaccuracies that may be contained in this manual. The original
manufacturer reserves the right to make improvements to the products described in this manual at any
time without prior notice.
Trademarks
IBM, EGA, VGA, XT/AT, OS/2 and PS/2 are registered trademarks of International business Machine
Corporation
Award is a trademark ofAward Software International, Inc
Intel is a trademark of Intel
RTL is a trademark of Realtek
VIA is a trademark of VIATechnologies, Inc
Microsoft, Windows, Windows NT and MS-DOS are either trademarks or registered trademarks of
Microsoft Corporation
All other product names mentioned herein are used for identification purpose only and may be
trademarks and/or registered trademarks of their respective companies
Limitation of Liability
While reasonable efforts have been made to ensure the accuracy of this document, the manufacturer
and distributor assume no liability resulting from errors or omissions in this document, or from the use
of the information contained herein.
For more information on CB-7960 or otherAEWIN products, please visit our website
http://www.aewin.com.tw.
For technical supports or free catalog, please send your inquiry to
User’s Manual
AEWIN Technologies Co., Ltd September, 2006
3
Table of Contents
Chapter 1. General Information ................................................................................5
1.1 Introducing.........................................................................................................5
1.2 Specification ......................................................................................................5
1.3 Order Information..............................................................................................6
1.4 Packaging...........................................................................................................6
1.5 Precautions.........................................................................................................7
1.6 Board Layout .....................................................................................................8
1.7 Board Dimension...............................................................................................8
Chapter 2. Connector/Jumper Configuration..........................................................9
2.1 Connector/Jumper Location and Definition.......................................................9
2.2 Connector and Jumper Setting.........................................................................11
2.3 CompactFlashTM Card Socket Pin Define........................................................17
Chapter 3 BIOS Setup..................................................................................................18
3.1 Quick Setup......................................................................................................18
3.2 Entering the CMOS Setup Program.................................................................19
3.3 Menu Options...................................................................................................20
3.4 Standard CMOS Features Setup ......................................................................21
3.5 Advanced BIOS Features Setup.......................................................................22
3.6 Advanced Chipset Features Setup....................................................................25
3.7 Integrated Peripherals ......................................................................................27
3.8 Power Management Setup ...............................................................................29
3.9 PNP/PCI Configuration ...................................................................................31
3.10 PC Health Status Configuration Setup...........................................................32
3.11 Frequency/Voltage Control ............................................................................33
3.12 Load Fail-Safe Defaults.................................................................................34
3.13 Load Optimized Defaults...............................................................................35
3.14 Supervisor/User Password.............................................................................36
3.15 Save and Exit Setup.......................................................................................37
3.16 Exit Without Saving.......................................................................................37
Chapter 4. Utility & Driver Installation....................................................................39
4.1 Operation System Supporting..........................................................................39
4.2 System Driver Installation ...............................................................................39
4.3 VGADriver Installation...................................................................................39
4.4 LAN Driver Installation...................................................................................41
4.5 SATA Driver Installation..................................................................................41
Appendix A: Programming the Watchdog Timer ........................................................43
User’s Manual
AEWIN Technologies Co., Ltd September, 2006
4
Appendix B: Optional Riser Card................................................................................45
Appendix C: Optional Cables......................................................................................46
User’s Manual
AEWIN Technologies Co., Ltd September, 2006
5
Chapter 1. General Information
1.1 Introducing
The CB-7960 is a scalable networking control board based on Intel Pentium-4
architecture with Intel 945G and ICH7R chipsets.
The CB-7960 is equipped with six GbE LAN ports, with bypass function in four
ports. With good cost and performance ratio, it is suitable for SMB/Enterprise
segments. It can match various applications, including Firewall, VPN, Load
Balancing, UTM, IPS, IDS, etc.
1.2 Specification
zCPU: LGA775 Intel Pentium 4(D)/Celeron (D) processor (533/800/1066MHz
FSB)
zBIOS: Award® 4Mb Flash BIOS
zChipset: Intel 945G + ICH7R
zI/O Chipset: Winbond® 83627HG
zMemory: Two 240pin DDR2 DIMM socket at 400/533/667MHz support up to
4GB
zSATA: Onboard two SATA connectors
zEnhanced IDE: One 40/44-pin IDE connector support up to two devices
zSerial port: Two RS-232 serial ports (one RJ45 connector, one pin header)
zParallel port: One pin header for parallel port
zUSB: Two USB2.0 ports (one connector, one pin header)
zKB/Mouse: Supports PS/2 keyboard and mouse
zExpansion slot: One Mini PCI socket and one PCI golden edge fingers
support two PCI slots
zEthernet: Six Intel® 82573L PCI-E×1 Ethernet controllers
zDigital I/O: Four digital input and four digital output
zSSD interface: One 50-pin CompactFlashTM TYPE I/II socket
zWatchdog timer: Can generate a system reset, support software selectable
timeout interval
zSystem Monitoring: Built in W83627HG; support temperatures, voltage
monitoring function
zPower supply: Standard ATX power supply
zMax. Power Requirements: 350W
zOperating temperature: 32 to 140℉（0 to 60℃）
zBoard size: 11.45”(L) x 10.6”(W) (291mm x 270mm)
User’s Manual
AEWIN Technologies Co., Ltd September, 2006
6
1.3 Order Information
We offer some accessories for CB-7960 control board for customer use.
Model Description
CB-7960A Intel® Pentium® 4(D) Celeron® (D) Networking Control Board with six GbE
LAN
AW-R049A Riser card with two PCI slots
MB-06018 VGA test card
46L-IUSB2B-00 USB CABLE W/BRACKET 2mm/ ROHS
46L-ICOM00-00 COM PORT CABLE 20CM/ ROHS
46L-IPS200-00 KB/MS CABLE 15CM/ RoHS
46L-ATA660-00 ATA-66 CABLE 46cm/ RoHS
46L-I00IDE-00 IDE CABLE (2mm) 45cm/ RoHS
46L-ILPT01-00 PRINTER CABLE (2mm) 26cm/ ROHS
46L-SATA00-00 S-ATA CABLE 50CM /RoHS
1.4 Packaging
Please make sure that the following items have been included in the package
before installation.
1. CB-7960 Control Board
2. Quick Installation Guide (Optional)
3. Cables (Optional)
4. CD-ROM that contains the following folders:
(1) Manual
(2) System Driver
(3) Ethernet Driver
(4) Utility Tools
If any item of above is missing or damaged, please contact your dealer or
retailer from whom you purchased the CB-7960. Keep the box and carton
when you probably ship or store CB-7960 in near future. After you unpack the
goods, inspect and make sure the packaging is intact. Do not plug the power
adapter to the main board of CB-7960 if you already find it appears damaged.
Note: Keep the CB-7960 in the original packaging until you start
installation.
User’s Manual
AEWIN Technologies Co., Ltd September, 2006
7
1.5 Precautions
Please make sure you properly ground yourself before handling the CB-7960
control board or other system components. Electrostatic discharge can be
easily damage the CB-7960 control board.
Do not remove the anti-static packing until you are ready to install the CB-7960
control board.
Ground yourself before removing any system component from it protective
anti-static packaging. To ground yourself, grasp the expansion slot covers or
other unpainted parts of the computer chassis.
Handle the CB-7960 control board by its edges and avoid touching the
components on it.
User’s Manual
AEWIN Technologies Co., Ltd September, 2006
8
1.6 Board Layout
1.7 Board Dimension
GbE Copper * 4
with bypass
GbE Copper * 2COM1USB
44pin IDE Connector
40pin IDE Connector
LPT
CF Card Socket
ATX Power
+12V DC IN
CPU
Fan
PCI Golden Edge
Finger
SATA Connectors
KB/MS
USB
COM2
DDR2 Socket * 2
Bypass
LEDs
System Fan
Power/HDD
LEDs
System
Fan
GPI
GPO
CPU
Socket
945G
ICH7R
Mini PCI Socket
GbE Copper * 4
with bypass
GbE Copper * 2COM1USB
44pin IDE Connector
40pin IDE Connector
LPT
CF Card Socket
ATX Power
+12V DC IN
CPU
Fan
PCI Golden Edge
Finger
SATA Connectors
KB/MS
USB
COM2
DDR2 Socket * 2
Bypass
LEDs
System Fan
Power/HDD
LEDs
System
Fan
GPI
GPO
CPU
Socket
945G
ICH7R
Mini PCI Socket
User’s Manual
AEWIN Technologies Co., Ltd September, 2006
9
Chapter 2. Connector/Jumper Configuration
2.1 Connector/Jumper Location and Definition
Connector Define Connector Define
CN1 FAN Connector CN31 Giga LAN RJ45 Connector
CN2 FAN Connector CN32 COM1 RJ45 Connector
CN3 FAN Connector CN33 USB0 Connector
CN4 KB/MS Pin Header CN34 PCI Golden Finger
CN6 GPIO Pin Header CN35 CTS#1 & RTS#1 Header
CN7 GPIO Pin Header CN36 DSR#1 & DTR#1 Header
CN9 SATA0 Connector Buzz1 Speak Buzzer
CN10 SATA1 Connector JP1 Clear CMOS
CN11 +12V Power Connector JP2 Slect CF Master or Slave
CN12 VGAPin Header JP3 Bypass Always Enabled Select
CN13 ATX Power Connector JP4 Bypass Always Enabled Select
CN15 Compact Flash Connector JP5 Watch Dog or Bypass Select
CN16 Front Panel Header
CN17 Mini PCI
CN18 Parallel Connector
CN19 IDE(2.54mm) 40 Pin
CN20 IDE(2mm) 44 Pin
CN21 LCM Backlight Connector
CN22 USB1 Pin Header
CN23 COM2 Box Header
CN24 FAN Connector
CN25 FAN Connector
CN26 Giga LAN RJ45 Connector
CN27 Giga LAN RJ45 Connector
CN28 Giga LAN RJ45 Connector
CN29 Giga LAN RJ45 Connector
CN30 Giga LAN RJ45 Connector
User’s Manual
AEWIN Technologies Co., Ltd September, 2006
10
Table of contents
Popular Control Unit manuals by other brands
Festo
Festo Compact Performance CP-FB6-E Brief description
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Quick installation guide
JS Automation
JS Automation MPC3034A user manual
JAUDT
JAUDT SW GII 6406 Series Translation of the original operating instructions
Spektrum
Spektrum Air Module System manual
BOC Edwards
BOC Edwards Q Series instruction manual
KHADAS
KHADAS BT Magic quick start
Etherma
Etherma eNEXHO-IL Assembly and operating instructions
PMFoundations
PMFoundations Attenuverter Assembly guide
GEA
GEA VARIVENT Operating instruction
Walther Systemtechnik
Walther Systemtechnik VMS-05 Assembly instructions
Altronix
Altronix LINQ8PD Installation and programming manual
