ADTRAN NetVanta 1524 User manual

This manual suits for next models

1

Table of contents

Other ADTRAN Switch manuals

ADTRAN

ADTRAN NetVanta 1531P User manual

ADTRAN

ADTRAN NetVanta 1224 User manual

ADTRAN

ADTRAN TRDDS-R Instruction Manual

ADTRAN

ADTRAN DDM+ H2TU-C User manual

ADTRAN

ADTRAN 2FXS/DPO PM Product manual

ADTRAN

ADTRAN 1703594G1 User manual

ADTRAN

ADTRAN NetVanta Series User manual

ADTRAN

ADTRAN Small Form-Factor Pluggable Gigabit Ethernet User manual

ADTRAN

ADTRAN Hub Instruction Manual

ADTRAN

ADTRAN NetVanta 1224ST User manual

ADTRAN

ADTRAN NetVanta 1550 Series User manual

ADTRAN

ADTRAN NetVanta 1238 PoE User manual

ADTRAN

ADTRAN 1xN Instruction Manual

ADTRAN

ADTRAN 1200766L1 User manual

ADTRAN

ADTRAN ATLAS 550 User manual

ADTRAN

ADTRAN NetVanta 1224R PoE User manual

ADTRAN

ADTRAN ACT LIU Maintenance and service guide

ADTRAN

ADTRAN E220 HFAC HDSL2 Instruction Manual

ADTRAN

ADTRAN NetVanta 1224STR PWR User manual

ADTRAN

ADTRAN netvanta 1230 series User manual

ADTRAN

ADTRAN 7912 Instruction Manual

ADTRAN

ADTRAN NetVanta 1224STR PWR User manual

ADTRAN

ADTRAN D4 TRDDB User manual

ADTRAN

ADTRAN D4 OCU DP (ETR) D4-OCU Instruction Manual

Popular Switch manuals by other brands

URC

URC Total Control MFS-8 installation manual

Azbil

Azbil HPQ-D11 user manual

Sony

Sony DFS-900M operating instructions

SICK

SICK i17S operating instructions

F&F

F&F SZR-277 quick start guide

Shure

Shure UAMS/BK user guide

Dräger

Dräger X-zone Switch Off Instructions for use

Asco

Asco Joucomatic 349 Series manual

BT

BT Mini Hub user guide

D-Link

D-Link DES-1226G manual

Johnson Controls

Johnson Controls FS80-C installation instructions

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Configuration guide

MicroNet

MicroNet SP1200A user manual

Ruijie

Ruijie RG-PF2920 Series Hardware installation and reference guide

Altinex

Altinex DA1914SX user guide

MiLAN

MiLAN MIL-SM2401M user guide

RJM

RJM MASTERMIND PBC/6X user manual

Atlas

Atlas MMK-KVM8 owner's manual

Installing the NetVanta 1524 Series Switch P/N 1200560L1

Quick Start Guide

Quick Start Guide, 61200560L1-13A, November 2004 Technical Support 1-888-4ADTRAN (1-888-423-8726) ©2004 ADTRAN, All Rights Reserved

For more detailed documentation, visit us online at www.adtran.com

1GETTING STARTED —ACCESSING THE GUI 4. The initial GUI screen appears.

Two configuration methods are available for your NetVanta Switch:

• Web-Based GUI (discussed in this section)

• AOS CLI (discussed on page 2)

You may access the web-based GUI from any web browser on your network by

following these steps:

1. Connect the switch to your PC using the ETH 0/0 port on the back of the

unit.

2. Set your PC to obtain an IP address automatically (or if using a fixed IP

address, set your PC to 10.10.20.2).

3. Enter the unit’s IP address in your browser address line (see example,

below). The default IP address is 10.10.20.1.

4. You will then be prompted for the username and password (the default

settings are admin and password).

Installing the NetVanta 1524 Series Switch P/N 1200560L1

Quick Start Guide

Quick Start Guide, 61200560L1-13A, November 2004 Technical Support 1-888-4ADTRAN (1-888-423-8726) ©2004 ADTRAN, All Rights Reserved

For more detailed documentation, visit us online at www.adtran.com

For more details on CLI access, refer to the AOS Command

Reference Guide on your ADTRAN OS System

Documentation CD (included in shipment).

2ACCESSING THE CLI

The web-based GUI lets you configure the main switch settings and provides

online guidance and explanations for each setting. However, using the AOS

command line interface (CLI) may be necessary for more advanced

configurations. Access the AOS CLI via the CONSOLE port or a Telnet session.

To establish a connection to the NetVanta 1524 Switch CONSOLE port, you

need the following items:

• VT100 terminal or PC (with VT100 terminal emulation software)

• Straight-through serial cable with a DB-9 (male) connector on one end and

the appropriate interface for your terminal or PC communication port on the

other end

1. Connect the DB-9 (male) connector of your serial cable to the CONSOLE

port on the rear panel of the switch.

2. Connect the other end of the serial cable to the terminal or PC.

3. Insert the connector of the provided power cord into the power interface on

the rear panel of the unit, and plug the cord into a standard electrical outlet.

4. Once the switch has powered up, open a VT100 terminal session using the

following settings: 9600 baud, 8 data bits, no parity bits, and 1 stop bit.

Press <Enter> to activate the ADTRAN operating system command line

interface (AOS CLI).