ADLINK Technology ROScube Pico BSP User manual

ADLINK Technology Inc. Condential.

2021-03-18

ROScube Pico BSP

Quick Start Guide

Document Generated Date : 2021-03-18

Document Released for: copyright

More information are available at ADLINK Technology Inc. Advanced Robotic Platform Group

ADLINK Technology Inc. Condential.

2021-03-18

Preface

protected by copyright. All rights are reserved. No part of this manual may be reproduced by

any mechanical, electronic, or other means in any form without prior written permission of

the manufacturer.

Disclaimer

The information in this document is subject to change without prior notice in order to

improve reliability, design, and function and does not represent a commitment on the part of

the manufacturer. In no event will the manufacturer be liable for direct, indirect, special,

incidental, or consequential damages arising out of the use or inability to use the product or

documentation, even if advised of the possibility of such damages.

Environmental Responsibility

ADLINK is committed to fulll its social responsibility to global environmental preservation

through compliance with the European Union's Restriction of Hazardous Substances (RoHS)

directive and Waste Electrical and Electronic Equipment (WEEE) directive. Environmental

protection is a top priority for ADLINK. We have enforced measures to ensure that our

products, manufacturing processes, components, and raw materials have as little impact on

the environment as possible. When products are at their end of life, our customers are

encouraged to dispose of them in accordance with the product disposal and/or recovery

programs prescribed by their nation or company.

Trademarks

Product names mentioned herein are used for identication purposes only and may be trade-

marks and/or registered trademarks of their respective companies.

ADLINK Technology Inc. Condential.

2021-03-18

TABLE OF CONTENTS

1 Revisions 1

1.1 BSP MFI Image Naming Rule ............................... 1

1.1.1 Model Name ................................... 1

1.1.2 FileSystem Type .................................. 1

1.1.3 L4T Version .................................... 2

1.1.4 Kernel Version .................................. 2

1.2 Release Note ....................................... 2

1.2.1 v1.0.0 ........................................ 2

1.2.2 v1.0.1 ........................................ 2

1.2.3 v1.0.2 ........................................ 2

1.2.4 v1.0.3 ........................................ 3

1.2.5 v1.0.4 ........................................ 3

1.2.6 v1.0.5 ........................................ 3

1.2.7 v1.0.6 ........................................ 3

1.2.8 L4T-32.4.3-Kernel-v1.0.7 ............................. 3

1.2.9 L4T-32.4.4-Kernel-v1.0.7 ............................. 4

2 Flashing ROScube Pico image 5

2.1 Prerequisite ........................................ 5

2.2 Board Level ROScube Pico Flashing Image ....................... 5

2.2.1 1. Set ROScube Pico into recovery mode ................... 5

2.2.2 2. Connect Host PC and ROScube Pico with micro usb cable. ........ 10

2.2.3 3. Prepare released image on Host PC .................... 11

2.3 System Level ROScube Pico Flashing Image ...................... 12

2.3.1 1. Set ROScube Pico into recovery mode ................... 12

2.3.2 2. Connect Host PC and ROScube Pico with micro usb cable. ........ 15

2.3.3 3. Prepare released image on Host PC .................... 16

2.4 Massive Flashing ...................................... 17

3 ROScube-Pico BSP Quick Start 18

3.1 Default User and Password ............................... 18

3.2 Check BSP Version .................................... 18

3.3 Hardware Monitor .................................... 18

4 Driver Package Usage 21

4.1 Customize System FileSystem .............................. 21

ADLINK Technology Inc. Condential.

2021-03-18

4.1.1 Prepare Filesystem ................................ 21

4.1.2 Modify Filesystem under Chroot ........................ 22

4.2 Flash System Image to Target Machine ......................... 23

4.3 Prepare a Bootable Disk ................................. 23

4.4 Boot from the Bootable Disk .............................. 24

5 Nvidia Jetson Software Stack 25

5.1 Version Table ....................................... 25

5.2 JetPack SDK Installation ................................. 25

5.3 JetPack SDK Example Usage ............................... 26

5.3.1 YOLO Object Detection ............................. 26

5.4 DeepStream SDK Installation .............................. 27

5.5 DeepStream SDK Example Usage ............................ 27

5.5.1 DeepStream Sample App ............................ 27

ADLINK Technology Inc. Condential.

2021-03-18

CHAPTER

ONE

REVISIONS

Document version: l4t-32.4.4-kernel-1.0.7

Compatible with ROScube Pico BSP version:

• L4T-32.4.3-Kernel-1.0.7

• L4T-32.4.4-Kernel-1.0.7

Author Revision

Chester Tseng L4T-32.4.3-Kernel-1.0.7

Chester Tseng L4T-32.4.4-Kernel-1.0.7

1.1 BSP MFI Image Naming Rule

ROScube-Pico BSP MFI le follows the nameing rule.

mfi_<model name>_<filesystem and distro type>_<L4T version>-Kernel-<kernel version>.

tbz2

For example: mfi_npn2_nvidia-ubuntu-rootfs-bionic_L4T-32-4-4-Kernel-1-0-7.tbz2.

1.1.1 Model Name

•npn1 - ROScube Pico with Nvidia Nano module.

•npn2 - ROScube Pico with Nvidia NX module.

1.1.2 FileSystem Type

•nvidia-sample-rootfs - Nvidia provided sample lesystem. It is based on Ubuntu 18.04

•custom-slim-rootfs-bionic - Custom rootfs build from Ubuntu base image 18.04.5. This

le type is much smaller.

•custom-slim-rootfs-focal - Custom rootfs build from Ubuntu base image 20.04.1. This

le type is much smaller.

ADLINK Technology Inc. Condential.

2021-03-18

ROScube Pico BSP, version Release l4t-32.4.4-kernel-1.0.7

1.1.3 L4T Version

The L4T version, for example 32.4.3 or 32.3.4

1.1.4 Kernel Version

ROScube-Pico BSP version, which is aect by kernel and device tree from ADLINK’s internal

engineering development.

1.2 Release Note

Version is based on BSP version (e.g: 1.0.x)

1.2.1 v1.0.0

• NPN2 (ROScube Pico NX)

–Bring up ROScube Pico Pinmux, generial I/Os.

–Add FAN and GPIO TachoMeter driver and device tree.

–Add CanBus device tree.

–Add Tegra GPIO device tree.

–Set up Tegra internal ethernet device tree.

–Set up USB lanes device tree settings.

1.2.2 v1.0.1

• NPN2 (ROScube Pico NX)

–Add board SD card device tree.

–Set up pinmux AUX to I2C on HDMI port.

–Add SX1509 PinCtrl Driver and device tree on 40 pin external header.

–Add USB OTG device tree and enable USB Gadget Linux Driver.

1.2.3 v1.0.2

• NPN2 (ROScube Pico NX)

–Fix LAN7800 LAN chip driver interrupt.

–Use Ubuntu Base as base image.

–Add extra LXDE desktop environment from Ubuntu base image.

ADLINK Technology Inc. Condential.

2021-03-18

ROScube Pico BSP, version Release l4t-32.4.4-kernel-1.0.7

1.2.4 v1.0.3

• NPN2 (ROScube Pico NX)

–Add ethtools, i2c-tools and pci-utils to custom slim rootfs.

–Lock kernel version, to provent from upgrading to Nvidia’ kernel.

1.2.5 v1.0.4

• NPN2 (ROScube Pico NX)

–Bring up audio subsystem.

1.2.6 v1.0.5

• NPN2 (ROscube Pico NX)

–Fix SPI channel number.

1.2.7 v1.0.6

• NPN1 (ROScube Pico Nano)

–First release ROScube Pico Nano

• NPN2 (ROScube Pico NX)

–Add OTA server for future use.

1.2.8 L4T-32.4.3-Kernel-v1.0.7

• NPN1 (ROScube Pico Nano)

–Drive all external GPIO and PWM pins to 0.

–Enable audio subsystem.

–Enable SD card. Set SD card detection pin into pull up when boot up.

–Add OTA server for future use.

–Add Intel AC9260 install script in BSP.

• NPN2 (ROScube Pico NX)

–Apply thermal table from thermal team suggested.

–Add alsa sound setting (Audio out + MIC in)

–Cong SD card detect pin default state to pull up.

–Drive all GPIO to 0 when boot up.

–Load mttcan kernel module when boot up.

–Add Intel AC9260 install script in BSP.

ADLINK Technology Inc. Condential.

2021-03-18

ROScube Pico BSP, version Release l4t-32.4.4-kernel-1.0.7

1.2.9 L4T-32.4.4-Kernel-v1.0.7

• NPN1 (ROScube Pico Nano)

–Upgrade to Nvidia L4T 32.4.4

• NPN2 (ROScube Pico AGX NX)

–Upgrade to Nvidia L4T 32.4.4

ADLINK Technology Inc. Condential.

2021-03-18

CHAPTER

TWO

FLASHING ROSCUBE PICO IMAGE

ROScube Pico provides 2 skus, which are

1. Board level ROScube Pico (Without chassis.)

2. System level ROScube Pico (With chassis.)

2.1 Prerequisite

Before ashing image to ROScube Pico, you should prepare the following items:

•Host PC with Ubuntu 18.04 or 20.04 operating system.

• A good quality micro-usb for connecting to ROScube Pico.

2.2 Board Level ROScube Pico Flashing Image

2.2.1 1. Set ROScube Pico into recovery mode

1. Connect power cable to ROScube Pico.

ADLINK Technology Inc. Condential.

2021-03-18

ROScube Pico BSP, version Release l4t-32.4.4-kernel-1.0.7

2. Power on ROScube Pico. (Press power button)

Table of contents

Other ADLINK Technology Computer Hardware manuals

ADLINK Technology

ADLINK Technology cPCI-7300A User manual

ADLINK Technology

ADLINK Technology CM5-P1000 User manual

ADLINK Technology

ADLINK Technology cPCI-3970 series User manual

ADLINK Technology

ADLINK Technology NuDAQ ACL-8216 User manual

ADLINK Technology

ADLINK Technology COM Express cExpress-BT2 User manual

ADLINK Technology

ADLINK Technology ROScube-I Series User manual

ADLINK Technology

ADLINK Technology VPX3000 Series User manual

ADLINK Technology

ADLINK Technology COM Express nanoX-TC User manual

ADLINK Technology

ADLINK Technology NuPRO-840 DV User manual

ADLINK Technology

ADLINK Technology NuDAQ DAQ-2500 Series User manual

ADLINK Technology

ADLINK Technology NuIPC cPCI-3700 User manual

ADLINK Technology

ADLINK Technology Q7-AL User manual

ADLINK Technology

ADLINK Technology arm AMPERE COM-HPC-ALT User manual

ADLINK Technology

ADLINK Technology Express-KL2 User manual

ADLINK Technology

ADLINK Technology VPX3010 Series User manual

ADLINK Technology

ADLINK Technology MXM-P1000 User manual

ADLINK Technology

ADLINK Technology cPCI-9116 User manual

ADLINK Technology

ADLINK Technology AmITX-CF-I User manual

ADLINK Technology

ADLINK Technology DMI-1210 User manual

ADLINK Technology

ADLINK Technology SMARC MODULE LEC-EL Owner's manual

ADLINK Technology

ADLINK Technology cPCI-A3525 Series User manual

ADLINK Technology

ADLINK Technology ACL -6128 User manual

ADLINK Technology

ADLINK Technology HDV62 User manual

ADLINK Technology

ADLINK Technology PCIe-ACC100 User manual

Popular Computer Hardware manuals by other brands

EMC2

EMC2 VNX Series Hardware Information Guide

Panasonic

Panasonic DV0PM20105 Operation manual

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 user manual

Gigabyte

Gigabyte B660M DS3H AX DDR4 user manual

Raidon

Raidon iT2300 Quick installation guide

National Instruments

National Instruments PXI-8186 user manual

Hauppauge

Hauppauge WinTV-HVR-2250 Quick installation guide

Kontron

Kontron CP6002 user guide

Manhattan

Manhattan 702843 user manual

Aphex

Aphex 230 instruction manual

AMD

AMD Phenom II Product data sheet

Intel

Intel NUC 12 Pro user guide

dbx

dbx Zone Pro 1260 user manual

Galaxy

Galaxy GHDX2-2430S-24F4D Installation and hardware reference manual

Intel

Intel AXXRMFBU4 Quick installation user's guide

Kontron

Kontron DIMM-PC/MD product manual

ST X-NUCLEO-SAFEA1B How to use

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 installation manual