Advantech I/O Module 5000 Series User manual

ADAM-5000 Series

I/O Module

User's Manual

This document is copyrighted, 1997, by Advantech Co., Ltd. All rights are

reserved. Advantech Co., Ltd., reserves the right to make improvements to the

products described in this manual at any time without notice.

No part of this manual may be reproduced, copied, translated or transmitted in

any form or by any means without the prior written permission of Advantech Co.,

Ltd. Information provided in this manual is intended to be accurate and reliable.

However, Advantech Co., Ltd. assumes no responsibility for its use, nor for any

infringements upon the rights of third parties, which may result from its use.

Acknowledgments

ADAM is a trademark of Advantech Co., Ltd.

IBM and PC are trademarks of International Business

Machines Corporation.

Second Edition

March 2005

I/O Module Introduction

ADAM-5000 Series I/O Module User’s Manual

Table of Contents

Chapter 1 Introduction ….……..................…..................………….1-1

Chapter 2 Analog Input Modules..................….................…....... 2-1

2.1 ADAM-5013 3-channel RTD input module…............................2-2

2.2 ADAM-5017 8-channel analog input module…….…............... 2-5

2.3 ADAM-5017H 8-channel high speed analog input module…. 2-8

2.4 ADAM-5018 7-channel thermocouple input module ………..2-13

Chapter 3 Analog Output Modules .............................................. 3-1

3.1 ADAM-5024 4-channel analog output module...…...................3-2

Chapter 4 DigitalInput/OutputModules..................…....................4-1

4.1 ADAM-5050 16-channel universal digital I/O module...............4-2

4.2 ADAM-5051 series digital input module.........….......................4-5

4.2.1 ADAM-5051(D) 16-channel digital input module …….…......4-5

4.2.2 ADAM-5051S 16-channel Isolated Digital Input Module w/LED ..….4-7

4.3 ADAM-5052 8-channel isolated digital input module…...........4-9

4.4 ADAM-5055S 16-channel Isolated Digital I/O Module with LED……...4-11

4.5 ADAM-5056(D) series digital output module w/LED……........4-13

4.5.1 ADAM-5056(D) 16-channel digital output module w/LED..4-13

4.5.2 ADAM-5056S 16-channel Isolated Digital Output Module w/ LED.4-14

4.5.3 ADAM-5056SO 16-channel Isolated Digital Output Module wLED4-16

4.6 Relay Output Modules ………….…..................….................…4-18

4.6.1 ADAM-5060 relay output module……………….….......…….4-18

4.6.2 ADAM-5068 relay output module……………………………..4-19

4.6.3 ADAM-5069 relay output module……………………………..4-21

4.7 Counter/Frequency Module………………………………..……4-22

4.7.1 ADAM-5080 4-channel Counter/Frequency Module………..4.22

I/O Module Introduction

ADAM-5000 Series I/O Module User’s Manual

Chapter 5 Serial Communication Module………..….................... 5-1

5.1 ADAM-5090 4-port RS-232 Communication Module................5-2

Chapter 6 Analog I/O Modules Calibration.................................. 6-1

6.1 Analog input module calibration……………………………….. 6-2

6.2 ADAM-5013 RTD Input Resistance Calibration……………….. 6-7

6.3 Analog output module calibration .......………………………… 6-9

Introduction 1

Introduction

ADAM 5000 IO modules User’s Manual

This manual introduces the detail specifications functions and

application wiring of each ADAM-5000 I/O modules. To organize an

ADAM-5510 Series Controller, you need to select I/O modules to interface

the main unit with field devices or processes that you have previously

determined. Advantech provides 19 types of ADAM-5000 I/O modules for

various applications so far. Following table is the I/ O modules support list we

provided for user’s choice.

Module Name Specification Reference

ADAM-5013 3-ch. RTD input Isolated

ADAM-5017 8-ch. AI Isolated

ADAM-5017H 8-ch. High speed AI Isolated

ADAM-5018 7-ch. Thermocouple input Isolated

Analog I/O

ADAM-5024 4-ch. AO Isolated

ADAM-5050 7-ch. D I/O Non-isolated

ADAM-5051 16-ch. DI Non-isolated

ADAM-5051D 16-ch. DI w/LED Non-isolated

ADAM-5051S 16-ch. Isolated DI w/LED Isolated

ADAM-5052 8-ch. DI Isolated

ADAM-5055S 16-ch. Isolated DI/O w/LED Isolated

ADAM-5056 16-ch. DO Non-isolated

ADAM-5056D 16-ch. DO w/LED Non-isolated

ADAM-5056S 16-ch. Isolated DO w/LED Isolated

Digital I/O

ADAM-5056SO 16-ch. Iso. DO w/LED (source) Isolated

ADAM-5060 6-ch. Relay output Isolated

ADAM-5068 8-ch. Relay output Isolated

Relay Output

ADAM-5069 8-ch. Relay output Isolated

Counter/Frequency ADAM-5080 4-ch. Counter/Frequency Isolated

Serial I/O ADAM-5090 4-port RS232 Non-isolated

Table 1-1: I/O Module Support List

Analog Input Modules 2

Analog Input module

ADAM 5000 IO modules User’s Manual

Analog input modules use an A/D converter to convert sensor voltage,

current, thermocouple or RTD signals into digital data. The digital data is then

translated into engineering units. The analog input modules protect your

equipment from ground loops and power surges by providing opto-isolation

of the A/D input and transformer based isolation up to3,000V

2.1 ADAM-5013 3-channel RTD input module

The ADAM-5013 is a 16-bit, 3-channel RTD input module that features

programmable input ranges on all channels. This module is an extremely

cost-effective solution for industrial measurement and monitoring

applications. Its opto-isolated inputs provide 3,000 V

of isolation between

the analog input and the module, protecting the module and peripherals

from damage due to high input line voltage.

Note: Owing to the conversion time required by the A/D converter, the

initialization time of each ADAM-5013 module is 5 seconds. Thus the

total initialization time will be about 20 seconds if all 4 I/O slots in

an ADAM-5000 main unit contain ADAM-5013 modules.

Figure 2-1: ADAM-5013 module frontal view

Chapter 2

-3

Application wiring

Figure 2-2: RTD inputs

Analog Input module

ADAM 5000 IO modules User’s Manual

Technical specifications of ADAM-5013

Analog input channels three

Input type Pt or Ni RTD

Pt -100 to 100°C a=0.00385

Pt 0 to 100°C a=0.00385

Pt 0 to 200°C a=0.00385

Pt 0 to 600°C a=0.00385

Pt -100 to 100°C a=0.00392

Pt 0 to 100°C a=0.00392

Pt 0 to 200°C a=0.00392

Pt 0 to 600°C a=0.00392

Ni -80 to 100°C

RTD type and temperature

range

Ni 0 to 100°C

Isolation voltage 3000 VDC

Sampling rate 10 samples/sec (total)

Input impedance 2 MΩ

Bandwidth 13.1 Hz @ 50 Hz, 15.72 Hz @ 60 Hz

Input connections 2, 3 or 4 wire

Accuracy ± 0.1% or better

Zero drift ± 0.015 °C/°C

Span drift ± 0.01 °C/°C

CMR@50/60 Hz 150 dB

NMR@50/60 Hz 100 dB

Power consumption 1.2 W

Table 2-1: Technical specifications of ADAM-5013

Chapter 2

-5

2.2 ADAM-5017 8-channel analog input module

The ADAM-5017 is a 16-bit, 8-channel analog differential input module

that provides programmable input ranges on all channels. It accepts

millivolt inputs (±150mV, ±500mV), voltage inputs (±1V, ±5V and ±10V) and

current input (±20 mA, requires 125 ohms resistor). The module provides

data to the host computer in engineering units (mV, V or mA). This module

is an extremely cost-effective solution for industrial measurement and

monitoring applications. Its opto-isolated inputs provide 3,000 V

isolation between the analog input and the module, protecting the module and

peripherals from damage due to high input line volt- age. Additionally, the

module uses analog multiplexers with active over- voltage protection. The

active protection circuitry assures that signal fidelity is maintained even

under fault conditions that would destroy other multiplexers. This module

can withstand an input voltage surge of 70 Vp-p with ±15 V supplies.

Figure 2-3: ADAM-5017 module frontal view

This manual suits for next models

Table of contents

Other Advantech I/O System manuals

Advantech

Advantech ADAM-6050W User manual

Advantech

Advantech ADAM-3600-A1F User manual

Advantech

Advantech PCIE-1730 Series User manual

Advantech

Advantech ADAM-6100EI Series User manual

Advantech

Advantech AIIS-E730 Installation and operation manual

Advantech

Advantech WISE-2200-M Installation and operation manual

Advantech

Advantech B+B SmartWorx Zlinx ZZ24D-NA-SR User manual

Advantech

Advantech PCI-1730 User manual

Advantech

Advantech PCI-1758UDO Installation and operation manual

Advantech

Advantech WISE-5000 Series User manual

Advantech

Advantech USB-4751 User manual

Advantech

Advantech USB-582 Installation and operation manual

Advantech

Advantech MIOe-220 Installation and operation manual

Advantech

Advantech PCL-722 User manual

Advantech

Advantech AMAX-5000 Series User manual

Advantech

Advantech ADAM-6300 Series User manual

Advantech

Advantech ADAM-6100PN Series User manual

Advantech

Advantech AMAX-5000 Series User manual

Advantech

Advantech USB-5817 Installation and operation manual

Advantech

Advantech PCI-1758UDIO Installation and operation manual

Advantech

Advantech 98910770500 Installation and operation manual

Advantech

Advantech WISE-4610 Series User manual

Advantech

Advantech ADAM-3013 User manual

Advantech

Advantech PCI-1750 User manual

Popular I/O System manuals by other brands

WAGO

WAGO 750-344 manual

Teknim

Teknim TWM-1887 Installation & user manual

Intelligent Appliance

Intelligent Appliance IA-2662-E user manual

BERGHOF

BERGHOF ECC DIO 16/16 User handbook

Festo

Festo CP-E08-M12-CL manual

Measurement Computing

Measurement Computing PCI-DAS64/M1/16 user guide

Hitachi

Hitachi HX-RIO3 Series user manual

NUUO

NUUO SCB-A08 user manual

M-system

M-system R3Y-RS8 instruction manual

jablotron

jablotron JB-110N user manual

Omron

Omron SYSMAC C200H Operation guide

DOLD

DOLD SAFEMASTER M Safety Technique

ABB

ABB OPT-MF-001 user manual

Omron

Omron SYSMAC C2000H Operation guide

Helmholz

Helmholz TB20 manual

ICP DAS USA

ICP DAS USA tM-AD2 quick start

Automationdirect.com

Automationdirect.com DL305 manual

WAGO

WAGO I/O-SYSTEM 750 manual