ActiveProducts ZE02 User manual
CAUTION
BEFORE OPERATING THIS UNIT, PLEASE READ THIS MANUAL THOROUGHLY AND
RETAIN IT FOR FUTURE REFERENCE.
IF YOU MUST STORE YOUR PRESSURE WASHER IN A PLACE WHERE TEMPERATURE IS BELOW
41ºF (5ºC), YOU MUST APPLY WINTERIZING PROCEDURE TO PROTECT IT. FAILURE TO WINTERIZE
THE UNIT MAY PERMANENTLY DAMAGE PUMP AND VOID THE WARRANTY. SEE PAGE 10 FOR
WINTERIZING PROCEDURE.
QUESTIONS, PROBLEMS, MISSING PARTS?
Before returning to your retailer, call our customer service at 1-866-924-7626
PURCHASE DATE: _______________ SERIAL#: ___________________________________
PLEASE KEEP THE ORIGINAL BOX, PACKAGING AND RECEIPT.
ZE02-ManualE-v1
SKU#: 39-8504-4
MODEL NO.: ZE02
TABLE OF CONTENTS
Technical Specications ....................................................................................................................... i
Precautions..........................................................................................................................................1
Safety Features and Electrical Power Information ..............................................................................2
Replacement Parts and Diagram ........................................................................................................3
Assembly and Operating Instructions..................................................................................................4
Using the Accessories .........................................................................................................................8
Working with Detergent .......................................................................................................................9
Shut Down and Clean-up ..................................................................................................................10
Taking a Break...................................................................................................................................10
Winterizing and Long-term Storage................................................................................................... 11
Maintaining Your Pressure Washer ...................................................................................................12
Troubleshooting.................................................................................................................................13
Warranty ............................................................................................................................................15
TECHNICAL SPECIFICATIONS
SPECIFICATIONS
Max. pressure: 1450PSI
Water ow rate: 1.3GPM
Power source requirement: 120V, 60HZ
Electrical cord: 23 ft
High-pressure hose: 20 ft
Rated current: 11A
Water supply: COLD TAP WATER
i.
IMPORTANT SAFETY INSTRUCTIONS - READ FIRST!
SAFETY WARNINGS
When using this product, basic precautions
should always be followed:
• Read all the instructions before using the product.
• High-pressure jets can be dangerous if subject to
misuse. The jet must not be directed at persons
or animals.
• Water spray must never be directed towards any
electric wiring, devices or directly towards the
pressure washer machine itself or fatal electric
shock may occur.
• To reduce the risk of injury, do not operate the
machine near children.
• Learn how to stop the machine and release pres-
sure quickly. Be thoroughly familiar with the controls.
• Stay alert—watch what you are doing.
• Wear safety goggles.
• For use with cold water supply only. Do not draw
other liquids.
• Do not use acids, solvents, or any other am-
mable material in this product. These products
can cause physical injuries to the operator and
irreversible damage to the machine.
• To reduce the risk of electrocution, keep all con-
nections dry and off the ground. Do not touch plug
with wet hands.
• The pressure washer should not be used in areas
where gas vapours may be present.
• An electric spark could cause an explosion or re.
• To minimize the amount of water getting into the
pressure washer, the unit should be placed as far
as possible from the cleaning site during operation.
• Avoid accidental starts. Shut power “OFF” before
connecting or disconnecting cord to electrical outlets.
• Do not operate the product when fatigued or
under the inuence of alcohol or drugs.
• Do not stand on unstable surfaces. Stand with
both feet balanced at all times.
• Prior to starting the pressure washer in cold
weather, be sure ice has not formed in any part of
the equipment.
• Never carry your pressure washer by the cord. Do
not pull on the cord to disconnect from the outlet.
• To allow free air circulation, the pressure washer
should not be covered during operation.
• The Trigger Gun Safety Lock prevents the trigger
from accidentally being engaged. This safety
feature does not lock trigger in the “ON” position.
• California Proposition 65: This product or its
power cord contains lead, a chemical known
to the State of California to cause cancer, birth
defects or other reproductive harm. Wash hands
after use
WARNINGS
• Do not use with ammable liquids and toxic chemicals.
• Injection Hazard: Equipment can cause serious injury if
the spray penetrates the skin.
• Do not point the gun at anyone or any part of the body.
In case of penetration seek medical aid immediately.
• This system is capable of producing 1450PSI. To
avoid rupture and injury, do not operate this pump with
components rated less than 1450PSI working pres-
sure (including but not limited to spray guns, hose and
hose connections).
• Before servicing, cleaning or removal of any parts, shut
“OFF” power and relieve pressure.
• Do not spray electrical apparatus and wiring. If connec-
tion is made to a portable water system, the system
shall be protected against backow.• Inspect cord
before using - Do not use if cord is damaged.
• Keep all connections dry and off the ground.
• Do not touch plug with wet hands.
• Do not use extension cord with the product.
1
Save These Instructions
In a double-insulation product, two sys-
tems of insulation are provided instead of
grounding. No grounding means is pro-
vided on a double-insulated product, nor
should a means for grounding be added to
the product. Servicing a double-insulated
product requires extreme care and knowl-
edge of the system, and should be done
only by qualified service personnel.
Replacement parts of a double-insulated
product must be identical to the parts
they replace. A double-insulated product
is marked with the words “DOUBLE
INSULATION” or “DOUBLE INSULATED”.
The symbol “ ” may also be marked on
the product.
2
SAFETY FEATURES AND ELECTRICAL POWER INFORMATION
The pressure washer is equipped with a stop de-
vice that will sense when the trigger on the gun is
released. It will open the power circuit to the motor
and cause the pressure washer motor to stop. Motor
will resume again when trigger is pulled.
Ground Fault Circuit Interrupter:
This pressure washer has a ground-fault circuit-in-
terrupter (GFCI) built into the plug of the power sup-
ply cord. This device provides additional protection
from the risk of shock. Should replacement of the
plug or cord become necessary, use only identical
replacement parts that include GFCI protection.
Extension Cords
If possible, do not use extension cords with this
product. However, if you must use one, observe all
the warnings and instructions listed below:
Use a sufcient gauge:
Maximum cable length: 50 ft = 14 AWG
• Use only extension cords that are intended for out-
door use. These extension cords are identied by
a marking “Acceptable for use with outdoor appli-
ances; store indoors while not in use.”
• Use only extension cords having an electrical rat-
ing not less than the rating of the product.
• Do not use damaged extension cords. Examine
extension cord before using and replace if dam-
aged. Do not abuse extension cord and do not
yank on any cord to disconnect.
• Keep cord away from heat and sharp edges.
• Always disconnect the extension cord from the re-
ceptacle before disconnecting the product from the
extension cord.
• To reduce the risk of electrocution, keep all con-
nections dry and off the ground. Do not touch plug
with wet hands.
WARNING
The pressure washer is also equipped with
a main power “ON/OFF” switch located on
the unit. It should always be moved to the
“OFF” position when the pressure washer
is not being used to prevent possible injury
or damage.
WARNING
Extension cords are not recommended
unless they are plugged into a ground fault
circuit-interrupter found in circuit boxes or
protected receptacles.
REPLACEMENT PARTS AND DIAGRAM
3
4
1
2
3
5
6
7
Parts List
Item No. Quantity Part Name Parts No.
1 1 Water lter ZE01-000-0003
2 1 Quick-connect coupling & inlet adaptor ZE01-050-0000
3 1 Gun assembly ZE01-090-0001
4 1 High-pressure hose ZE01-090-0002
5 1 Adjustable wand ZE01-090-0003
6 1 Turbo wand ZE01-090-0004
7 1 Gun/wand holder ZE01-000-0001
8 1 User manual ZE01-900-0002
9 1 Needle ZE01-900-0001
4
ASSEMBLY AND OPERTATING INSTRUCTIONS
Water Supply (Cold Water Only):
• Do not draw non-water liquids through the unit. For
use with cold water supply only.
• Water hose must be at least a 1/2 inch diameter.
• Flow rate of water supply must not fall below 2
GPM (gallons per minute).
• Flow rate can be determined by running the water
for one minute into an empty 5-gallon container.
• The water supply temperature must not exceed
104°F (40°C).
CAUTION
• Never use the pressure washer to draw
in water contaminated with solvents (e.g.
paint thinners, gasoline, oil, etc.).
• Dirt in the feed water will damage the unit.
To avoid this risk, we recommend checking
the water lter (located inside the water
inlet; to clean it out see Maintenance sec-
tion on page 11).
• Always prevent debris from being drawn
into the unit by using a clean water source
and an accessory water lter if required.
CAUTION
To prolong the life of the unit, it is recom-
mended to rest the unit 5 minutes after
every 30 minutes of use.
Assembly Time: 2 minutes / Tools Required: None
Surface Preparation
Before starting any cleaning task, it is important to inspect the area for objects which could create a hazard.
Remove from the workarea which could be tripped over, such as toys or outdoor furniture. Ensure that all
doors and windows are closed tight.
Step 1
Make sure that the ON/OFF switch is in the
“OFF” position.
Step 3
Insert the wand into spray gun, and twist 1/4 turn until rectangular tab appears.
Step 2
Separate the adaptor and quick-connect coupling.
Attach inlet adaptor to the machine’s inlet and attach
the quick-connect coupling onto the garden hose.
Fig. 1
Fig. 3
Fig. 2
ASSEMBLY AND OPERTATING INSTRUCTIONS
5
Step 4
Attach the high-pressure hose to the water outlet. Twist tightly to avoid leakage.
Fig. 4
Step 5
Attach garden hose to water supply and turn water on.
Step 6
Plug the unit into an outlet. Press “TEST”. Then press
“RESET” to assure proper connection to power.
Fig. 5 Fig. 6
6
ASSEMBLY AND OPERTATING INSTRUCTIONS
Step 7
Insert the wand (A or B) into spray gun, and twist 1/4 turn until rectangular tab appears.
Fig. 7
Fig. 8
Step 8
Start the pressure washer by turning ON/OFF switch to ON.
7
ASSEMBLY AND OPERTATING INSTRUCTIONS
Fig. 9
Adjusting The Spray
The adjustable spray nozzle can be adjusted
from fan to jet. The spray is adjusted from jet
to fan spray by turning the nozzle as shown
in Fig. 9.
CAUTION
Jet spray adjustment is very aggressive. Do
not adjust while spraying. We recommend
that for most cleaning applications a 20º
spray angle should be used to avoid dam-
age to the surface being sprayed.
CAUTION
To prolong the life of the unit, it is recom-
mended to rest the unit 5 minutes after
every 30 minutes of use.
8
USING THE ACCESSORIES
Fig. 10
Adjusting the spray
The adjustable spray nozzle can be adjusted from
fan to jet. The spray is adjusted from jet to fan
spray by turning the nozzle as shown in Fig. 10.
CAUTION
Jet spray adjustment is very aggressive. Do
not adjust while spraying. We recommend
that for most cleaning applications a 20º
spray angle should be used to avoid dam-
age to the surface being sprayed.
CAUTION
To prolong the life of the unit, it is recom-
mended to rest the unit 5 minutes after
every 30 minutes of use.
Table of contents
Other ActiveProducts Pressure Washer manuals
