Advantech DVP-7410 User manual

DVP-7410

1 Channel MPEG 1/2/4

Digital Video Decoder

Card

This documentation and the software included with this product are

copyrighted 2004 by Advantech Co., Ltd. All rights are reserved. Advantech

Co., Ltd. reserves the right to make improvements in the products described

in this manual at any time without notice. No part of this manual may be

reproduced, copied, translated or transmitted in any form or by any means

without the prior written permission of Advantech Co., Ltd. Information

provided in this manual is intended to be accurate and reliable. However,

Advantech Co., Ltd. assumes no responsibility for its use, nor for any

infringements of the rights of third parties which may result from its use.

Acknowledgments

IBM and PC are trademarks of International Business Machines Corporation.

MS-DOS, Windows, Microsoft Visual C++ and Visual BASIC are

trade-marks of Microsoft Corporation. Intel and Pentium are trademarks of

Intel Corporation. Delphi and C++ Builder are trademarks of Inprise

Corporation.

CE notification

The DVP-7410, developed by ADVANTECH CO., LTD., has passed the CE

test for environmental specifications when shielded cables are used for

external wiring. We recommend the use of shielded cables. This kind of

cable is available from Advantech. Please contact your local supplier for

ordering information

On-line Technical Support

For technical support and service, please visit our support website at:

http://www.advantech.com/support

Part No. 20620000B0 1st Edition

Printed in Taiwan Jun. 2004

Rev. 0.1c

DVP-7410 User’s Manual

Contents

CHAPTER 1 GENERAL INFORMATION ...................................... 1

1.1 HARDWARE REQUIREMENTS.................................................... 2

1.2 SOFTWARE REQUIREMENTS ..................................................... 2

1.3 BLOCK DIAGRAM..................................................................... 3

Figure 1-1: Block Diagram............................................. 3

1.4 GPIO PIN DEFINITION ............................................................. 3

Table 1-1: GPIO Pin Definition ...................................... 3

1.5 DIMENSIONS ............................................................................ 4

Figure 1-2: Dimensions .................................................. 4

1.6 HARDWARE INSTALLATION ..................................................... 4

1.7 SOFTWARE / DRIVER INSTALLATION........................................ 5

CHAPTER 2 FUNCTIONS LIBRARY ............................................. 9

2.1 SUMMARY.............................................................................. 10

iii

General Information

CHAPTER

Chapter 1 General Information

The DVP-7410 is a single-chip audio/video decoder that supports SVCD,

VCD1.x, XCD 2.0, CD-DA, and CD-ROM media formats as well as the

ISMA (Internet Streaming Media Alliance) streaming format. Video

decoding support includes MPEG-1, MPEG-2, MP@ML, and MPEG-4

advanced simple profile (without GMC and QPEL). Audio decoding support

includes 16-bit MPEG-1 Layers1 and 2 (down mixed to stereo), and 16-bit

linear PCM DVD support includes hardware CSS decryption, 16:9 and 4:3

aspect ratios, Letterboxing, 3:2 pull-down, multiple angles, and sub-picture.

The programmable video output display controller includes higher-quality

arbitrary scaling and an OSD frame buffer with 16-level alpha blending.

Output resolutions up to 1920X1080, interlaced or progressive, are supported

with a refresh rate up to 120 Hz. Brightness, contrast, and color controls are

provided to optimize the displayed video.

1.1 HardwareRequirements

Intel Pentium III 800MHz or above (The CPU speed is depends on the video

frame rate and resolution)

256MB RAM or above

CD-ROM

Hard disk with 128MB free space

1.2 SoftwareRequirements

Microsoft Windows 98/ME/2000/XP with DirectX 8.1 or above

DVP-7410 User’s Manual

1.3 BlockDiagram

Figure 1-1: Block Diagram

1.4 GPIOPinDefinition

Table 1-1: GPIO Pin Definition

Pin no. Description

0 I2C

1 I2C

2 Mute

3 Video Switch

4 VGA Switch

5 Card ID 0

6 Card ID 1

7 Card ID 2

8 Card ID 3

9 Protect Pull High

10 Protect Pull Low

11 Release

12 Release

13 Release

14 Release

1.5 Dimensions

Figure 1-2: Dimensions

1.6 HardwareInstallation

Turn off your computer and unplug the power cord.

Remove the cover of your computer.

Touch the metal part on the surface of your computer to neutralize the static

electricity that might be on your body.

Place the DVP-7410 into chassis and using screws to fix it.

Connect appropriate accessories to the DVP-7410 decoder card.

Replace the cover of your computer chassis.

Plug in the power cord and turn on the computer.

Note: Keep the anti-static bag for future use. You might need the original

bag to store the card if you have to remove the card from the PC or

transport it elsewhere.

DVP-7410 User’s Manual

1.7 Software/DriverInstallation

Before you begin

To facilitate the installation of the enhanced display device drivers and utility

software, you should read the instructions in this chapter carefully before

you attempt installation. The device drivers for the DVP-7410 board are

located on the software installation CD. The auto-run function of the driver

CD will guide and link you to the utilities and device drivers under Windows

system. Before you begin, it is important to note that most display drivers

need to have the relevant software application already installed in the system

prior to installing the enhanced display drivers. In addition, many of the

installation procedures assume that you are familiar with both the relevant

software applications and operating system commands. Review the relevant

operating system commands and the pertinent sections of your application

software user’s manual before performing the installation.

Installing

1. Insert the driver CD into your system's CD-ROM drive. In a few seconds,

the software installation main menu appears. Move the mouse cursor over

the "Manual" button under the "SETUP" heading, a message pops up telling

you to start the installation.

2. Click "Next" when you see the following message.

3. Click "Install" when you see the following Ready to Install the Program

message.

DVP-7410 User’s Manual

Table of contents

Advantech DVP-7410 User manual

Popular Video Card manuals by other brands