ADLINK Technology CPCI-9116 User manual

cPCI-9116®/cPCI-9116R®

64 Ch, 16 bit, 250KS/s

Analog input Card

For 3U CompactPCI

User’s Guide

Recycled Paper

Manual Rev. 1.02: JUL 23, 2002

Part No: 50-15002-100

The information in this document is subject to change without prior notice in

order to improve reliability, design and function and does not represent a

commitment on the part of the manufacturer.

Innoeventwillthemanufacturerbeliablefordirect,indirect,special,incidental,

or consequential damages arising out of the use or inability to use the product

or documentation, even if advised of the possibility of such damages.

This document contains proprietary information protected by copyright. All

rights are reserved. No part of this manual may be reproduced by any

mechanical, electronic, or other means in any form without prior written

permission of the manufacturer.

Trademarks

NuDAQ, NuIPCare registered trademarks of ADLINK Technology Inc.

Other products names mentioned herein are used for identification purposes

only and may be trademarks and/or registered trademarks of their respective

companies.

Getting service from ADLINK

•Customer Satisfaction is the most important priority for ADLINK Tech Inc.

If you need any help or service, please contact us.

ADLINK Technology Inc.

Web Site http://www.adlinktech.com

Sales & Service

[email protected]

NuDAQ + USBDAQ [email protected]

Automation [email protected]

NuIPC [email protected]

Technical

Support

NuPRO / EBC [email protected]

TEL +886-2-82265877 FAX +886-2-82265717

Address 9F, No. 166, Jian Yi Road, Chungho City, Taipei, 235 Taiwan.

•Please email or FAX us of your detailed information for a prompt,

satisfactory and constant service.

Detailed Company Information

Company/Organization

Contact Person

E-mail Address

Address

Country

TEL FAX

Web Site

Questions

Product Model

Environment to Use

OS:

Computer Brand:

M/B: CPU:

Chipset: BIOS:

Video Card:

Network Interface Card:

Other:

Detail Description

Suggestions to ADLINK

Table of Contents•i

Table of Contents

Tables .....................................................................................iii

Figures .....................................................................................iv

How to Use This Guide .............................................................v

Chapter 1 Introduction..............................................................1

1.1 Features .............................................................................1

1.2 Applications ........................................................................2

1.3 Specifications......................................................................3

1.4 Software Support ................................................................5

1.4.1 Programming Library....................................................................5

1.4.2 PCIS-LVIEW: LabVIEW®Driver.................................................6

1.4.3 DAQBenchTM: ActiveX Controls..................................................6

Chapter 2 Installation................................................................7

2.1 What You Have...................................................................7

2.2 Unpacking ..........................................................................8

2.3 cPCI-9116 and cPCI-9116R Layout ......................................9

2.4 PCI Configuration.............................................................. 11

Chapter 3 Signal Connections...............................................12

3.1 Connectors and Pin Assignment ........................................ 12

3.2 Analog Input Signal Connection ......................................... 15

3.2.1 Types of signal sources .............................................................15

3.2.2 Input Configurations....................................................................15

3.3 Digital I/O Connection........................................................ 17

Chapter 4 Registers.................................................................18

4.1 I/O Port Address ............................................................... 18

4.2 Internal Timer/Counter Register ......................................... 20

4.3 General Purpose Timer/Counter Register ........................... 21

4.4 General Purpose Timer/Counter Control Register................ 22

4.5 A/D Data Registers............................................................ 23

ii •Table of Contents

4.6 Channel Gain Queue Register ........................................... 24

4.7 A/D & FIFO Control Register.............................................. 25

4.8 A/D & FIFO Status Register ............................................... 27

4.9 Digital I/O register ............................................................. 28

4.10 A/D Trigger Mode Register ................................................ 29

4.11 Interrupt Control Register................................................... 31

4.12 Interrupt Status Register.................................................... 33

Chapter 5 Operation Theory...................................................34

5.1 A/D Conversion................................................................. 34

5.1.1 A/D Conversion Procedure........................................................34

5.1.2 Software conversion with polling data transfer acquisition

mode (Software Polling).............................................................35

5.1.2.1 Specifying Channels, Gains, and input

configurations in the Channel Gain Queue..........36

5.1.3 Programmable scan acquisition mode....................................36

5.1.3.1 Scan Timing and Procedure...................................36

5.1.3.2 Specifying Channels, Gains, and input

configurations in the Channel Gain Queue..........38

5.1.3.3 Trigger Modes...........................................................39

5.1.4 A/D Data Transfer Modes..........................................................47

5.2 Digital Input and Output ..................................................... 48

5.3 General Purpose Timer/Counter Operation ......................... 49

Chapter 6 Software Utility & Calibration...............................51

6.1 Running 9116util.exe program ........................................... 51

6.2 Calibration........................................................................ 52

6.2.1 What do you need.......................................................................52

6.2.2 VR Assignment............................................................................53

6.2.3 A/D Adjustment............................................................................53

6.2.3.1 PGA offset Calibration.............................................54

6.2.3.2 Bipolar input Calibration..........................................54

6.2.3.3 Unipolar input Calibration........................................54

6.3 Functional Testing............................................................. 54

Warranty Policy........................................................................56

Tables •iii

Tables

Table 1. Legend of J1 Connector ......................................... 14

Table 2. I/O Port Address.................................................... 19

Table 3. Timer/Counter Register Address............................. 20

Table 4. General Purpose Timer/Counter Register................ 21

Table 5. General Purpose Timer/Counter Control Register .... 22

Table 6.GPTC0’s Mode selection........................................ 23

Table 7. A/D Data Registers ................................................ 23

Table 8. Channel Gain Queue Register................................ 24

Table 9. Gain Selection Bits ................................................ 24

Table 10. A/D & FIFO Control Register .................................. 25

Table 11. A/D & FIFO Status Register.................................... 27

Table 12. Digital I/O register (Read)....................................... 28

Table 13. Digital I/O register (Write) ....................................... 29

Table 14. A/D Trigger Mode Register..................................... 29

Table 15. Trigger Mode Selection Bits.................................... 30

Table 16. Interrupt Control Register ....................................... 31

Table 17. Interrupt Status Register ........................................ 33

Table 18. Functions of VRs ................................................... 53

iv •Figures

Figures

Figure 1: PCB Layout of the cPCI-9116...................................9

Figure 2: PCB Layout of cPCI-9116R and Rear I/O adaptor.... 10

Figure 3: J1 Pin Assignments ............................................... 13

Figure 4: Single-ended Mode and Floating sources................ 15

Figure 5: Ground-referenced source and differential input....... 16

Figure 6: Floating source and differential input ....................... 16

Figure 7: Ground-referenced source and User Common Mode

connections........................................................... 17

Figure 8: Digital I/O Connection ............................................ 17

Figure 9: Scan Timing .......................................................... 37

Figure 10: Pre-trigger (trigger occurs after M scans)................. 40

Figure 11: Pre-trigger (trigger with scan is in progress)............. 40

Figure 12: Pre-trigger with M_enable = 0................................. 41

Figure 13: Pre-trigger with M_enable = 1................................. 42

Figure 14: Middle trigger with M_enable = 1............................ 43

Figure 15: Middle trigger (trigger with scan is in progress)........ 44

Figure 16: Post trigger............................................................ 44

Figure 17: Delay trigger.......................................................... 45

Figure 18: Post trigger with re-trigger ...................................... 46

Figure 19: General-purpose Timer/Counter model ................... 49

Figure 20: Mode 0 Operation.................................................. 50

Figure 21: Mode 1 Operation.................................................. 50

Figure 22: CPCI-9116 Utility Main Screen ............................... 52

Figure 23: A/D Adjustment menu Screen................................. 53

Figure 24: cPCI-9116 Function Testing Screen........................ 55

How to Use This Guide•v

How to Use This Guide

This manual is designed to help you use the 9116 series. The manual

describes how to modify various settings on the card to meet your

requirements. It is divided into seven chapters:

Chapter1, “Introduction”, gives an overview of the product features,

applications, and specifications.

Chapter 2, “Installation”, describes how to install the 9116 series.

The layout of 9116 series is shown.

Chapter 3, “Signal Connection”, describes the connectors' pin

assignment and how to connect external signal and devices

to the9116 series card.

Chapter 4, “Registers”, describes the details of the registers and its

structure. This information is important for programmers who

want to control the hardware with low-level programming.

Chapter 5, “Operation theory”, describes the working theory of the

9116 series card. The A/D, DIO and timer/counter

functions are introduced. Also, some programming concepts

are specified.

Chapter 6, “Software Utility & Calibration”, describes how to run the

utility program included in the software CD and how to

calibrate the9116 series card for accurate measurements.

Other manuals for cPCI-9116

This manual suits for next models

Table of contents

Other ADLINK Technology Computer Hardware manuals

ADLINK Technology

ADLINK Technology COM Express Express-BD7 User manual

ADLINK Technology

ADLINK Technology HPERC-IBR-MC User manual

ADLINK Technology

ADLINK Technology PXES-2301 User manual

ADLINK Technology

ADLINK Technology nanoX-TCR User manual

ADLINK Technology

ADLINK Technology cPCI-6525 User manual

ADLINK Technology

ADLINK Technology HPERC-KBL-MC User manual

ADLINK Technology

ADLINK Technology nanoX-EL User manual

ADLINK Technology

ADLINK Technology HDV62 User manual

ADLINK Technology

ADLINK Technology EGX-TBT-A500 User manual

ADLINK Technology

ADLINK Technology cPCI-9116 User manual

ADLINK Technology

ADLINK Technology 10GbE BASE-T User manual

ADLINK Technology

ADLINK Technology GEME-4000 Series User manual

ADLINK Technology

ADLINK Technology EGX-MXM-A1000 User manual

ADLINK Technology

ADLINK Technology Express-BD74 User manual

ADLINK Technology

ADLINK Technology SMARC MODULE LEC-EL Owner's manual

ADLINK Technology

ADLINK Technology cPCI-7300A User manual

ADLINK Technology

ADLINK Technology EPS-4008 User manual

ADLINK Technology

ADLINK Technology COM Express Express-ID7 User manual

ADLINK Technology

ADLINK Technology NuDAQ PCI-9111DG User manual

ADLINK Technology

ADLINK Technology MXE-5401 User manual

ADLINK Technology

ADLINK Technology arm AMPERE COM-HPC-ALT User manual

ADLINK Technology

ADLINK Technology NuDAQ PCI-9222 User manual

ADLINK Technology

ADLINK Technology DLAP-211-JNX Series User manual

ADLINK Technology

ADLINK Technology AMSTX-CF Series User manual

Popular Computer Hardware manuals by other brands

EMC2

EMC2 VNX Series Hardware Information Guide

Panasonic

Panasonic DV0PM20105 Operation manual

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 user manual

Gigabyte

Gigabyte B660M DS3H AX DDR4 user manual

Raidon

Raidon iT2300 Quick installation guide

National Instruments

National Instruments PXI-8186 user manual

Hauppauge

Hauppauge WinTV-HVR-2250 Quick installation guide

Kontron

Kontron CP6002 user guide

Manhattan

Manhattan 702843 user manual

Aphex

Aphex 230 instruction manual

AMD

AMD Phenom II Product data sheet

Intel

Intel NUC 12 Pro user guide

dbx

dbx Zone Pro 1260 user manual

Galaxy

Galaxy GHDX2-2430S-24F4D Installation and hardware reference manual

Intel

Intel AXXRMFBU4 Quick installation user's guide

Kontron

Kontron DIMM-PC/MD product manual

ST X-NUCLEO-SAFEA1B How to use

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 installation manual