ACTi C11W User manual
Wireless Cube Camera
Hardware Manual
C11W
Ver. 2016/01/08
www.acti.com
Hardware Manual
2
Table of Contents
Precautions 3
Safety Instructions ...........................................................................5
Introduction 6
List of Models....................................................................................6
Package Contents.............................................................................7
Physical Description ........................................................................8
Basic Connections 10
Connecting the Antenna ................................................................10
Connecting to Power......................................................................10
Connecting to a Wired Network..................................................... 11
Connecting Audio Output Device (optional)................................. 11
Installing the Memory Card (optional)........................................... 11
Installing the Camera 13
Mounting the Bracket.....................................................................13
Mounting the Camera..................................................................... 13
Adjusting the Viewing Angle and Focus.......................................14
Connecting for the First Time 15
Accessing the Camera 20
www.acti.com
Hardware Manual
3
Precautions
Read these instructions
You should read all the safety and operating instructions before using this product.
Heed all warnings
You must adhere to all the warnings on the product and in the instruction manual. Failure to
follow the safety instruction given may directly endanger people, cause damage to the system
or to other equipment.
Servicing
Do not attempt to service this video device yourself as opening or removing covers may
expose you to dangerous voltage or other hazards. Refer all servicing to qualified service
personnel.
Trademarks
All company names used in this manual are registered trademarks of their respective
companies.
Liability
Every reasonable care has been taken during the writing of this manual. Please inform your
local office if you find any inaccuracies or omissions. We cannot be held responsible for any
typographical or technical errors and reserve the right to make changes to the product and
manuals without prior notice.
www.acti.com
Hardware Manual
4
Federal Communications Commission Statement
This equipment has been tested and found to comply with the limits for a
class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications to the equipment that are not expressly approved by the
responsible party for compliance could void the user’s authority to operate the equipment.
European Community Compliance Statement
This product has been tested and found to comply with the limits for Class B
Information Technology Equipment according to European Standard EN 55022
and EN 55024. In a domestic environment, this product may cause radio interference in which
cause the user may be required to take adequate measures.
www.acti.com
Hardware Manual
5
Safety Instructions
Don’t open the housing of the product
Cleaning
Disconnect this video product from the power supply before cleaning.
Attachments
Do not use attachments not recommended by the video product manufacturer as they may
cause hazards.
Water and Moisture
Do not use this video product near water, for example, near a bathtub, washbowl, kitchen sink,
or laundry tub, in a wet basement, or near a swimming pool and the like.
Don’t use accessories not recommended by the manufacturer
Only install this device in a dry place protected from weather
Servicing
Do not attempt to service this video product yourself as opening or removing covers may
expose you to dangerous voltage or other hazards. Refer all servicing to qualified service
personnel.
Damage Requiring service
Disconnect this video product from the power supply immediately and refer servicing to
qualified service personnel under the following conditions.
1) When the power-supply cord or plug is damaged
2) If liquid has been spilled, or objects have fallen into the video product.
3) If the video product has been directly exposed to rain or water.
4) If the video product does not operate normally by following the operating Instructions in
this manual. Adjust only those controls that are covered by the instruction manual, as an
improper adjustment of other controls may result in damage, and will often require
extensive work by a qualified technician to restore the video product to its normal
operation.
Safety Check
Upon completion of any service or repairs to this video product, ask the service technician to
perform safety checks to determine if the video product is in proper operating condition.
www.acti.com
Hardware Manual
6
Introduction
List of Models
This hardware manual contains the following models:
C11W
1.3MP Wireless Cube with Basic WDR, Fixed lens
www.acti.com
Hardware Manual
7
Package Contents
Camera
Antenna
Power Adapter
Bracket
Mounting Screws
Quick Installation Guide
Warranty Card
www.acti.com
Hardware Manual
8
Physical Description
Item
Description
1
DC 12V Power
Connects to the power adapter to supply power to the camera.
2
Ethernet Port
Connects to a network using a standard Ethernet cable.
There are two (2) LED indicators on the Ethernet port that
indicate the camera status:
Power / Wireless LED (Amber)
oSolid LED: Power is on and camera is ready.
oFlashing LED: Wireless connection is in progress. The
flashing speed indicates the speed of the wireless
connection (slow or fast).
oSolid + Flashing LED (with undetermined pattern):
Indicates that the camera is searching for a wireless
network.
LAN LED (Green)
oSolid LED: No network connection via Ethernet.
oFlashing LED: Camera is connected to the network via
Ethernet.
3
Audio Output
Connects to audio output devices, such as a speaker, etc.
4
Built-in Microphone
Receives audio input.
5
Memory Card Slot
Insert a memory card into this slot for local recording purposes.
NOTE: Supports microSDHC only.
www.acti.com
Hardware Manual
9
Item
Description
6
Reset Button
Restores the camera to its factory default settings.
How to reset the camera?
1. Power off the camera.
2. Press and hold the RESET button as you power on the
camera.
3. Continuously press the RESET button until the Amber LED
lights up which will normally take about 30 seconds to
complete.
www.acti.com
Hardware Manual
10
Basic Connections
Connecting the Antenna
1. Screw the antenna to the antenna jack.
2. Turn the antenna to its vertical position.
Connecting to Power
Connect one end of the bundled power adapter to the camera DC 12V jack and the other end
to a power outlet.
Table of contents
Other ACTi Digital Camera manuals
