AEROMAT NH35 User manual
Thank you for purchasing this AEROMAT watch. The following
instructions are provided to help familiarize yourself with
the
proper operation and care of your AEROMAT watch. To
ensure correct use, please read and follow the instructions
carefully.
01
02
CONTENT
P3
P4
P5
P6
P7-8
P9-10
P11
P12
P13-14
AUTOMATIC
NH35 - Type B
9015 - Super Sonic
- Turning Inner Ring
8215 - Type A
QUARTZ
VK63 - Vol de Nuit
VK64 - PNY
763 - AEM450
515.24H - Type GMT
PRECAUTIONS AND PREVENTIVE MEASURES
03
AUTOMATIC - NH35
WIND UP THE MAINSPRING
SETTING THE DATE
SETTING THE TIME
Normal position1.
2.
3.
4.
positionCrown out to the
positionPush back to
Turn the crown to set hour and
minute hands
Normal position
1.
2.
3.
positionCrown out to the
4. positionPush back to
Turn the crown counter-clockwise
to set the date
Do not set the date between
9:00PM and 4:00AM as this
may cause a malfunction.
Normal position1.
2. Turn the crown clockwise to wind
up the mainspring
Wind by turning the crown clockwise
8 times. It will start to move naturally
after shaking slightly.
To wind up with winding machine.
Full wind up conditions:
Rotary speed: 30rpm
Operating time: 60rpm
04
AUTOMATIC - 9015
WIND UP THE MAINSPRING
SETTING THE DATE
SETTING THE TIME
Normal position1.
2. Turn the crown clockwise to wind
up the mainspring
Wind 15 ~20 times clockwise until
second hand starts to move naturally.
Normal position1.
2.
3.
positionCrown out to the
4. positionPush back to
Turn the crown counter-clockwise
to set the date
Do not set the date between
8:30PM and 2:00AM as this
may cause a malfunction.
Normal position1.
2.
3.
4.
positionCrown out to the
positionPush back to
Turn the crown to set hour and
minute hands
05
Turning Inner Ring
HOW TO TURN THE INNER RING
1. Turn the 2H crown clockwise or counter
clockwise to set the inner ring
06
AUTOMATIC - 8215
WIND UP THE MAINSPRING
SETTING THE DATE
SETTING THE TIME
Normal position1.
2. Turn the crown clockwise to wind
up the mainspring
Wind 15 ~20 times clockwise until
second hand starts to move naturally.
Normal position1.
2.
3.
positionCrown out to the
4. positionPush back to
Turn the crown counter-clockwise
to set the date
Normal position1.
2.
3.
4.
positionCrown out to the
positionPush back to
Turn the crown to set hour and
minute hands
07
QUARTZ - VK63
SETTING THE DATE
Normal position1.
2.
3.
positionCrown out to the
4. position
Do not set the date between 9:00PM
and 3:00AM; otherwise the date may
not change properly. If it is necessary
to set the date during that period,
rst change the time to any time
outside it, set the date, and then
reset the correct time.
Push back to
Turn the crown counter-clockwise to
set the date
Normal position1.
2.
3.
4.
positionCrown out to the
position
If the crown is pulled to the second position
while the chronograph has started, the
chronograph hands will continue to move.
This is not a malfunction.
Push back to
Turn the crown to set hour and
minute hands
(Check that AM / PM is set correctly)
SETTING THE TIME
08
QUARTZ - VK63
HOW TO USE CHRONOGRAPH
Press button to start the chronograph.
The chronograph hands will start moving.
1.
2.
3.
Press button again to stop the
chronograph. The chronograph hands stop
to indicate the elapsed time.
Press button to reset the chronograph.
All the chronograph hands will be reset
to "0" position.
The chronograph can measure up to 60 minutes
and chronograph stops after a measurement for
60 minutes.
Normal position1.
2.
3.
4.
positionCrown out to the
position
If the crown is operated within the 10 seconds,
the two-second interval movement will not be
activated.
Push back to
5. The small second hand will move at two-second
interval for 10 seconds as a demonstration
Press the button for two seconds and
release the button
RESET
09
QUARTZ - VK64
SETTING THE DATE
Normal position1.
2.
3.
positionCrown out to the
4. position
Do not set the date between 9:00PM
and 3:00AM, otherwise the date may
not change properly. If it is necessary
to set the date during that period,
rst change the time to any time
outside it, set the date, and then
reset the correct time.
Push back to
Turn the crown counter-clockwise to
set the date
SETTING THE TIME
Normal position1.
2.
3.
4.
positionCrown out to the
position
If the crown is pulled to the second
position while the chronograph has
started, the chronograph hands will
continue to move.
This is not a malfunction.
Push back to
Turn the crown to set hour and minute
hands
(Check that AM / PM is set correctly)
Other manuals for NH35
1
This manual suits for next models
6
Other AEROMAT Watch manuals
