Advantech ADAM-6520I-AE User manual

ADAM-6520

5-Port Industrial 10/100 Mbps

Ethernet Switch

User Manual

ADAM-6520 User Manual ii

The documentation and the software included with this product are copy-

righted 2005 by Advantech Co., Ltd. All rights are reserved. Advantech

Co., Ltd. reserves the right to make improvements in the products

described in this manual at any time without notice. No part of this man-

ual may be reproduced, copied, translated or transmitted in any form or

by any means without the prior written permission of Advantech Co., Ltd.

Information provided in this manual is intended to be accurate and reli-

able. However, Advantech Co., Ltd. assumes no responsibility for its use,

nor for any infringements of the rights of third parties, which may result

from its use.

Acknowledgements

Intel and Pentium are trademarks of Intel Corporation.

Microsoft Windows and MS-DOS are registered trademarks of

Microsoft Corp.

All other product names or trademarks are properties of their respective

owners.

This Manual Covers the Following Models

• ADAM-6520

• ADAM-6520I

• ADAM-6520L

Part No. 2003652013 5th Edition

Printed in Taiwan May 2006

iii

Product Warranty (2 years)

Advantech warrants to you, the original purchaser, that each of its prod-

ucts will be free from defects in materials and workmanship for two years

from the date of purchase.

This warranty does not apply to any products which have been repaired or

altered by persons other than repair personnel authorized by Advantech,

or which have been subject to misuse, abuse, accident or improper instal-

lation. Advantech assumes no liability under the terms of this warranty as

a consequence of such events.

Because of Advantech’s high quality-control standards and rigorous test-

ing, most of our customers never need to use our repair service. If an

Advantech product is defective, it will be repaired or replaced at no

charge during the warranty period. For out-of-warranty repairs, you will

be billed according to the cost of replacement materials, service time and

freight. Please consult your dealer for more details.

If you think you have a defective product, follow these steps:

1. Collect all the information about the problem encountered. (For

example, CPU speed, Advantech products used, other hardware

and software used, etc.) Note anything abnormal and list any

onscreen messages you get when the problem occurs.

2. Call your dealer and describe the problem. Please have your man-

ual, product, and any helpful information readily available.

3. If your product is diagnosed as defective, obtain an RMA (return

merchandize authorization) number from your dealer. This allows

us to process your return more quickly.

4. Carefully pack the defective product, a fully-completed Repair and

Replacement Order Card and a photocopy proof of purchase date

(such as your sales receipt) in a shippable container. A product

returned without proof of the purchase date is not eligible for war-

ranty service.

5. Write the RMA number visibly on the outside of the package and

ship it prepaid to your dealer.

ADAM-6520 User Manual iv

Declaration of Conformity

This product has passed the CE test for environmental specifications

when shielded cables are used for external wiring. We recommend the use

of shielded cables. This kind of cable is available from Advantech. Please

contact your local supplier for ordering information.

FCC Class A

Note: This equipment has been tested and found to comply with the limits

for a Class A digital device, pursuant to part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial environ-

ment. This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instruction

manual, may cause harmful interference to radio communications. Opera-

tion of this equipment in a residential area is likely to cause harmful inter-

ference in which case the user will be required to correct the interference

at his own expense.

Technical Support and Assistance

Step 1. Visit the Advantech web site at www.advantech.com/support

where you can find the latest information about the product.

Step 2. Contact your distributor, sales representative, or Advantech's cus-

tomer service center for technical support if you need additional

assistance. Please have the following information ready before

you call:

- Product name and serial number

- Description of your peripheral attachments

- Description of your software (operating system, version, appli-

cation software, etc.)

- A complete description of the problem

- The exact wording of any error messages

Document Feedback

To assist us in making improvements to this manual, we would welcome

comments and constructive criticism. Please send all such - in writing to:

[email protected]

Contents

Chapter 1 Overview .......................................................... 2

1.1 Introduction ....................................................................... 2

1.1.1 High-Speed Transmission .............................................. 2

1.1.2 Flexible Mounting .......................................................... 2

1.1.3 Protection for Power Line & Ethernet Port ................... 2

1.1.4 Wide Operating Temperature Range ............................. 3

1.1.5 Easy Troubleshooting .................................................... 3

1.2 Features ............................................................................. 3

1.3 Specifications .................................................................... 4

1.4 Ordering Information ........................................................ 5

Chapter 2 Installation ....................................................... 8

2.1 Packing List....................................................................... 8

2.2 Top / Front / Rear View .................................................... 9

2.2.1 Dimensions (units:mm) ................................................ 9

Figure 2.1:Top View ...................................................... 9

Figure 2.2:Front Panel ................................................... 9

Figure 2.3:Rear View ..................................................... 9

2.3 LED Indicators ................................................................ 10

Table 2.1:ADAM-6520 Module LED Definitions ...... 10

2.4 Mounting ......................................................................... 11

Figure 2.4:Panel Mounting .......................................... 11

Figure 2.5:DIN-rail Mounting ..................................... 12

Figure 2.6:Piggyback Stacking .................................... 12

2.5 Network Connection ....................................................... 13

2.5.1 Connection to Devices ................................................. 13

2.5.2 Connection to other Hubs or Switches ........................ 13

2.6 Power Connection ........................................................... 13

ADAM-6520 User Manual vi

CHAPTER

Overview

This chapter gives an overview of the

ADAM-6520 series' features and full

specifications.

Sections include:

• Introduction

• Features

• Specifications

• Ordering Information

ADAM-6520 User Manual 2

Chapter 1 Overview

1.1 Introduction

ADAM-6520 modules are a 5-port industrial-grade 10/100 Mbps Ether-

net switch for fast and cost-efficient network expansion. They connect up

to 5 workstations and auto-detect both 10 and 100 Mbps network speeds.

Moreover, ADAM-6520 modules support auto crossover to provide a

flexible networking environment, connecting to the network via any port.

ADAM-6520 modules provide three methods for mounting in an indus-

trial environment: DIN rail, wall/panel, or piggyback stacking. ADAM-

6520 modules have a flexible input voltage range of +10~30 VDC at the

terminal block. ADAM-6520 operates from -10~70° C and ADAM-

6520L from 0~60° C, while ADAM-6520I is from -40 to 85°C. The

above features make ADAM-6520 modules more stable and reliable than

normal Ethernet switches. Thus, ADAM-6520 modules are especially

suitable for industrial environments with Ethernet networking like: semi-

conductor factories, warehouses, conveyer belt systems and more.

1.1.1 High-Speed Transmission

ADAM-6520 modules include a switch controller that automatically

senses transmission speeds (10/100 Mbps). RJ-45 interface also supports

auto-detection, so MDI or MDI-X is automatically selected and a cross-

over cable is not required. All Ethernet ports have memory buffers that

support the store-and-forward mechanism, assuring that data is properly

transmitted.

1.1.2 Flexible Mounting

Due to its versatility and innovative design, ADAM-6520 modules can be

fixed in three ways: DIN rail, panel and piggyback mounting.

1.1.3 Protection for Power Line & Ethernet Port

The power line of ADAM-6520 modules support supports up to 3000

VDC surge protection, which secure equipment against unregulated volt-

age and make systems safer and more reliable. Meanwhile, 4000 VDC

ESD protection for the Ethernet ports makes ADAM-6520 modules (not

including ADAM-6520L) more suitable for harsh environments.

3 Chapter1

1.1.4 Wide Operating Temperature Range

The operating temperature of ADAM-6520 is from -10~70° C, and

ADAM-6520L is from 0~60° C, while ADAM-6520I offers a very wide

range from -40 to 85° C. With such wide ranges you can use ADAM-

6520 modules in some of the harshest industrial environments that exist.

1.1.5 Easy Troubleshooting

There are six LED indicators supplied to aid troubleshooting for ADAM-

6520 modules. Each port has a pair of LEDs to indicate link status and

port activity. That makes it easy to indicate link status, power failure and

data reception for on-site diagnostics.

1.2 Features

• Provides 5 x 10/100 Mbps Ethernet ports with RJ-45 connector

• Supports full/half duplex flow control

• Supports MDI/MDI-X auto crossover

• Provides broadcast storm protection

• Embedded switch controller, supports auto-negotiation

• Embedded memory buffer, supports store-and-forward transmission

• Supports +10 ~ 30 VDC voltage

• Provides 3000 VDC surge protection for power line

• Provides 4000 VDC Ethernet ESD protection (except ADAM 6520L)

• Provides flexible mountings: DIN rail, panel, piggyback stacking

• Supports wide-range operating temperature

• 64 KB of SRAM on chip for frame buffering (ADAM-6520L: 48KB)

• Integrated address Look-Up Engine, supports 1K absolute MAC

addresses (ADAM-6520L: 2K)

ADAM-6520 User Manual 4

1.3 Specifications

Communications

Standard IEEE 802.3, IEEE 802.3u

LAN 10/100Base-TX

Transmission Distance 100 m

Transmission Speed up to 100 Mbps

Interface

Connectors 5 x RJ-45

LED Indicators Power, Link/Speed

Power

Power Connectors 2-pin removable screw terminal

Power

Consumption

ADAM-6520L: Max. 3W

ADAM-6520/6520I: Max. 2.4W

Power Input Unregulated 10 ~ 30 V DC

Mechanism

Dimensions (WxHxD) 70x102x27 mm

Enclosure IP30, ABS+PC with solid mounting kits

Mounting DIN 35 rail, stack, wall

Protection

ESD Protection 4,000 V DC (Ethernet)

(ADAM-6520/6520I only)

Surge Protection (EFT) 3000 V DC (Power)

This manual suits for next models

Table of contents

Other Advantech Switch manuals

Advantech

Advantech EKI-2728 User manual

Advantech

Advantech EKI-6558TI User manual

Advantech

Advantech 8GE(PoE)+2GE+2G SFP User manual

Advantech

Advantech EKI-7758F User manual

Advantech

Advantech EKI-7712G-4FMPI User manual

Advantech

Advantech EKI-2528i-m12 Installation and operation manual

Advantech

Advantech USB-4630 Installation and operation manual

Advantech

Advantech EKI-2728MI User manual

Advantech

Advantech EKI-7716 Series User manual

Advantech

Advantech EKI-9628G User manual

Advantech

Advantech ADAM-6000 series User manual

Advantech

Advantech eWorx SE500 User manual

Advantech

Advantech MicroTCA UTCA-5503 User manual

Advantech

Advantech EKI-2728I User manual

Advantech

Advantech EKI-9226G Series User manual

Advantech

Advantech B+B SmartWorx SE400 Series User manual

Advantech

Advantech ADAM-6520 Series User manual

Advantech

Advantech CSW-8 User manual

Advantech

Advantech B+B SMARTWORX IE-iMcV-T1-Mux/4 +Ethernet User manual

Advantech

Advantech EKI-3525M Installation and operation manual

Advantech

Advantech EKI-2728-AE User manual

Advantech

Advantech B+B SmartWorx 232BSS4 User manual

Advantech

Advantech B+B SmartWorx MiniMc-Gigabit User manual

Advantech

Advantech EKI-7712 Series User manual

Popular Switch manuals by other brands

URC

URC Total Control MFS-8 installation manual

Azbil

Azbil HPQ-D11 user manual

Sony

Sony DFS-900M operating instructions

SICK

SICK i17S operating instructions

F&F

F&F SZR-277 quick start guide

Shure

Shure UAMS/BK user guide

Dräger

Dräger X-zone Switch Off Instructions for use

Asco

Asco Joucomatic 349 Series manual

BT Mini Hub user guide

D-Link

D-Link DES-1226G manual

Johnson Controls

Johnson Controls FS80-C installation instructions

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Configuration guide

MicroNet

MicroNet SP1200A user manual

Ruijie

Ruijie RG-PF2920 Series Hardware installation and reference guide

Altinex

Altinex DA1914SX user guide

MiLAN

MiLAN MIL-SM2401M user guide

RJM

RJM MASTERMIND PBC/6X user manual

Atlas

Atlas MMK-KVM8 owner's manual