Advantech FPM-3060G Series User manual

FPM-3060G Series

Flat Panel Monitor with

6" Color TFT/LCD Display

User Manual

FPM-3060G Series User Manual ii

This document is copyrighted by Advantech Co., Ltd. All rights are

reserved. Advantech Co., Ltd. reserves the right to make improvements to

the products described in this manual at any time. Specifications are thus

subject to change without notice.

No part of this manual may be reproduced, copied, translated, or transmit-

ted in any form or by any means without the prior written permission of

Advantech Co., Ltd. Information provided in this manual is intended to

be accurate and reliable. However, Advantech Co., Ltd., assumes no

responsibility for its use, nor for any infringements upon the rights of

third parties which may result from its use.

All brand and product names mentioned herein are trademarks or regis-

tered trademarks of their respective holders.

This Manual Covers the Following Models

• FPM-3060G

Part No. 2003306010 1st Edition

Printed in Taiwan June 2005

iii

Product Warranty (1 year)

Advantech warrants to you, the original purchaser, that each of its prod-

ucts will be free from defects in materials and workmanship for one year

from the date of purchase.

This warranty does not apply to any products which have been repaired or

altered by persons other than repair personnel authorized by Advantech,

or which have been subject to misuse, abuse, accident or improper instal-

lation. Advantech assumes no liability under the terms of this warranty as

a consequence of such events.

All defective products under normal / standard operation will be serviced

by Advantech’s global RMA system. If an Advantech product is defec-

tive, it will be repaired or replaced at no charge during the warranty

period. For out-of-warranty repairs, you will be billed according to the

cost of replacement materials, service time and freight. Please consult

your dealer for more details.

If you think you have a defective product, follow these steps:

1. Collect all the information about the problem encountered. (For

example, CPU speed, Advantech products used, other hardware

and software used, etc.) Note anything abnormal and list any

onscreen messages you get when the problem occurs.

2. Call your dealer and describe the problem. Please have your man-

ual, product, and any helpful information readily available.

3. If your product is diagnosed as defective, obtain an RMA (return

merchandize authorization) number from your dealer. This allows

us to process your return more quickly.

4. Carefully pack the defective product, a fully-completed Repair and

Replacement Order Card and a photocopy proof of purchase date

(such as your sales receipt) in a shippable container. A product

returned without proof of the purchase date is not eligible for war-

ranty service.

5. Write the RMA number visibly on the outside of the package and

ship it prepaid to your dealer.

FPM-3060G Series User Manual iv

FCC Class B

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interfer-

ence when the equipment is operated in a residential environment. This

equipment generates, uses and can radiate radio frequency energy. If not

installed and used in accordance with this user's manual, it may cause

harmful interference to radio communications.

Note that even when this equipment is installed and used in accordance

with this user’s manual, there is still no guarantee that interference will

not occur. If this equipment is believed to be causeing harmful interfer-

ence to radio or television reception, this can be determined by turning

the equipment on and off. If the interference is occurring, the user is

encouraged to try to correct the interference by one or more of the follow-

ing measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment and the receiver

• Connect the equipment to a power outlet on a circuit different from that

to which the receiver is connected

• Consult the dealer or an experienced radio/TV technician for help

Packing List

Before installing your equipment, make sure that the following materials

have been received:

• FPM-3060G Series flat panel monitor

• Accessory pack, including:

- AC/DC adapter

- AC/DC power adapter bracket

- Video signal cable, 1.8m

- Fixed panel-mounted bracket x 6 pcs

- Screw Bags (M4x25 mm screws x 6 pcs)

- DC in Power Cord bracket x 1 piece

- RS-232 cable, 1.8m (FPM-3060G-R only)or

USB cable, 1.8m (FPM-3060G-U only)

- Driver/manual CD-ROM

If any of these items are missing or damaged, contact your distributor or

sales representative immediately.

Additional Information and Assistance

1. Visit the Advantech web site at www.advantech.com where you can

find the latest information about the product.

2. Contact your distributor, sales representative, or Advantech's cus-

tomer service center for technical support if you need additional assis-

tance. Please have the following information ready before you call:

• Product name and serial number

• Description of your peripheral attachments

• Description of your software (operating system, version, application

software, etc.)

• A complete description of the problem

• The exact wording of any error messages

FPM-3060G Series User Manual vi

Safety Instructions

1. Read these safety instructions carefully.

2. Keep this User's Manual for later reference.

3. Disconnect this equipment from any AC outlet before cleaning. Use a

damp cloth. Do not use liquid or spray detergents for cleaning.

4. For plug-in equipment, the power outlet socket must be located near

the equipment and must be easily accessible.

5. Keep this equipment away from humidity.

6. Put this equipment on a reliable surface during installation. Dropping

it or letting it fall may cause damage.

7. The openings on the enclosure are for air convection. Protect the

equipment from overheating. DO NOT COVER THE OPENINGS.

8. Make sure the voltage of the power source is correct before connect-

ing the equipment to the power outlet.

9. Position the power cord so that people cannot step on it. Do not place

anything over the power cord.

10. All cautions and warnings on the equipment should be noted.

11. If the equipment is not used for a long time, disconnect it from the

power source to avoid damage by transient overvoltage.

12. Never pour any liquid into an opening. This may cause fire or electri-

cal shock.

13. Never open the equipment. For safety reasons, the equipment should

be opened only by qualified service personnel.

14. If one of the following situations arises, get the equipment checked

by service personnel:

a. The power cord or plug is damaged.

b. Liquid has penetrated into the equipment.

c. The equipment has been exposed to moisture.

d. The equipment does not work well, or you cannot get it to work

according to the user's manual.

e. The equipment has been dropped and damaged.

f. The equipment has obvious signs of breakage.

vii

15. DO NOT LEAVE THIS EQUIPMENT IN AN UNCONTROLLED

ENVIRONMENT WHERE THE STORAGE TEMPERATURE IS

BELOW -20° C (-4° F) OR ABOVE 60° C (140° F). THIS MAY

DAMAGE THE EQUIPMENT.

The sound pressure level at the operator's position according to IEC 704-

1:1982 is no more than 70dB(A).

DISCLAIMER: This set of instructions is given according to IEC 704-1.

Advantech disclaims all responsibility for the accuracy of any statements

contained herein.

Wichtige Sicherheishinweise

1. Bitte lesen sie Sich diese Hinweise sorgfältig durch.

2. Heben Sie diese Anleitung für den späteren Gebrauch auf.

3. Vor jedem Reinigen ist das Gerät vom Stromnetz zu trennen. Ver-

wenden Sie Keine Flüssig-oder Aerosolreiniger. Am besten dient ein

angefeuchtetes Tuch zur Reinigung.

4. Die NetzanschluBsteckdose soll nahe dem Gerät angebracht und

leicht zugänglich sein.

5. Das Gerät ist vor Feuchtigkeit zu schützen.

6. Bei der Aufstellung des Gerätes ist auf sicheren Stand zu achten. Ein

Kippen oder Fallen könnte Verletzungen hervorrufen.

7. Die Belüftungsöffnungen dienen zur Luftzirkulation die das Gerät vor

überhitzung schützt. Sorgen Sie dafür, daB diese Öffnungen nicht

abgedeckt werden.

8. Beachten Sie beim. AnschluB an das Stromnetz die AnschluBwerte.

9. Verlegen Sie die NetzanschluBleitung so, daB niemand darüber fallen

kann. Es sollte auch nichts auf der Leitung abgestellt werden.

10. Alle Hinweise und Warnungen die sich am Geräten befinden sind zu

beachten.

11. Wird das Gerät über einen längeren Zeitraum nicht benutzt, sollten

Sie es vom Stromnetz trennen. Somit wird im Falle einer Überspan-

nung eine Beschädigung vermieden.

12. Durch die Lüftungsöffnungen dürfen niemals Gegenstände oder Flüs-

sigkeiten in das Gerät gelangen. Dies könnte einen Brand bzw. elek-

trischen Schlag auslösen.

FPM-3060G Series User Manual viii

13. Öffnen Sie niemals das Gerät. Das Gerät darf aus Gründen der elek-

trischen Sicherheit nur von authorisiertem Servicepersonal geöffnet

werden.

14. Wenn folgende Situationen auftreten ist das Gerät vom Stromnetz zu

trennen und von einer qualifizierten Servicestelle zu überprüfen:

a - Netzkabel oder Netzstecker sind beschädigt.

b - Flüssigkeit ist in das Gerät eingedrungen.

c - Das Gerät war Feuchtigkeit ausgesetzt.

d - Wenn das Gerät nicht der Bedienungsanleitung entsprech

end funktioniert oder Sie mit Hilfe dieser Anleitung keine

Verbesserung erzielen.

e - Das Gerät ist gefallen und/oder das Gehäuse ist beschädigt.

f - Wenn das Gerät deutliche Anzeichen eines Defektes aufweist.

Der arbeitsplatzbezogene Schalldruckpegel nach DIN 45 635 Teil

1000 beträgt 70dB(A) oder weiger.

15. VOSICHT: Explisionsgefahr bei unsachgemaben Austausch der Bat-

terie.Ersatz nur durch densellben order einem vom Hersteller empfohlen-

emahnlichen Typ. Entsorgung gebrauchter Batterien navh Angaben des

Herstellers.

16. ACHTUNG: Es besteht die Explosionsgefahr, falls die Batterie auf

nicht fachmännische Weise gewechselt wird. Verfangen Sie die Batterie

nur gleicher oder entsprechender Type, wie vom Hersteller empfohlen.

Entsorgen Sie Batterien nach Anweisung des Herstellers.

Der arbeitsplatzbezogene Schalldruckpegel nach DIN 45 635 Teil 1000

beträgt 70dB(A) oder weiger.

Haftungsausschluss: Die Bedienungsanleitungen wurden entsprechend

der IEC-704-1 erstellt. Advantech lehnt jegliche Verantwortung für die

Richtigkeit der in diesem Zusammenhang getätigten Aussagen ab.

DISCLAIMER: This set of instructions is given according to IEC704-1.

Advantech disclaims all responsibility for the accuracy of any statements

contained herein.

Contents

Chapter 1 Introduction ..................................................... 2

1.1 Introduction ....................................................................... 2

1.2 Specifications .................................................................... 2

1.3 LCD Specifications ........................................................... 3

1.4 Power Adapter Specifications ........................................... 3

1.5 Connectors......................................................................... 4

1.6 Dimensions........................................................................ 5

Figure 1.1:FPM-3060G Chassis Dimensions ................ 5

Chapter 2 System Setup.................................................... 8

2.1 Mounting FPM-3060G...................................................... 8

2.1.1 Wall Mounting ............................................................... 8

Figure 2.1:Wall Mounting ............................................. 8

2.1.2 Panel Mounting .............................................................. 9

Figure 2.2:Panel Mounting ............................................ 9

2.1.3 Swing-ARM (VESA ARM standard compatible) ......... 9

Figure 2.3:Swing-ARM for the FPM-3060G series ...... 9

2.2 Power Adapter................................................................. 10

2.3 Mounted with MBPC-200 or UNO-2000 series ............ 10

2.3.1 Mounted with MBPC-200 series product .................... 10

2.3.2 Mount with UNO-2000 series ...................................... 10

Appendix A Display Timing Mode & OSD ...................... 12

A.1 Supported Input Timing Modes ...................................... 12

Table A.1:Supported Input Formats ............................ 12

A.2 Keypad Interface ............................................................. 13

A.3 Power Indicator LED Status............................................ 13

A.4 OSD Function.................................................................. 14

Appendix B Touchscreen ................................................... 16

B.1 Introduction ..................................................................... 16

B.2 Touchscreen Specifications............................................. 16

B.3 Installing Driver for Windows 2000/XP ......................... 17

B.4 Touch Panel Device Driver Settings ............................... 19

FPM-3060G Series User Manual x

Other manuals for FPM-3060G Series

Table of contents

Other Advantech Monitor manuals

Advantech

Advantech IDS-3121 Series User manual

Advantech

Advantech RMD-1150F-8 User manual

Advantech

Advantech FPM-800S Series User manual

Advantech

Advantech IDK-1112P-50XGA1 User manual

Advantech

Advantech FPM-3150TVE Series User manual

Advantech

Advantech iHealthcare POC-W213 Instruction manual

Advantech

Advantech FPM-3121G User manual

Advantech

Advantech IDS-3221W Series User manual

Advantech

Advantech USC-250 Installation and operation manual

Advantech

Advantech IDS-3119 Series User manual

Advantech

Advantech IDK-2110R XGA Series User manual

Advantech

Advantech PAX-324 User manual

Advantech

Advantech IDK-121R-42XGA1 User manual

Advantech

Advantech PDC-W240 Instruction Manual

Advantech

Advantech IDK-2115N-K2XGB2 User manual

Advantech

Advantech IDK-1110P-50XGB1 User manual

Advantech

Advantech IDK-2121W User manual

Advantech

Advantech EPD-210 User manual

Advantech

Advantech ES-3115 G-XA User manual

Advantech

Advantech EPD-023 User manual

Advantech

Advantech SPC-815 User manual

Advantech

Advantech POC-WP242 User manual

Advantech

Advantech FPM-3150 Series User manual

Advantech

Advantech IDP-31270W User manual

Popular Monitor manuals by other brands

Linear Acoustic

Linear Acoustic LQ-1000 user guide

AOC

AOC I2579V user manual

Gateway

Gateway FPD1520 user guide

Furuno

Furuno Mu 120c Operator's manual

Asus

Asus VB171D - 17" LCD Monitor Service manual

Dell

Dell S2230MX Setting up

Philips

Philips 107C64 user manual

Dell

Dell S2409WFP user guide

EverFocus

EverFocus EN-7517E instruction manual

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Service manual

Dell

Dell Precision 7680 Connection guide

LG 50PM1M - - 50" Plasma Panel Service manual

Bosch

Bosch DDU 9 manual

Acer

Acer A231HL user manual

Philips

Philips 86BDL4152T user manual

NEC

NEC AccuSync LCD5V user manual

Emay

Emay SleepO2 user manual

IBM

IBM 6360 Product support manual