USER
’
S MANUAL
User ’ s Manual - 5 -
6.
6.
6.
6. Accessories&
Accessories&
Accessories&
Accessories& Details
Details
Details
Details
T
able 6.1 Accessories list
Item QTY Remarks
User
’
s Manual 1 English
Power Adaptor 1 DC12V,1A
half 9pin cable 1
9pin M-F cable 2 1 Male + 1 Female
T
able 6.2 Details of half 9Pin cable
Figure 6.2
Half
9pin cable
7.
7.
7.
7. Assembly
Assembly
Assembly
Assembly and
and
and
and debugging
debugging
debugging
debugging
Step 1 : access signals, if not display or display color is not correct, adjust the video source type items, adjusted to
the input video signal with the same type, color, only the normal display. (Available options are:
YUV
color, RGB
(D) digital TTL signals, RGB (A) mode may signal)
Step 2 :The system can automatically identify the signal.
If
you adjust the first step, the image color display is no
need to manually adjust the normal; if there distortions in the image, you need to manually adjust the
synchronization signal and the signal source to adjust to the same types of synchronization, you can normally
display.
Step 3 :
If
the screen shows elongated, and the overflow to the bottom of the screen, put the adjusted scanning:
Progressive Scan (Progressive); if the adjustment of the vertical position to a maximum, the image display is still
only half of the display, put the adjust the scanning mode: interlaced scan (Interlaced).
Step 4 : Adjust the horizontal position, horizontal size, vertical position, vertical size of the items, adjusted to the
satisfaction of the location.
Step 5 : input impedance, select the input source impedance than with select 750 in Europe, relatively light, if you
choose all 750 European white side, you should choose for the 75 euro.
Step 6 : the phase adjustment, if the image appears small waves up and down type
jitter,
can adjust the
consistency with the input signal phase.
Name Wire color Signal
A S ilver web Shield
B Black wire Ground(GND)
C White wire Vertical Frequency Rate(V)
D Orange wire Horizontal Frequ e ncy Rate (H)
E Blue wire Blue(B)
F Green wire Green(G)
G Red wire Red(R)
H Brown wire U ndefined(null)
