www.AeroFLASH.de “See and Avoid” starts with being SEEN Rev 2 - FEB 2022
to us for service and updates: you can update the Nexus yourself using the
Mini-USB port and a configuration / update tool on your PC.
CanopyFlasher - canopy mounted, forward-facing flasher
CanopyFlasher is made from a
high strength, UV-resistant
ABS based polymer. The unit is
delivered as standard painted
in a high quality, matte “Space
Grey” (Nextel like) finish.
Optionally it can be delivered in
different colors.
The heart of the CanopyFlasher
is the array of 6 extremely
bright CREE LEDs emitting approximately 4000-4500 (red/white)
Lumens, with powerful, oval lenses; 2 beams orientated vertically, and 4
beams oriented horizontally. This makes the Flasher well visible at
distances of even up to 3500m, ±30 degrees above and below- and up to
±45 degrees left and right of the nose.
The CanopyFlasher system incorporated many safety features, like heat
sinks, a temperature sensor to prevent overheat conditions and two status
LEDs for indication of the operating modes.
Never look straight into the illuminated CREE LEDs as this will
certainly result in temporary blindness, with risk of permanent
damage to the eye sight! It is your responsibility to inform
anyone who is not familiar with this system.
FuselageFlasher - 360º external, top/bottom fuselage mounted flasher
The Nexus system features an additional flasher data port for connection to
our FuselageFlasher system. The FuselageFlasher is made out of a very
strong, super clear UV resistant epoxy and features 16 extremely bright
CREE LEDs, emitting approximately 7500-8500 (red/white) Lumens. It
can be installed on the top or bottom of the fuselage, flashing in a 360
degrees view. The FuselageFlasher is extremely sleek and aerodynamic,
measured at only 110mm long x 15mm wide x 11mm high. Only one small
hole of 4mm is required for the three power wires. Mounting of the flasher
