ACRONIS SNAP DEPLOY - User manual
Acronis Snap Deploy
Installation Guide
_____________________________________________________
Copyright © Acronis, Inc., 2000-2005. All rights reserved.
Windows and MS-DOS are registered trademarks of Microsoft Corporation.
All other trademarks and copyrights referred to are the property of their
respective owners.
Distribution of substantively modified versions of this document is prohibited
without the explicit permission of the copyright holder.
Distribution of this work or derivative work in any standard (paper) book
form for commercial purposes is prohibited unless prior permission is
obtained from the copyright holder.
DOCUMENTATION IS PROVIDED «AS IS» AND ALL EXPRESS OR
IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES,
INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE
DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE
HELD TO BE LEGALLY INVALID.
Acronis, Inc.
Homepage: http://www.acronis.com/
Technical questions: support@acronis.com
1Installing and using Acronis License Server
The Acronis License Server allows you to manage your Acronis enterprise
product licenses from a single location. The license server must be installed
before installing other Acronis components.
To install Acronis License Server:
1. Run AcronisSnapDeploy.exe
2. In the Install Menu, select the Install Acronis License Server
3. Read and accept the terms of the license agreement, then click Next
4. In the Choose setup type window, choose Typical
5. Click Proceed to install Acronis License Server
After purchasing product you will receive serial numbers for license
validation. It is recommended that you save these serials in a text file and
place it in the same folder, where Acronis License Server is installed.
You can import these serial numbers to the license server manually one at a
time or import them all at once from the saved file.
Acronis License Server includes a special command-line utility
LicenseServerCmdLine.exe which allows you to manage license information.
After the Acronis License Server installation LicenseServerCmdLine.exe will
be located in the installation folder, e. g. C:\Program Files\Acronis\License
Server.
To import serial numbers to the Acronis License Server:
1. After Acronis License Server installation run the
LicenseServerCmdLine.exe in the Windows Command Prompt
(cmd.exe).
2. If you want to import all serial numbers at once type following
command:
LicenseServerCmdLine --import-file [computername] [filename]
where:
computername – name of the computer with Acronis License Server
installed
filename – name of the saved file (*.txt or *.eml) with serial numbers
For example:
LicenseServerCmdLine --import-file MyServer serials.txt
3. If you want to import serial numbers manually type the following
command:
Acronis Snap Deploy 3
LicenseServerCmdLine --import [computername] [serial1]
[serial2] …
where:
computername – name of the computer with Acronis License Server
installed
serial – license serial number
For example:
LicenseServerCmdLine --import MyServer NL6ER-HDVVY-2ZJ27-
RRMMH-AH7Q7
1.1 LicenseServerCmdLine.exe commands reference
LicenseServerCmdLine.exe uses the following syntax:
LicenseServerCmdLine [option] [parameter1] [parameter2]
LicenseServerCmdLine.exe supports the following options:
--list
Displays the list of the License servers available in the local network
--status [server name or server IP-address]
Displays specified License Server status
--import [server name] [serial number]
Adds information about new license (new serial key). It is possible to
specify multiple serial numbers at once (space separated)
--import-file [server name] [filename]
Imports all license serial numbers from .txt or .eml file
--help
Displays help information
2Acronis Snap Deploy installation
You can install all the Acronis Snap Deploy components (Acronis Snap
Deploy Management Console, Acronis OS Deploy Server, Acronis PXE
Server, Acronis Snap Deploy Management Agent and Acronis License
Server) on one PC or each component on a separate computer. The
installation procedure may differ from the one described below,
depending on the component.
To install an Acronis Snap Deploy component:
1. Run AcronisSnapDeploy.exe
2. In the Install Menu, select the component that you are going to
install on a current PC. Available options are: Acronis Snap Deploy
4 Acronis Snap Deplo
y
Management Console, Acronis OS Deploy Server, Acronis PXE
Server, Acronis Snap Deploy Management Agent).
3. Read and accept the terms of the license agreement, then click Next.
4. In the Specify License Server window, you should specify the
License Server for license validation. It can be found automatically
on the local network or can be specified manually.
5. In the Choose setup type window, choose setup type:
Typical -- installs most common program features
(recommended for most users)
Custom -- allows users to choose program features to install
and select a location for setup (recommended for advanced
users)
Complete -- all program features will be installed (requires the
most disk space)
6. In the Select Administrators Options window, choose Install for
all users or Install for the currently logged-in user, then click Next.
7. Click Proceed to begin installation.
3Setting up security parameters for Acronis Snap
Deploy
Acronis Snap Deploy fully supports all security standards used in Windows.
If a remote PC has Windows NT/2000/XP OS installed, the Acronis Snap
Deploy Management Agent can be accessed according to security policy set up
in the local network. To have remote access to Acronis Snap Deploy
Management Agent, the user must be a part of the Administrators or Backup
operators groups.
If a remote PC has Windows 98/Me installed without its own security system,
you will need to provide a username and password during installation of the
Acronis Snap Deploy Management Agent that will be used by Acronis Snap
Deploy Management Console.
4Components modification
You can modify features of the installed components.
To customize component features,
1. Run AcronisSnapDeploy.exe
2. In the Install Menu, click on the component you are about to
customize.
Acronis Snap Deploy 5
3. Click Modify in the Modify, Repair or Remove Installation
window.
4. In the Custom Setup window, click on the feature:
Will be installed on a local hard drive -- selecting this
option installs the selected component feature on your
computer’s disk drive.
Entire feature will be installed on a local hard drive --
selecting this option installs the selected component feature, as
well as all features and subfeatures in the product tree below
the selection on your computer’s disk.
Entire feature will be unavailable -- selecting this option
removes the feature from your computer’s disk drive.
5. Click Next to apply changes.
5Repairing components
During maintenance periods, you may need to repair (or restore) Acronis
Snap Deploy components.
To repair a component:
1. Run AcronisSnapDeploy.exe
2. In the Install Menu, click on the component you want to repair.
3. Click Repair in the Modify, Repair or Remove Installation
window.
6Removing the program
You can remove any Acronis Snap Deploy component separately.
To remove a component from the Control Panel:
1. Run Control Panel.
2. Select Add or remove programs.
3. Click the Remove button on the Acronis Snap Deploy component.
4. Follow the instructions on the screen.
You can also remove Acronis Snap Deploy components in the Install Menu.
To remove a component from the Install Menu:
1. Run AcronisSnapDeploy.exe
2. In the Install Menu, click on the component that is about to be
removed.
3. Click Remove in the Modify, Repair or Remove Installation
window.
6 Acronis Snap Deplo
y
7Used ports and IP addresses
The Acronis OS Deploy Server and the Acronis Snap Deploy Management
Console use the following ports and IP addresses for remote operation:
UDP port: 9876
TCP port: 9876, if port number is already in use, a random
port is obtained
IPv4 multicast address: 239.255.219.45
IPv6 multicast address: FF05::fAA5:741E
Deploy Director Management Console UDP port: 9877, if
port number is already in use, a random port is obtained
The Acronis PXE server uses following ports and IP addresses:
UDP port: 67, 68, 69.
Broadcast address: 255.255.255.255
If you are using a firewall, you might have to set the appropriate access
options.
8Technical support
Users that have legally purchased and registered their copy of Acronis Snap
Deploy will receive free e-mail technical support from Acronis. If you have
problems installing or using the system that you cannot resolve with the help
of this guide and readme file, please e-mail technical support. You will also
need to provide the registration number of your Acronis Snap Deploy
supplied with this package.
Support URL: http://www.acronis.com/support/
Other manuals for SNAP DEPLOY -
1
Table of contents
Other ACRONIS Software manuals
ACRONIS
ACRONIS BACKUP AND RECOVERY 10 SERVER FOR LINUX - User manual
ACRONIS
ACRONIS RECOVERY - FOR MICROSOFT EXCHANGE User manual
ACRONIS
ACRONIS BACKUP AND RECOVERY 10 SERVER FOR LINUX - User manual
ACRONIS
ACRONIS BACKUP RECOVERY 10 ADVANCED SERVER VIRTUAL... User manual
ACRONIS
ACRONIS PRIVACY EXPERT SUITE 7.0 User manual
ACRONIS
ACRONIS SNAP DEPLOY 3 - FOR WORKSTATION User manual
ACRONIS
ACRONIS SNAP DEPLOY 3 - FOR WORKSTATION User manual
ACRONIS
ACRONIS BACKUP RECOVERY 10 SERVER FOR LINUX - COMMAND... Instruction Manual
ACRONIS
ACRONIS TRUE IMAGE CORPORATE WORKSTATION 9.1 User manual
ACRONIS
ACRONIS BACKUP RECOVERY 10 ADVANCED SERVER SBS... User manual
ACRONIS
ACRONIS DISK DIRECTOR SERVER 10 User manual
ACRONIS
ACRONIS RECOVERY - FOR MICROSOFT EXCHANGE User manual
ACRONIS
ACRONIS TRUE IMAGE ECHO - FOR LINUX User manual
ACRONIS
ACRONIS ACRONIS CHANNEL PARTNER PROGRAM User manual
ACRONIS
ACRONIS SNAP DEPLOY 2.0 - User manual
ACRONIS
ACRONIS TRUE IMAGE 8.0 User manual
ACRONIS
ACRONIS TRUE IMAGE - FOR MICROSOFT WINDOWS SMALL BUSINESS... User manual
ACRONIS
ACRONIS PRIVACY EXPERT CORPORATE - User manual
ACRONIS
ACRONIS PRIVACY EXPERT CORPORATE - User manual
ACRONIS
ACRONIS DNS-1250-04 User manual
