Advantech ADAM-6521 Series User manual

ADAM-6521 Series

Industrial Switches with 4

10/100 Mbps Ethernet Ports

and 1 Fiber Port

User Manual

ADAM-6521 Series User Manual ii

The documentation and the software included with this product are copy-

righted 2006 by Advantech Co., Ltd. All rights are reserved. Advantech

Co., Ltd. reserves the right to make improvements in the products

described in this manual at any time without notice. No part of this man-

ual may be reproduced, copied, translated or transmitted in any form or

by any means without the prior written permission of Advantech Co., Ltd.

Information provided in this manual is intended to be accurate and reli-

able. However, Advantech Co., Ltd. assumes no responsibility for its use,

nor for any infringements of the rights of third parties, which may result

from its use.

Acknowledgements

Intel and Pentium are trademarks of Intel Corporation.

Microsoft Windows and MS-DOS are registered trademarks of

Microsoft Corp.

All other product names or trademarks are properties of their respective

owners.

This Manual Covers the Following Models

• ADAM-6521

• ADAM-6521S

• ADAM-6521/ST

Part No.2003652104 5th Edition

Printed in Taiwan March 2006

iii

Product Warranty (2 years)

Advantech warrants to you, the original purchaser, that each of its prod-

ucts will be free from defects in materials and workmanship for two years

from the date of purchase.

This warranty does not apply to any products which have been repaired or

altered by persons other than repair personnel authorized by Advantech,

or which have been subject to misuse, abuse, accident or improper instal-

lation. Advantech assumes no liability under the terms of this warranty as

a consequence of such events.

Because of Advantech’s high quality-control standards and rigorous test-

ing, most of our customers never need to use our repair service. If an

Advantech product is defective, it will be repaired or replaced at no

charge during the warranty period. For out-of-warranty repairs, you will

be billed according to the cost of replacement materials, service time and

freight. Please consult your dealer for more details.

If you think you have a defective product, follow these steps:

1. Collect all the information about the problem encountered. (For

example, CPU speed, Advantech products used, other hardware

and software used, etc.) Note anything abnormal and list any

onscreen messages you get when the problem occurs.

2. Call your dealer and describe the problem. Please have your man-

ual, product, and any helpful information readily available.

3. If your product is diagnosed as defective, obtain an RMA (return

merchandize authorization) number from your dealer. This allows

us to process your return more quickly.

4. Carefully pack the defective product, a fully-completed Repair and

Replacement Order Card and a photocopy proof of purchase date

(such as your sales receipt) in a shippable container. A product

returned without proof of the purchase date is not eligible for war-

ranty service.

5. Write the RMA number visibly on the outside of the package and

ship it prepaid to your dealer.

ADAM-6521 Series User Manual iv

This product has passed the CE test for environmental specifications

when shielded cables are used for external wiring. We recommend the

use of shielded cables. This kind of cable is available from Advantech.

Please contact your local supplier for ordering information.

FCC Class A

Note: This equipment has been tested and found to comply with the limits

for a Class A digital device, pursuant to part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial environ-

ment. This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instruction

manual, may cause harmful interference to radio communications. Opera-

tion of this equipment in a residential area is likely to cause harmful inter-

ference in which case the user will be required to correct the interference

at his own expense.

Technical Support and Assistance

Step 1. Visit the Advantech web site at www.advantech.com/support

where you can find the latest information about the product.

Step 2. Contact your distributor, sales representative, or Advantech's

customer service center for technical support if you need addi-

tional assistance. Please have the following information ready

before you call:

- Product name and serial number

- Description of your peripheral attachments

- Description of your software (operating system, version, appli-

cation software, etc.)

- A complete description of the problem

- The exact wording of any error messages

Document Feedback

To assist us in making improvements to this manual, we would welcome

comments and constructive criticism. Please send all such - in writing to:

[email protected]

Contents

Chapter 1 Overview .......................................................... 2

1.1 Introduction ....................................................................... 2

1.2 Features ............................................................................. 3

1.3 Specifications .................................................................... 4

1.4 Ordering Information ........................................................ 5

Chapter 2 Installation ....................................................... 8

2.1 LED Indicators .................................................................. 8

Table 2.1:LED Indicator Legend ................................... 8

2.2 Dimensions (units:mm) ................................................... 9

Figure 2.1:Bottom .......................................................... 9

Figure 2.2:Top ............................................................... 9

Figure 2.3:Front ............................................................. 9

2.3 Mounting the Module...................................................... 10

2.3.1 Choosing a Mounting Method ..................................... 10

Figure 2.4:Wall Mounting ........................................... 10

Figure 2.5:Attaching DIN Rail Bracket ....................... 11

Figure 2.6:Piggyback Stacking .................................... 11

2.4 Connections..................................................................... 12

2.4.1 Connection to the Devices ........................................... 12

2.4.2 Connection to Other Hubs or Switches ........................ 12

2.4.3 Connection to a Fiber Network .................................... 12

2.4.4 Power Connection ........................................................ 13

Figure 2.7:Power Wiring ............................................. 13

ADAM-6521 Series User Manual vi

CHAPTER

Overview

This chapter gives an overview of

ADAM-6521 modules.

Sections include:

• Introduction

• Features

• Specifications

• Ordering Information

ADAM-6521 Series User Manual 2

Chapter 1 Overview

1.1 Introduction

The ADAM-6521 series consists of industrial-grade 10/100 Mbps Ether-

net switches with fiber ports that make it possible to expand industrial

networks fast and cost-effectively. In addition to four 10/100 Mbps Ether-

net ports with RJ-45 connector, ADAM-6521 also provide one multi-

mode fiber optic port, while ADAM-6521S provides one single-mode

fiber optic port with a SC-type connector. Using fiber optics, you can pre-

vent noise from interfering with your system and support high-speed (100

Mbps) and long-distance (ADAM-6521: 2km; ADAM-6521/ST: 2km;

ADAM-6521S: 15km) transmissions.

ADAM-6521 modules can accept a input voltage range from +10 to 30

VDC to the terminal block. In addition, the operating temperature is from

-10 to 65° C. The above functions make the ADAM-6521 modules more

stable and reliable, so they are especially suitable for industrial environ-

ments that require Ethernet networking, such as: semiconductor factories,

warehouses, industrial conveyer systems and more.

High-Speed Transmission

ADAM-6521 modules have a switch controller that can automatically

sense transmission speeds (10/100 Mbps). The RJ-45 interface can also

be auto-detected, so MDI or MDI-X is automatically selected and a cross-

over cable is not required. All ports have memory buffers that support the

store-and-forward mechanism. This assures that data is properly transmit-

ted.

Flexible Mounting

Due to its versatility and innovative design, ADAM-6521 modules can be

fixed in three ways: DIN rail, panel and piggyback mounting.

Advanced Protection for Power line

The power line of ADAM-6521 modules supports up to 3000 VDC surge

protection (EFT), which secure equipment against unregulated voltage

and make systems safer and more reliable.

3 Chapter1

Easy Troubleshooting

There are 6 LED indicators supplied that aid troubleshooting for ADAM-

6521 modules. Each port has a pair of LEDs to indicate link status and

port activity. This makes it easy to monitor collisions, link status, power

failure and data reception for on-site diagnostics.

1.2 Features

• Provides 4 x 10/100 Mbps Ethernet ports with RJ-45 connector

• Provides 1 x 100 Mbps multi/single-mode fiber port with SC/ST

connector

• Supports full/half duplex flow control

• Supports MDI/MDI-X auto crossover

• Provides broadcast storm protection

• Embedded with a switch controller, supports auto-negotiation

• Embedded with the memory buffer, supports store-and-forward trans-

mission

• Supports +10 ~ 30 VDC voltage

• Provides surge protection (EFT) 3000 VDC for power line

• Supports ESD protection 4000 VDC for Ethernet Ports

• Provides flexible mountings: DIN rail, stack, panel mounting

• Supports operating temperature: -10 ~ 65° C

• 64 KB of SRAM on chip for frame buffering

• Integrated address Look-Up Engine, supports 1K absolute MAC

addresses

ADAM-6521 Series User Manual 4

1.3 Specifications

Communications

Standard IEEE 802.3, IEEE 802.3u, 802.3x

LAN 10/100Base-T, 100Base-FX

Transmission Distance Ethernet: 100 m

Fiber: ADAM-6521: 2 km

ADAM-6521/ST: 2km

ADAM-6521S: 15 km

Transmission Speed Ethernet: up to 100 Mbps

Fiber: 100 Mbps

Interface

Connectors 4 x RJ-45, 1 x SC type fiber connector

(ADAM-6521, ADAM-6521S) or 1 x ST

type fiber connector (ADAM-6521/ST)

LED Indicators Power, Link (100Base-FX),

100/10M (Ethernet)

Power

Power Connectors 2-pin removable screw terminal

Power Consumption ADAM-6521: Max. 3 W

ADAM-6521/ST: Max. 3 W

ADAM-6521S: Max. 4 W

Power Input Unregulated 10 ~ 30 VDC

Mechanism

Dimensions (W x H x D) 70 x 112 x 27 mm

Enclosure IP30, ABS+PC with solid mounting kits

Mounting DIN 35 rail, stack, wall

Protection

ESD Protection 4,000 VDC (Ethernet)

Surge Protection (EFT) 3000 VDC (Power)

This manual suits for next models

Table of contents

Other Advantech Switch manuals

Advantech

Advantech B+B SmartWorx SE400 Series User manual

Advantech

Advantech EKI-7526MI User manual

Advantech

Advantech EKI-2525M User manual

Advantech

Advantech EKI-9728G Series User manual

Advantech

Advantech EKI-9316P Series User manual

Advantech

Advantech EKI-2525I User manual

Advantech

Advantech EKI-2528 User manual

Advantech

Advantech EKI-7428G Series User manual

Advantech

Advantech EKI-3725 Installation and operation manual

Advantech

Advantech SNMP-1000-B1 User manual

Advantech

Advantech EKI-7720 Series User manual

Advantech

Advantech B+B SmartWorx MiniMc-Gigabit User manual

Advantech

Advantech BB-UH104 User manual

Advantech

Advantech CSW-8 User manual

Advantech

Advantech eWorx SE500 User manual

Advantech

Advantech EKI-7629C User manual

Advantech

Advantech EKI-6558TI User manual

Advantech

Advantech USB-4630 Installation and operation manual

Advantech

Advantech EKI-7659CPI User manual

Advantech

Advantech EKI-2725 User manual

Advantech

Advantech EKI-7710E-2C User manual

Advantech

Advantech EKI-7706 Series User manual

Advantech

Advantech EKI-6528TI User manual

Advantech

Advantech LEO-S595-WBG0 User manual

Popular Switch manuals by other brands

URC

URC Total Control MFS-8 installation manual

Azbil

Azbil HPQ-D11 user manual

Sony

Sony DFS-900M operating instructions

SICK

SICK i17S operating instructions

F&F

F&F SZR-277 quick start guide

Shure

Shure UAMS/BK user guide

Dräger

Dräger X-zone Switch Off Instructions for use

Asco

Asco Joucomatic 349 Series manual

BT Mini Hub user guide

D-Link

D-Link DES-1226G manual

Johnson Controls

Johnson Controls FS80-C installation instructions

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Configuration guide

MicroNet

MicroNet SP1200A user manual

Ruijie

Ruijie RG-PF2920 Series Hardware installation and reference guide

Altinex

Altinex DA1914SX user guide

MiLAN

MiLAN MIL-SM2401M user guide

RJM

RJM MASTERMIND PBC/6X user manual

Atlas

Atlas MMK-KVM8 owner's manual