Advent ADV35 User manual

OPERATION

MANUAL

ADV35

10.2" OVERHEAD LCD

MONITOR WITH

DVD PLAYER

128-XXXX

Important Notice

An LCD panel and/or video monitor may be installed in a motor vehicle and visible to the driver if the LCD panel or video monitor is used

for vehicle information, system control, rear or side observation or navigation. If the LCD panel or video monitor is used for television

reception, video or DVD play, the LCD panel or video monitor must be installed so that these features will only function when the vehicle

is in “park” or when the vehicle’s parking brake is applied.

An LCD panel or video monitor used for television reception, video or DVD play that operates when the vehicle is in gear or when the

parking brake is not applied must be installed to the rear of the driver’s seat where it will not be visible, directly or indirectly, to the operator

of the motor vehicle.

Warnings

•Do not use any solvents or cleaning materials when cleaning the video monitor.

•Do not use any abrasive cleaners, they may scratch the screen.

•Use only a lightly dampened lint free cloth to wipe the screen if it is dirty.

•Lock the LCD screen in the fully closed position when not in use.

•Before putting on headphones always adjust the volume setting to the lowest position.

•Remember to leave the dome light switch in the off or auto positions when the vehicle is unattended, as the dome lights, if left on, can drain

the vehicle’s battery.

•Do not put pressure on the screen.

•Caution children to avoid touching or scratching the screen, as it may become dirty or damaged.

Television Reception

This entertainment system is designed primarily for viewing prerecorded movies or playing video games. Television reception in a moving

vehicle will be limited and in some areas will not be possible due to weak and variable signal strength. Television viewing in a stationary

vehicle will result in an improvement, but may still be marginal due to signal strength. The quality of the picture will not be consistent with

home TV reception. Reception may be affected by weather and distance from TV station. A weak signal may cause the picture to roll, be

snowy, or cause some color loss.

Licensed under one or more of the following patents,

Patent NOS. 5,775,762 and 5,927,784

•10.2" TFT (Thin Film Transistor) Active Matrix LCD

(Liquid Crystal Display) Monitor

• Built-in DVD Player

• OSD (On Screen Display) for Control of Picture Quality

and Functions

• Single Channel Infrared Transmitter for Optional IR

Wireless Headphones

• Four Audio / Video Source Inputs (DVD, AUX/Game,

AV1, TV*/AV2)

•Dome Lights with Built-in Three Way Switch

•Built-in Five Frequency Wireless FM Modulator

•Last Position Memory for DVD

•Headphone Jack

• Screen Mode Selection (16:9, 4:3)

• Wireless Game Controller

•Full Function Remote Control

•Backlit Controls

•Day / Night Picture Modes for Nighttime Use

• 1 AV Output Via RCA Pigtail

* Optional TV tuner (P/N PODTVT2)

FEATURES

Congratulations on your purchase of the Advent ADV35

DVD Player with Drop-Down Video / Monitor. The ADV35

has been designed to give you and your family many years

of video entertainment in the mobile environment. Please

read the directions that follow to familiarize yourself with

the product to ensure that you obtain the best results from

your equipment.

Please note: Installation options vary, see the individual

owner’s manuals for each component in your system to

obtain a full understanding of each component’s operation.

Safety Precaution

For safety reasons, when changing video media it is

recommended that the vehicle is not in motion, and that you

do not allow children to unfasten seat-belts to change video

media or make any adjustments to the system. System

adjustments can be accomplished using the remote control,

while seat-belts remain fastened. Enjoy your Advent

entertainment system but remember the safety of all

passengers remains the number one priority.

CONTROLS AND INDICATORS DIAGRAM (FRONT VIEW)

12345678

1. EJECT () Button

This Button is used for ejecting discs from the disc

compartment.

2. STOP (n) Button

This button is used to stop playback.

3. Source Select

Use to select one of the four sources: DVD, AV1, AUX / GAME,

AV2 / *TV (Optional).

4. Volume (+)

To increase the volume of wired headphone and level of

picture control.

5. Picture Select Button

Allows the user to adjust the picture adjustment mode.

6. Volume (–)

To decrease the volume of wired headphone and level of

picture control.

7. FMM Source Select Switch

Used to select the frequency in sequence rotation: FM OFF,

88.3MHz, 88.7MHz, 89.1MHz, 89.5MHz or 89.9MHz.

8. PLAY (u) Button

This button is used to start playback of a disc.

ON OFF AUTO

SFMM

–+

CONTROL FUNCTION DESCRIPTION (FRONT VIEW)

9. POWER ( ) Button

Used to turn the system on/off. Bright red when the system is

on, dim when off.

10. Dome Lights

Provide additional interior illumination.

11. Infrared Transmitter and Sensor

Use to transmit audio the wireless headphone. Also allows the

remote control to operate the ADV35 and to control other

accessories in the system.

12. Three Position Dome Light Switch

ON – Turns on the dome lights.

OFF – The dome lights will not turn on in this position.

AUTO – Automatically switches on the dome lights in

conjunction with the vehicle's interior illumination.

13. Ventilation Openings

14. Monitor Cut Off Switch

Used to turn off monitor when in the closed position.

15. LCD Panel

16. Screen Release

Press to release the screen.

Select Monitor M1 or M2 via local keys

1. Press and hold 3 seconds local key SOURCE and FMM

together at one time will unit from M1 to M2 or M2 to M1.

2. Factory setting at M1 during production.

3. Selected M1 or M2 with Last Memory.

Note:

• OSD will appear on screen 4~5 seconds before it disappear.

• Monitor mode (M1 or M2) only available when install 2 units

together.

FMM OFF

DVD

IRT OFF

FMM 88.3MHz

AUX/GAME

IRT ON

Side View

Back View

CONTROL FUNCTION DESCRIPTION (SIDE VIEW & BACK VIEW)

VIDEO L AUDIO R

1 2 3 4 5

1. DVD Disc insertion Slot

For loading and removing discs.

1. Headphone Jack

Allow the use of wired headphones with a 1/8" plug for

listening to the video program audio.

2. Auxiliary Video Input

3. Auxiliary Audio Left Input

4. Auxiliary Audio Right Input

5. PAUSE (;) Button

Allows the user to pause the playback. Pressing PAUSE

again or pressing the PLAY button will resume playback.

REMOTE CONTROL OPERATION

Battery Installation

Before attempting to operate your Remote Control, install the

batteries as described below.

1) Turn the Remote Control face down. Using a fingernail, lift the

battery cover off.

2) Install Two “AAA” batteries. Make sure that proper polarity

(+ or -) is observed.

3) Align the cover tabs with the remote control and press down

until the cover clicks.

The remote control will operate the ADV35. It is not a universal

remote control and will not control equipment from other

manufacturers.

MAIN FUNCTION DESCRIPTION

POWER

SOURCE

VOLUME

AUTO

MEMORY

SKIP/

ERASE/

WRITE

FMM

ON/OFF

RETURN DISPLAY

IRT

ON/OFF MUTE

CHANNEL

SELECT

DAY/

NIGHT PIX

MONITOR SELECT

DVD

REPEAT

SETUP

ZOOMAUDIO

SUBTITLE

A-B

EJECT

1. POWER Button*

Press this button to turn the ADV35 ON and OFF.

2. MONITOR SELECT

M1 Button – Change the remote control code to enable to control of M1.

M2 Button – Change the remote control code to enable to control of M2.

3. TV Mode Select Button**

Switches certain function keys on the remote control for TV functions.

4. DVD Mode Select Button

Switches certain function keys on the remote control for DVD functions.

5. SOURCE Button*

Each time the button is pressed, the audio /video source will change in sequence rotation: DVD > AUX or GAME > AV1 > AV2 or TV**.

6. AUTO MEMORY Button (AUTO PROGRAM Button)**

When the AUTO MEMORY button is pressed, all channels are searched and channels that are detected with signals of sufficient

levels are automatically stored.

7. SKIP / SEARCH Button**

This button selects between SKIP and SEARCH mode. In "SKIP mode" the TV tuner will tune and stop on channels that are

programmed into memory when the CHANNEL UP / DOWN buttons are used. When the SKIP mode is disable, the TV will stop on all

active channels.

8. ERASE / WRITE Button**

While tuned to a channel, pressing this button will store or erase the channel from memory.

* Function control is available on the unit and the remote control.

** The TV Option will only be displayed and the TV control functions are only available if the optional TV Tuner (P/N PODTVT2) is installed.

9. FMM ON / OFF Button*

Turns the FM Modulator power on or off.

10. CHANNEL SELECT Button*

Selects the FM Modulator Frequency (Frequency 1: 88.3MHz, Frequency 2: 88.7MHz, Frequency 3: 89.1MHz, Frequency 4: 89.5MHz,

Frequency 5: 89.9MHz)

Note: Individual FMM ON/OFF key on the Remote Control to select FMM ON and OFF while using the Remote Control to control the

FMM. While using local key the FMM OFF is selectable inside the frequency selection.

11. RETURN Button

Return to the Main Menu.

12. DISPLAY Button

Press to display the current disc information while the disc is playing. Press the cursor (pqtu) buttons to highlight the desired

option. For title and chapter selection use the number buttons to enter the desired title or chapter number for angle, audio, and subtitle.

Press the ENTER button repeatedly to change the item.

Title

Chapter

Angle

Audio

Subtitle

13. CURSOR / CHANNEL UP DOWN (pqtu) **

Use these buttons to access menu selections on the screen.

Use the CHpto increase the channel number and use CHqto decrease the channel number. **

14. OK Button (ENTER)

Used to implement a selected setting or menu option.

15. MENU Button

Allows the user to access the DVD (DVD MODE) disc menu and system menu (TV mode).

DVD

Title

Audio

Subtitle

-/- Chapter Angle 1/1

00:00:14

Ch ENG

Stop

5.1

Off

1/1

16. REPEAT Button

Allows the user to repeat a selected title, chapter, or track.

17. AUDIO Button

Press to display and select the AUDIO language in DVD mode. Each time you press the button, the language changes.

Note: The languages for audio vary from disc to disc.

18. SUBTITLE Button

Press to display and select the subtitle language in DVD mode. Each time you press the button, the subtitle language changes.

Note: The type and number of languages for subtitle vary from disc to disc.

19. STOP (<) Button*

Press to stop playback.

20. PREVIOUS (9) Button

Press to return to the previous chapter or track.

21. SCAN BACKWARD (7) Button

Press to search in a backward direction. Press repeatedly to change the search speed from 2, 4, 8, 20 times the normal speed.

22. PAUSE (II) Button*

Allows the user to pause the playback.

Pressing pause again or pressing the Play Button will resume playback.

23. PLAY Button*

Press to activate the play mode while a disc is loaded in the disc compartment.

24. SCAN FORWARD (8) Button

Press to search in a forward direction. Press repeatedly to change the search speed from 2, 4, 8, 20 times the normal speed.

Other manuals for ADV35

Table of contents

Advent ADV35 User manual

Popular Car Video System manuals by other brands