AES Corporation IntelliPro Fire 7794A User manual

Part No. 40-7794A Rev. 3 9/20/2018

AES 7794A IntelliPro Fire

Installation Manual

AES Corporation

285 Newbury Street

Peabody, MA 01960 USA

Tel (978) 535-7310 • Fax (978) 535-7313

www.aes-corp.com

2 AES 7794A IntelliPro Fire

Part No. 40-7794A Rev. 3 9/20/2018

This page is intentionally blank.

AES 7794A IntelliPro Fire 
 
 Part No. 40-7794A Rev. 3 9/20/2018 
Table of Contents 
Summary................................................................................................... 6 
1 Basic Functions ........................................................................................ 6 
2 User Interface .......................................................................................... 6 
3 System Knowledge Requirements........................................................... 6 
Fire Alarm Control Panel Telco Interface Requirements.................... 6 
4 Safety Considerations .............................................................................. 7 
5 Technical Specifications........................................................................... 7 
Installation of 7794A ................................................................................. 8 
1 Equipment List ......................................................................................... 8 
2 Installation ............................................................................................... 8 
Primary Communication Interface ............................................................10 
1 Connecting 7794A to Alarm Panel......................................................... 11 
2 Connection Details................................................................................. 11 
Supplemental Communication Interface ...................................................13 
1 Connecting the 7794A to Alarm Panel (U. S. Installation).................... 13 
2 Connection Details –7794A to Alarm Panel (U.S Installation).............. 14 
3 Connecting the 7794A to Alarm Panel (Canadian Installation)............. 16 
FACP with PSTN and RF..................................................................... 16 
4 Connection Details –7794A to Alarm Panel (Canadian Installation) ... 17 
FACP with PSTN and RF..................................................................... 17 
Configuring the 7794A ..............................................................................19 
1 Configuration Interface.......................................................................... 19 
Reset to Defaults............................................................................... 19 
Programming............................................................................................20 
1 Programming Options ─ UL NOTICE TO USERS...................................... 20 
2 Phone Line ............................................................................................. 21 
3 Intercept Number .................................................................................. 21 
4 Alarm Panel Report Format ................................................................... 21 
CID Alarm Format.............................................................................. 22 
Modem Alarm Format ...................................................................... 22 

AES 7794A IntelliPro Fire 
 
 Part No. 40-7794A Rev. 3 9/20/2018 
Pulse Alarm format ........................................................................... 23 
5 AP Input Gain......................................................................................... 23 
6 Intercept on Blind Dial ........................................................................... 24 
7 Line Cut Report ...................................................................................... 24 
8 POTS Cut Report Delay .......................................................................... 24 
9 POTS Restoral Delay............................................................................... 25 
10 AP Account Override.............................................................................. 25 
11 POTS Input Gain..................................................................................... 26 
12 Advanced Options Display ..................................................................... 26 
13 AP Output Gain ...................................................................................... 27 
14 Line Cut Sensing..................................................................................... 27 
15 CID 4xx Letter......................................................................................... 27 
16 M3 EC TEXT to CID Enabled ................................................................... 28 
17 Voltage Pump......................................................................................... 28 
18 Clock Frequency Shift ............................................................................ 29 
19 Status LED Blink Patterns....................................................................... 29 
Supported Formats/Protocols...................................................................29 
1 Format: Contact ID................................................................................ 29 
2 Format: Bosch/Radionics Modem II and Modem III............................. 30 
3 Format: Pulse ........................................................................................ 31 
4 Notes on Pulse Formats......................................................................... 32 
Number of Digits on Pulse Format.................................................... 32 
Double Round ................................................................................... 33 
Translation of 3+1 and 4+1 to 4+2.................................................... 33 
Expanded Format.............................................................................. 33 
5 Settings for Non-Supported Formats .................................................... 33 
Testing .....................................................................................................34 
1 Installation Checks................................................................................. 34 
Maintenance, Warranty and Repair ..........................................................34 
1 Troubleshooting..................................................................................... 34 
2 Contact Information .............................................................................. 35 
Revision History........................................................................................35 

5 AES 7794A IntelliPro Fire 
 
 Part No. 40-7794A Rev. 3 9/20/2018 
12. Warranty..................................................................................................36 
 
List of Tables 
Table 1. Configuration Options for AES 7794A............................................ 20 
Table 2. Blink Patterns ................................................................................. 29 
Table 3. Modem Format and Speed ............................................................ 30 
Table 4. Supported Bosch/Radionics Panels................................................ 31 
Table 5. Supported Pulse Formats ............................................................... 32 
Table 6. Recommend Fail Safe Settings ....................................................... 34 
 
List of Figures 
Figure 1. 7794A Connector and LED Locations............................................. 10 
Figure 2. Primary Communications Interface Using FACP Dialers ............... 11 
Figure 3. Primary and Secondary Communications Interface...................... 12 
Figure 4. 7794A-to-FACP Connections ......................................................... 12 
Figure 5. Connector and LED Locations........................................................ 13 
Figure 6. 7794A to Alarm Panel (U.S. Installation) ....................................... 14 
Figure 7. Alarm Panel Connections .............................................................. 15 
Figure 8. Canada/Dual Dialer Installation..................................................... 16 
Figure 9. Connecting to the Alarm Panel Using a Shared PSTN Line............ 17 
 

6 AES 7794A IntelliPro Fire

Part No. 40-7794A Rev. 3 9/20/2018

1. Summary

This document describes the installation procedure for the AES 7794A IntelliPro Fire

module used with the AES 7707 or 7177 Subscriber in commercial Fire Alarm Control

Panel (FACP) installations.

Installed between the FACP and AES 7707 or 7177 Subscriber, the 7794A intercepts

alarm panel messages and sends them to the monitoring station via the AES 7707 or

7177 Fire Subscriber Unit.

Important! The 7794A IntelliPro and Subscriber must be connected to the FACP

within the same room and in no more than 20 feet of conduit.

1.1 Basic Functions

The 7794A is a dialer capture module with monitoring capabilities, as well as full

emulation of the POTS telephone line for incoming data sent from the FACP. The

7794A can intercept the FACP phone line connection if the intercept number matches

the number being dialed.

1.2 User Interface

The 7794A does not use configuration jumper settings and is programmed using a web

browser interface through the AES Model 7707 or 7177 Fire Subscriber. Refer to the

7707 Installation Manual, AES P/N 40-7707 or 7177 Installation Manual, AES P/N

40-7177.

1.3 System Knowledge Requirements

This document assumes that the user knows how to set the AES subscriber unit

account number, cipher, and other configuration settings as well as how to operate the

AES MultiNet software environment including IPCtrl and automation.

Fire Alarm Control Panel Telco Interface Requirements

Note: The 7794A is not compatible with Fire Alarm Control Panels that test both

digital communicator telephone lines at the same time.

With the 7794A IntelliPro used as the sole path communicator, only one telephone line

connection to the FACP is required. Parallel connect both telephone lines together, if

line 2 cannot be disabled.

Note: The 7794A can provide voltage to both telephone line connections if they are

connected together in parallel with TIP to TIP and RING to RING as shown in Figure

2 on page 11 and Figure 4 on page 12.

7 AES 7794A IntelliPro Fire

Part No. 40-7794A Rev. 3 9/20/2018

1.4 Safety Considerations

As part of the 7794A installation, the following safety considerations should be kept in

mind:

Install all equipment in accordance with the National Electric Code, National

Fire Protection Association NFPA 70, NFPA 72, and local building codes.

Test this system periodically for proper operation. AES assumes no

responsibility for this equipment's failure to operate. AES's sole responsibility

is to repair or replace any AES device found to be defective during the

warranty period.

Avoid dropping or other physical impact which could damage the card or card

components.

1.5 Technical Specifications

SIZE: 4 7/8 in. x 5 in. (12.3 cm x 12.7 cm)

WEIGHT: 0.4 pound (0.18 kilogram)

POWER INPUT: Power supplied from AES Model 7707 or 7177

VOLTAGE: 12 VDC nominal

CURRENT: 350 mA nominal; 160 mA standby

FUSE: Onboard self-resetting. Not user serviceable

OPERATING TEMPERATURE RANGE: 0° to 49°C (32° to 120°F)

STORAGE TEMPERATURE RANGE: ‒10° to 60°C (14° to 140°F)

RELATIVE HUMIDITY RANGE: 0 to 93% RH, non-condensing

Important!

The 7794A IntelliPro and Subscriber must be connected to the FACP

within the same room and in no more than 20 feet of conduit.

Notes:

The 7794A must be installed in accordance with National Electrical Codes and

UL-864.

Canadian installations must be done in accordance with Canadian Electrical

Codes, CAN/ULC-S524 and CAN/ULC-S561.

8 AES 7794A IntelliPro Fire

Part No. 40-7794A Rev. 3 9/20/2018

2. Installation of 7794A

2.1 Equipment List

The 7794A IntelliPro includes the following items:

7794A IntelliPro

AES RJ11 cable 1 each AES P/N 13-0395

Hex standoffs hardware

Hex nuts w/lock washer 4 each

Insulating washers 2 each

2.2 Installation

1. Place hex standoffs on mainboard in four places shown in the photo below. Use the

longer hex standoffs (B) on the mainboard, and use the shorter hex standoffs (A)

on top of the zone input card. Do not overtighten the standoffs.

2. Place the 7794A on top of the installed standoffs.

3. Install insulating washers (P/N 09-7X94) over mounting holes H1 and H3.

9 AES 7794A IntelliPro Fire

Part No. 40-7794A Rev. 3 9/20/2018

4. Place hex nuts over the washer on the standoffs to secure the board in the four

places as shown below. Do not overtighten hex nuts.

For information on connecting the fire alarm control panel PSTN wiring, refer to

either the Primary Communication Interface section on page 10 or the

Supplemental Communication Interface section on page 13, depending on your

application.

Important!

The 7794A IntelliPro and Subscriber must be connected to the FACP within

the same room and in no more than 20 feet of conduit.

10 AES 7794A IntelliPro Fire

Part No. 40-7794A Rev. 3 9/20/2018

3. Primary Communication Interface

Figure 1 shows connector and diagnostic LED location on the 7794A.

Figure 1. 7794A Connector and LED Locations

Table of contents

Other AES Corporation Control Unit manuals

AES Corporation

AES Corporation 7762 User manual

Popular Control Unit manuals by other brands

Festo

Festo Compact Performance CP-FB6-E Brief description

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Quick installation guide

JS Automation

JS Automation MPC3034A user manual

JAUDT

JAUDT SW GII 6406 Series Translation of the original operating instructions

Spektrum

Spektrum Air Module System manual

BOC Edwards

BOC Edwards Q Series instruction manual

KHADAS

KHADAS BT Magic quick start

Etherma

Etherma eNEXHO-IL Assembly and operating instructions

PMFoundations

PMFoundations Attenuverter Assembly guide

GEA

GEA VARIVENT Operating instruction

Walther Systemtechnik

Walther Systemtechnik VMS-05 Assembly instructions

Altronix

Altronix LINQ8PD Installation and programming manual

Eaton

Eaton Powerware Series user guide

WAGO

WAGO 750-407/040-000 manual

Sony

Sony CCU-590 Operation manual

Graco

Graco 25D614 instructions

Task Force Tips

Task Force Tips YE-RF-900 Instructions for installation, safe operation and maintenance

Shini

Shini SPV-U Series manual