AerAtron Ceiling Extension User manual
IMPORTANT - Use this Ceiling Extension Instrucon in
combinaon with the Aeratron User Manual by Inserng
aer STEP 2 of the User Manual supplied with the Fan.
Ceiling Extension Instruction
Unpack your EXTENSION KIT and examine all parts, you should have the following:
EXTENSION CANOPY
DECORATION RING
CANOPY SCREW X2
EXTENSION COVER
EXTENSION ROD
EXTENSION BRACKET
BRACKET SCREW X2
SAFETY CLIP X2
PLEASE NOTE: A small colour variaon between the Fan and the retrofit Extension Parts is part
of standard manufacturing tolerances and consequently will need to be accepted by the user.
!
1
2
STEP 2 Fit Extension Bracket and Rod
STEP 1 Remove Suspension Ball
Fit Extension Bracket to
motor Sha.
Insert Bracket Screw
Tighten two Lock Screws
Remove Suspension
Ball Screw
Push Suspension Ball down Remove suspension Bolt
and Suspension Ball from
Motor Sha
Insert Safety Clips
into Bracket Screws
Fit Extension Rod to
Extension Bracket.
Insert Bracket Screw
Tighten two Lock Screws
B C
3
1
1 4
5
7
6
2
3
2
3
4
5
6
6
7
A
A
B
3
STEP 4 Fix Canopy Screw to Hanger Bracket
STEP 3 Assemble Extension parts to Extension Rod
Suspension Bolt
Suspension Ball
Suspension Ball screw
Extension Canopy
Canopy Screws
Decorang Ring
(holes facing canopy)
Extension Cover
~2mm
(5/64”)
Fix one Canopy Screw
to Hanger Bracket.
Leave a 2mm gap to
the Hanger Bracket
Insert the Suspension Bolt.
Raise the Suspension Ball to
cover the Suspension Bolt and
ghten the Suspension Ball Screw.
BA
4
STEP 6 Attach Canopy and Decoration Ring
STEP 5 Position the Motor Assembly in Hanger Bracket
!
=
Ensure that lug on Hanger Bracket
is engaged in slot in suspension Ball
Connect Mains Power Connector
to Fan Motor Extension plug.
1
Push Canopy up and rotate clockwise on
exisng Canopy Screw.
Insert second Canopy Screw & ghten both.
1
2
Line up large holes in Decoraon
ring with screw heads, push up and
rotate counter clockwise.
3
23
Note: Move / swivel the motor assembly sideways for easy canopy screw access.
Slide Remote Control Receiver
into Hanger Bracket in the orientaon
as shown above.
Allow the Mains cable free movement
between the Bracket and Receiver.
STEP 7 Install Receiver into Extension Bracket
IMPORTANT - Connue at STEP 5 (Connecng the Reciever) of the
User Manual supplied with the fan to complete the installaon.
!
Thank you. Your Aeratron team.
Ceiling Extension Edion 2021/06
For General Informaon & Warranty issues refer to the Aeratron™ User Manual available at www.aeratron.io
5
Other AerAtron Fan manuals
AerAtron
AerAtron E502 User manual
AerAtron
AerAtron AE2 User manual
AerAtron
AerAtron FR3 Series Installation and operating instructions
AerAtron
AerAtron AE2+ Series Installation and operating instructions
AerAtron
AerAtron AE+2 Series User manual
AerAtron
AerAtron FR3 Series Installation and operating instructions
Popular Fan manuals by other brands
ELTA FANS
ELTA FANS H03VV-F installation guide
Hunter
Hunter 20714 Owner's guide and installation manual
Emerson
Emerson CARRERA VERANDA CF542ORB00 owner's manual
Hunter
Hunter Caraway Owner's guide and installation manual
Panasonic
Panasonic FV-15NLFS1 Service manual
Kompernass
Kompernass KH 1150 operating instructions
