Advantech ICR-2701 User manual

Hardware Manual

Industrial Cellular Router

ICR-2701

Advantech Czech s.r.o., Sokolska 71, 562 04 Usti nad Orlici, Czech Republic

Document No. MAN-0069-EN, revision from 15th November, 2023.

electronic or mechanical, including photography, recording, or any information storage and retrieval system without written consent.

Information in this manual is subject to change without notice, and it does not represent a commitment on the part of Advantech.

Advantech Czech s.r.o. shall not be liable for incidental or consequential damages resulting from the furnishing, performance,

or use of this manual.

All brand names used in this manual are the registered trademarks of their respective owners. The use of trademarks or other

designations in this publication is for reference purposes only and does not constitute an endorsement by the trademark holder.

Used symbols

Danger – Information regarding user safety or potential damage to the router.

Attention – Problems that can arise in speciﬁc situations.

Information – Useful tips or information of special interest.

Contents

1. Product Overview 1

1.1 Product Introduction ......................................... 1

1.2 Hardware Overview ......................................... 2

1.3 Order Codes ............................................. 3

1.4 Product Revisions .......................................... 3

1.5 Package Contents and Accessories ................................ 4

1.6 Product Dimensions ......................................... 6

1.7 Mounting Recommendations .................................... 8

1.8 DIN Rail Mounting .......................................... 9

1.9 Product Label ............................................. 10

2. Hardware Functionality 11

2.1 Antennas ............................................... 11

2.2 Ethernet Interfaces .......................................... 11

2.3 Power Supply ............................................. 12

2.4 Low Power Mode ........................................... 13

2.5 USB Port ............................................... 13

2.6 LED Status Indication ........................................ 15

2.7 Reset Functions ........................................... 16

3. First Use 17

3.1 Accessories Connection ....................................... 17

3.2 Router Conﬁguration ......................................... 17

4. Technical Speciﬁcations 18

4.1 Basic Parameters ........................................... 18

4.2 Standards and Regulations ..................................... 19

4.3 Type Tests and Environmental Conditions ............................. 20

4.4 Parameters of WiFi .......................................... 21

4.5 System Conﬁguration ........................................ 22

Appendix A: Troubleshooting 23

Appendix B: Customer Support 25

Appendix C: Regulatory & Safety Information 26

Appendix D: Related Documents 27

List of Figures

1 Hardware Overview of the Router .................................. 2

2 Metal Box – Top, Side and Front View ............................... 6

3 Plastic Box – Top, Side and Front View ............................... 7

4 Position of the DIN Rail Clip ..................................... 9

5 Removing Router from the DIN Rail ................................. 9

6 Product Label ............................................. 10

7 Ethernet Connector Pinout ...................................... 11

8 Connection of Power Supply .................................... 12

9 Position of the Grounding Screw .................................. 12

10 USB Connector Pinout ........................................ 14

11 Resetting the Router ......................................... 16

List of Tables

1 Hardware Overview of the Router .................................. 2

2 Order Codes Overview ........................................ 3

3 HW Revisions History ........................................ 3

4 Contents of Package ......................................... 5

5 Ethernet Connector Pinout Description ............................... 11

6 Power Supply Pinout ......................................... 12

7 USB Connector Pinout ........................................ 14

8 LED Status Indication ........................................ 15

9 Basic Parameters ........................................... 18

10 Standards and Regulations ..................................... 19

11 Type Tests and Environmental Conditions ............................. 20

12 Technical Parameters of WiFi .................................... 21

13 System Conﬁguration ........................................ 22

1. Product Overview

1.1 Product Introduction

Industrial router ICR-2701 is LAN Router &Edge Computing Gateway focused on the global market.

The router, which may have a metal or plastic box, is equipped with two independently conﬁgurable

Ethernet ports, with one USB 2.0 host interface and with LEDs for status indication. The router can be

equipped with a dual-band WiFi module, but this must be part of the initial conﬁguration – it cannot be

assembled to the router at some point in the future.

The router supports the Low Power Mode and hardware watchdog, which monitors the router status

and performs an automatic restart if required.

The router supports VPN tunnel creation using various protocols to ensure safe communications. The

router provides diagnostic functions which include automatic monitoring of the wireless and wired connec-

tions, automatic restart in case of connection losses, and a hardware watchdog that monitors the router

status.

With open Linux platform and wide possibilities of programming customer SW applications in Python,

C/C++. The Advantech existing app library Router Apps (formerly User modules) with apps already de-

veloped to enhance speciﬁc router functionality including industrial protocol conversions and support of IoT

platforms such as MS Azure,Cumulocity,ThingWorx, and others are supported on the router.

Examples of possible applications

• mobile ofﬁce

• security system

• remote monitoring

• vending and dispatcher machines

ICR-2701 Hardware Manual (preliminary version) 1

1. Product Overview 1.2 Hardware Overview

1.2 Hardware Overview

The router case preview is shown in Figure 1. A short description of hardware parts of the router is listed

in Table 1, including the links to the chapters with a detailed description. For a router in a plastic box, the

description of the components is similar.

Figure 1: Hardware Overview of the Router

# Item/Caption Type Description

1 LED - Status LED indication; see Chapter 2.6.

2 WiFi RP-SMA

female

WiFi antenna connector; see Chapter 2.1 for more infor-

mation and Chapter 4.4 for WiFi parameters.

3 USB USB-A USB-A type socket connector; see Chapter 2.5.

4 ETH0, ETH1 RJ45 100 MB Ethernet connection for the ﬁrts and second LAN;

see Chapter 2.2.

5 PWR 2-pin

terminal

Power supply socket; see Chapter 2.3.

6 RST - Button to reboot the router or to restore the default

conﬁguration; see Chapter 2.7.

7 DIN clip - DIN rail clip, included as standard accessories; see Chap-

ter 1.8.

8 Grounding

screw

M3 Pay attention to proper grounding of model with metal box;

see Chapter 2.3.

Table 1: Hardware Overview of the Router

ICR-2701 Hardware Manual (preliminary version) 2

1. Product Overview 1.3 Order Codes

1.3 Order Codes

Order codes overview is shown in the table below.

Order code Conﬁguration

ICR-2701 metal box, ETH0, ETH1, USB

ICR-2701P plastic box, ETH0, ETH1, USB

ICR-2701A01 metal box, ETH0, ETH1, USB, accessories with Ethernet cable, two cel-

lular antennas, and EU power supply

ICR-2701PA01 plastic box, ETH0, ETH1, USB, accessories with Ethernet cable, two

cellular antennas, and EU power supply

ICR-2701A02 metal box, ETH0, ETH1, USB, accessories with Ethernet cable, two cel-

lular antennas, and UK power supply

ICR-2701PA02 plastic box, ETH0, ETH1, USB, accessories with Ethernet cable, two

cellular antennas, and UK power supply

ICR-2701Wmetal box, ETH0, ETH1, USB, dual-band WiFi

ICR-2701WP plastic box, ETH0, ETH1, USB, dual-band WiFi

ICR-2701WA01 metal box, ETH0, ETH1, USB, dual-band WiFi,accessories with Ether-

net cable, two cellular with one WiFi antennas, and EU power supply

ICR-2701WPA01 plastic box, ETH0, ETH1, USB, dual-band WiFi,accessories with Eth-

ernet cable, two cellular with one WiFi antennas, and EU power supply

ICR-2701WA02 metal box, ETH0, ETH1, USB, dual-band WiFi,accessories with Ether-

net cable, two cellular with one WiFi antennas, and UK power supply

ICR-2701WPA02 plastic box, ETH0, ETH1, USB, dual-band WiFi,accessories with Eth-

ernet cable, two cellular with one WiFi antennas, and UK power supply

Table 2: Order Codes Overview

1.4 Product Revisions

For the product revision history, see the table below. The revision number is printed on the packaging

and product labels.

The router GUI can also display the product revision under Status -> General -> System Information ->

Product Revision. Please note that the default revision (Rev.1.0) is unavailable here.

Rev.# Description

1.0 Initial version (revision number not printed on the labels).

2.0 WiFi support added to the mainboard; see PCN-2023-10 for details.

2.1 Not released for this model.

Table 3: HW Revisions History

ICR-2701 Hardware Manual (preliminary version) 3

1. Product Overview 1.5 Package Contents and Accessories

1.5 Package Contents and Accessories

Table 4refers to router package contents and other accessories, which depend on the order code; see

Chapter 1.3. You can order an accessory separately; use the order code mentioned.

Description Figure Q’ty

Router in metal or plastic box 1 pc

DIN rail clip with screws (screws differ for metal

and plastic versions) 1 set

2-pin terminal block for power supply (deployed on

the router) 1 pc

Printed Quick Start Guide Leaﬂet 1 pc

Ethernet cross cable of length 1.5 m.

Order code: BB-KD-ETH 0/1pc

WiFi Antenna (RP-SMA male).

Order code: BB-AW-A2458G-FSRPK 0/1pc

Wall mount power supply, 12V/1A with EU plug.

Order code: BB-RPS-v2-EU 0/1pc

Continued on the next page

ICR-2701 Hardware Manual (preliminary version) 4

Other manuals for ICR-2701

This manual suits for next models

Table of contents

Other Advantech Network Router manuals

Advantech

Advantech SL305 User manual

Advantech

Advantech ER75s User manual

Advantech

Advantech Libratum ICR-2834 User manual

Advantech

Advantech ICR-2432 User manual

Advantech

Advantech EKI-2726FHPI Series Installation and operation manual

Advantech

Advantech SmartFlex SR304 User manual

Advantech

Advantech ICR-3201 Series User manual

Advantech

Advantech ICR-2431 User manual

Advantech

Advantech SmartStart SL302 User manual

Advantech

Advantech ADAM-6520 Series User manual

Advantech

Advantech EKI-2748FI User manual

Advantech

Advantech MIC-3666 User manual

Advantech

Advantech B+B SmartWorx SmartMotion ST355 User manual

Advantech

Advantech SmartStart Series Guide

Advantech

Advantech ICR-3201 Series Guide

Advantech

Advantech ICR-3241 User manual

Advantech

Advantech EKI-7526I User manual

Advantech

Advantech SmartFlex SR305 User manual

Advantech

Advantech IMC-150LI Installation and operation manual

Advantech

Advantech SmartMotion ST352 User manual

Advantech

Advantech ICR-4453 User manual

Advantech

Advantech EKI-7626C User manual

Advantech

Advantech ICR-3241 User manual

Advantech

Advantech SmartStart SL306 User manual

Popular Network Router manuals by other brands

Allnet

Allnet ALL0333AU user guide

HomeSeer

HomeSeer HT-SEL Getting started guide

Sercomm

Sercomm Genesis OC3505D Quick installation guide

Billion

Billion BIPAC 5102 Series user manual

TP-Link

TP-Link TD-8817 QIG

Motorola

Motorola MR1900 user guide

Digi

Digi IX14 user guide

Cisco

Cisco NCS 540 Hardware installation guide

XAVi

XAVi X8821e user manual

BEC

BEC 6200WZL Quick installation guide

MikroTik

MikroTik hAP ac3 Series quick start

Korenix

Korenix JetNet 5428G Series user manual

NETGEAR

NETGEAR FS526T - Switch installation guide

Korenix

Korenix JetNet 5710G Series user manual

Automated Logic

Automated Logic ZN551 Technical instructions

Cisco

Cisco ASR 1000 Series Installation and configuration guide

EnGenius

EnGenius ESR-9710 quick start guide

Cisco

Cisco 805 Series Product overview