ACRONIS BACKUP AND RECOVERY 10 SERVER FOR LINUX

Installation Guide

Acronis® Backup & Recovery ™ 10

Server for Linux

Table of Contents

1. Before installation.................................................................................................. 3

1.1. Acronis Backup & Recovery 10 components ...................................................................... 3

1.1.1. Agent for Linux .............................................................................................................................................3

1.1.2. Bootable components and media builder .................................................................................................3

1.1.3. Management Console .................................................................................................................................4

1.2. Supported operating systems ............................................................................................. 4

1.3. Hardware requirements...................................................................................................... 4

1.4. License policy ...................................................................................................................... 5

2. Installation in Linux ................................................................................................ 5

2.1. Installation procedure......................................................................................................... 5

2.2. Command-line parameters ................................................................................................. 6

2.3. Uninstalling components .................................................................................................... 7

3. Upgrading from trial to full product version ............................................................ 8

3.1. Changing a license............................................................................................................... 8

3.2. Upgrading components for Linux........................................................................................ 8

4. Upgrading to stand-alone editions of Acronis Backup & Recovery 10 ....................... 9

4.1. Importing a task ................................................................................................................ 10

5. Index.................................................................................................................... 12

1. Before installation

This section answers questions that might arise before the product installation.

1.1. Acronis Backup & Recovery 10 components

This section contains a list of Acronis Backup & Recovery 10 components with a brief description of

their functionality.

Components for a managed machine (agents)

These are applications that perform data backup, recovery and other operations on the machines

managed with Acronis Backup & Recovery 10. Agents require a license to perform operations on each

managed machine. Agents have multiple features, or add-ons, that enable additional functionality

and so might require additional licenses.

With bootable media builder, you can create bootable media in order to use the agents and other

rescue utilities in a rescue environment. Availability of the agent add-ons in a rescue environment

depends on whether an add-on is installed on the machine where the media builder is working.

Console

The console provides Graphical User Interface and remote connection to the agents and other

Acronis Backup & Recovery 10 components.

1.1.1. Agent for Linux

This agent enables disk-level and file-level data protection under Linux.

Disk backup

Disk-level data protection is based on backing up either a disk or a volume file system as a whole,

along with all information necessary for the operating system to boot; or all the disk sectors using the

sector-by-sector approach (raw mode.) A backup that contains a copy of a disk or a volume in a

packaged form is called a disk (volume) backup or a disk (volume) image. It is possible to recover disks

or volumes as a whole from such backup, as well as individual folders or files.

File backup

File-level data protection is based on backing up files and directories residing on the machine where

the agent is installed or on a network share accessed using the smb or nfs protocol. Files can be

recovered to their original location or to another place. It is possible to recover all files and

directories that were backed up or select which of them to recover.

1.1.2. Bootable components and media builder

Bootable components of the agent enable operations with reboot, such as recovery of the volume

containing the currently active operating system. Once the operations are completed, the machine

boots into the operating system again. The bootable components are based on the Linux kernel. You

can choose not to install the bootable components and perform operations that require reboot using

bootable media.

Acronis Bootable Media Builder is a dedicated tool for creating bootable media containing the

bootable components. The media builder creates bootable media that represents volumes and

network in the Linux-like style (hda1, sdb2, smb://server/share).

1.1.3. Management Console

Acronis Backup & Recovery 10 Management Console is an administrative tool for local access to

Acronis Backup & Recovery 10 Agent for Linux. Remote connection to the agent is not possible.

1.2. Supported operating systems

Acronis Backup & Recovery 10 Management Console, Acronis Backup & Recovery 10

Agent for Linux

•Linux with kernel 2.4.18 or later (including 2.6.x kernels) and glibc 2.3.2 or later

•Various Linux distributions, including:

oRed Hat Enterprise Linux 4 and 5

oCentOS 4 and 5

oFedora 9 and 10

oUbuntu 8.10 (Intrepid Ibex) and 9.04 (Jaunty Jackalope)

oDebian 4 (Lenny) and 5 (Etch)

oSUSE Linux Enterprise Server 10

oopenSUSE

oAsianux

•x64 versions of the above Linux distributions and other Linux distributions are also supported.

The agent for Linux is in fact a 32-bit executable. For authentication, the agent uses system

libraries, 32-bit versions of which are not always installed by default with 64-bit distributions.

When using the agent on a 64-bit RedHat based distribution, such as RHEL, CentOS, Fedora or

Scientific Linux, make sure that the following 32-bit packages are installed in the system:

pam.i386

libselinux.i386

libsepol.i386

These packages should be available in the repository of your Linux distribution.

1.3. Hardware requirements

This section lists the minimum and recommended hardware requirements to install and run Acronis

Backup & Recovery 10 components.

Acronis Backup & Recovery 10 Management Console

Item Minimum requirements Recommended

Computer processor Modern processor, 800 MHz or faster

Itanium platforms are not supported

1 GHz 32-bit (x86) or 64-bit (x64)

processor

System memory 128 MB 512 MB or more

Screen resolution 800*600 pixels 1024*768 pixels or higher

Installation disk space 50 MB

Other hardware Mouse

CD-RW/ DVD-RW drive for bootable

media creation

Acronis Backup & Recovery 10 Agent for Linux

Item Minimum requirements Recommended

System memory 256 MB 512 MB or more

Installation disk space 100 MB

1.4. License policy

Acronis Backup & Recovery 10 licensing is based on the number of machines managed and protected

by the product. Acronis Backup & Recovery 10 Agent for Linux requires a license to perform

operations on each managed machine. The license key has to be entered during the agent

installation.

2. Installation in Linux

This section describes installation of Acronis Backup & Recovery 10 components on a machine

running Linux.

By using command-line parameters, you can choose between the interactive and unattended

installation modes.

2.1. Installation procedure

Preparation

You need the AcronisBackupRecoveryServerLinux.i686 installation file. Make sure that the file is

assigned the necessary access permissions to execute it.

Installation

1. Run the AcronisBackupRecoveryServerLinux.i686 installation file.

2. Read the terms of the license agreement, then select Next.

3. Select Enter the license key, and then type your Acronis Backup & Recovery 10 license key.

4. When prompted to select the edition to install, select Next.

5. Select the components that you want to install.

Note: You need Acronis Backup & Recovery 10 Upgrade Tool only if you are upgrading from Acronis True

Image Echo.

6. The setup program may ask you to compile the SnapAPI module for your Linux kernel. Click

Continue to compile the module now (recommended), or click Skip to compile it manually later.

Note: If the setup program could not compile the necessary module for your Linux distribution, or if you

have chosen to compile the module manually later, please refer to the file:

/usr/lib/Acronis/BackupAndRecovery/HOWTO.INSTALL

2.2. Command-line parameters

By using command-line parameters, you can choose between the interactive and unattended

installation modes.

When running the AcronisBackupRecoveryServerLinux.i686 installation file, you can specify one or

more of command-line parameters.

Examples

Example 1: Ubuntu system. The following command installs Acronis Backup & Recovery 10 Agent for

Linux on an Ubuntu system, which does not use RPM Package Manager:

./AcronisBackupRecoveryServerLinux.i686 -c -i BackupAndRecoveryAgent

Example 2: Unattended setup. The following command installs Acronis Backup & Recovery 10 Agent

for Linux and Acronis Backup & Recovery 10 Management Console in the unattended mode (without

asking for confirmations) and uses the license key 12345-7890-ABCDE:

./AcronisBackupRecoveryServerLinux.i686 -a -i

BackupAndRecoveryAgent,ManagementConsole -l 12345-67890-ABCDE

Parameters

-v or --version

Displays the product version and then exits.

-a or --auto

Performs installation in the so-called unattended setup mode, as opposed to the default

interactive mode.

The setup program will proceed without asking for interaction, such as typing the license key or

clicking the Next buttons. Specify the license key by using the -l parameter. Specify the

component to install by using the -i parameter.

If the SnapAPI module needs to be compiled and the compilation is possible, the setup program

will automatically compile the module; otherwise, it will skip the compilation.

-n or --nodeps

Ignores dependencies during an unattended setup. This option is effective only in the unattended

setup mode (see the -a parameter described previously).

-u or --uninstall

Uninstalls the component. You do not need to specify a license key.

-c or --norpm

Uses the installation file's own RPM Package Manager and not the system's package manager.

Specify this parameter when installing the component on a system which does not use RPM

Package Manager—such as an Ubuntu system.

-d or --debug

Puts verbose information to the installation log.

-i ComponentName or --id=ComponentName

Specifies the name of the component being installed:

For Acronis Backup & Recovery 10 Agent for Linux: BackupAndRecoveryAgent

For Acronis Backup & Recovery 10 Bootable Components and Media Builder:

BackupAndRecoveryBootableComponents

For Acronis Backup & Recovery 10 Management Console: ManagementConsole

For Acronis Backup & Recovery 10 Upgrade Tool: AcronisUpgradeTool

-l LicenseKey or --serial=LicenseKey

Applies only to Acronis Backup & Recovery 10 Agent for Linux and Acronis Media Builder.

Specifies the license key for the component.

-? or --help

Displays help and then exits.

--usage

Displays a brief usage message and then exits.

2.3. Uninstalling components

To uninstall Acronis Backup & Recovery 10

Do the following as the root user:

1. Run the following commands to uninstall the Acronis Backup & Recovery 10 components:

# cd /usr/lib/Acronis/BackupAndRecovery/uninstall

# ./uninstall

# cd /usr/lib/Acronis/BootableComponents/uninstall

# ./uninstall

# cd /usr/lib/Acronis/BackupAndRecoveryConsole/uninstall

# ./uninstall

# cd /usr/lib/Acronis/UpgradeTool/uninstall

# ./uninstall

2. Run the following command to delete the source files of the SnapAPI module:

# rm -rf /usr/src/snapapi*

3. Upgrading from trial to full product version

The trial key required at installation can be obtained on the Acronis Web site.

The Acronis Backup & Recovery 10 trial version has the following limitations for bootable media:

•The disk management functionality is available, but there is no option to commit the changes.

•Besides disk management, only the recovery functionality is available.

To upgrade from the trial version to the standard product you do not need to re-download the

software. When the trial period is over, the product GUI displays a notification requesting you to

specify a standard license key.

To specify the standard license key, use the Change License window in the management console, or

run the setup program and follow its instructions.

3.1. Changing a license

By changing the license, you switch to a different version or edition of the product. The following

table summarizes the available options.

Switching a license Why you may need it

trial > full Upgrade from trial to full product version

trial > trial different edition Define the edition that better fits your needs

trial > full different edition The edition you bought differs from the edition of the trial version

You can also enable Acronis Deduplication and Acronis Universal Restore by using additional licenses,

if these are available for the version and edition you are switching to.

Switching between advanced and standalone editions is not possible.

To change a license:

1. Click Help >Change license.

2. Enter the new license key.

3.2. Upgrading components for Linux

To specify the full license key, run the AcronisBackupRecoveryServerLinux.i686 installation file and

proceed as described in the Installation procedure (p. 5) section. When asked for the license key,

enter the full license key.

4. Upgrading to stand-alone editions of Acronis

Backup & Recovery 10

This section describes how to upgrade Acronis True Image Echo Server for Linux to Acronis Backup &

Recovery 10 Server for Linux.

Preparation

Before proceeding with the upgrade, make sure that:

•You have a license key for Acronis True Image Echo Server for Linux.

•You have an upgrade license key for Acronis Backup & Recovery 10 Server for Linux.

Installing components

1. Run the Acronis Backup & Recovery 10 setup file: AcronisBackupRecoveryServerLinux.i686

2. Specify the upgrade license key and the license key for Acronis True Image Echo Server for Linux.

3. Confirm deletion of the currently installed product components.

4. If you want to import Acronis True Image Echo backup tasks and validation tasks, make sure that

the Upgrade tool component is selected to install. If not, select it.

5. Follow the on-screen instructions. For details, see "Installation in Linux (p. 5)".

Result:

•The Acronis True Image Echo components are replaced with the Acronis Backup & Recovery 10

components.

Importing tasks

After you have upgraded the agent, you might want to import Acronis True Image Echo backup tasks

and validation tasks to Acronis Backup & Recovery 10. If you do not import them, these tasks will no

longer run. You can import the tasks at any time.

Note: The tasks that back up data to Acronis Backup Server or validate archives stored on it will not be imported

to Acronis Backup & Recovery 10.

To import the old tasks, use Acronis Backup & Recovery 10 Upgrade Tool:

1. Change the current directory to: /usr/lib/Acronis/UpgradeTool

2. Run the following command:

./UpgradeTool.sh Agent

Result:

•Tasks that were present in Acronis True Image Echo are converted to Acronis Backup & Recovery

10 tasks and appear in the Backup plans and tasks view.

•Each backup task's schedule, items to back up, and backup destination are the same as before,

but the task will create a new archive to perform further backups.

•Each backup task is part of a backup plan. You can edit the backup plan to change the task's

schedule or other parameters.

Importing old options

The upgrade tool enables you to import the default backup options, default restoration options,

notification options, and event tracing options of Acronis True Image Echo to the default backup and

recovery options of Acronis Backup & Recovery 10.

To import the old options:

1. Change the current directory to the one where the upgrade tool is installed.

2. Run the following command:

./UpgradeTool.sh Options

The old options are imported as follows:

•Notifications is imported as Notifications in both Default backup options and Default recovery

options.

•Event tracing is imported as Event tracing in both Default backup options and Default recovery

options.

•Archive splitting is imported as Backup splitting.

•In Media components, if Place Acronis One-Click Restore on media is the only check box

selected, it is imported as Acronis Bootable Agent and One-Click Restore.

•Validate backup archive upon its creation completion is not imported from Additional settings

in Default backup options or Default recovery options.

•In Default recovery options, Files to exclude from restoration, Files overwriting mode, and

Restore files and folders without restoring full path (in Additional settings) are not imported.

•Other options are imported as the corresponding options in Default backup options and Default

recovery options.

Using backup archives created with Acronis True Image Echo

After the upgrade to Acronis Backup & Recovery 10, you have the ability to recover data from

backups created with Acronis True Image Echo.

To facilitate access to these backups, you may want to create a personal vault where the backups are

located. For instructions on how to create a personal vault, see the "Actions on personal vaults"

section in the User's Guide.

A personal vault can store both Acronis True Image Echo archives and Acronis Backup & Recovery 10

archives. You can specify this vault as a destination for new backup plans.

4.1. Importing a task

Instead of importing the tasks from Acronis True Image Echo as a whole, you can use the upgrade

tool to import a particular backup or validation task.

Note: The tasks that back up data to Acronis Backup Server or validate archives stored on it cannot be imported.

Acronis True Image Echo stores each task as a .tis file. By default, these files are located in the

directory /etc/Acronis/TrueImage/Scripts.

Other manuals for BACKUP AND RECOVERY 10 SERVER FOR LINUX -

Table of contents

Other ACRONIS Software manuals

ACRONIS

ACRONIS DISK DIRECTOR SERVER 10 User manual

ACRONIS

ACRONIS DISK DIRECTOR SUITE 10 User manual

ACRONIS

ACRONIS UPGRADING TO ADVANCED EDITIONS OF BACKUP RECOVERY 10... User manual

ACRONIS

ACRONIS BACKUP AND RECOVERY 10 SERVER FOR LINUX - User manual

ACRONIS

ACRONIS BACKUP AND RECOVERY 10 SERVER FOR LINUX - User manual

ACRONIS

ACRONIS ACRONIS CHANNEL PARTNER PROGRAM User manual

ACRONIS

ACRONIS TRUEIMAGE DELUXE User manual

ACRONIS

ACRONIS ACRONIS TRUE IMAGE SOFTWARE DEVELOPMENT KIT Installation guide

ACRONIS

ACRONIS BACKUP AND RECOVERY 10 SERVER FOR LINUX - INSTALLATION UPDATE... User manual

ACRONIS

ACRONIS SNAP DEPLOY 2.0 - User manual

ACRONIS

ACRONIS DISK DIRECTOR SERVER 10 User manual

ACRONIS

ACRONIS TRUE IMAGE 9.0 - HOME User manual

ACRONIS

ACRONIS BACKUP RECOVERY 10 ADVANCED SERVER - User manual

ACRONIS

ACRONIS BACKUP RECOVERY 10 ADVANCED WORKSTATION - COMMAND... Instruction Manual

ACRONIS

ACRONIS DISK DIRECTOR SERVER 10 User manual

ACRONIS

ACRONIS TRUE IMAGE CORPORATE WORKSTATION 8.0 User manual

ACRONIS

ACRONIS RECOVERY - FOR MICROSOFT EXCHANGE User manual

ACRONIS

ACRONIS TRUE IMAGE 6.0 User manual

ACRONIS

ACRONIS BACKUP AND RECOVERY 10 ADVANCED SERVER VIRTUAL EDITION - COMMAND LINE REFERENCE UPDATE... Instruction Manual

ACRONIS

ACRONIS PRIVACY EXPERT CORPORATE - User manual

ACRONIS

ACRONIS TRUE IMAGE 9.1 - ENTERPRISE SERVER User manual

ACRONIS

ACRONIS BACKUP AND RECOVERY 10 SERVER FOR LINUX - INSTALLATION UPDATE... User manual

ACRONIS

ACRONIS TRUE IMAGE SERVER 7.0 User manual

ACRONIS

ACRONIS BACKUP AND RECOVERY 10 - UPGRADING TO STAND-ALONE... User manual

Popular Software manuals by other brands

COMPRO

COMPRO COMPROFM manual

Muratec

Muratec OFFICEBRIDGE ONLINE user guide

Oracle

Oracle Contact Center Anywhere 8.1 installation guide

Adobe

Adobe 65007312 - Photoshop Lightroom Programmer's guide

Avaya

Avaya NULL One-X for RIM Blackberry user guide

HP ProLiant BL420c user guide

PS Audio

PS Audio PowerPlay Programming manual

Brady

Brady LOCKOUT PRO 3.0 Administrator's guide

Avaya

Avaya Interaction Center user guide

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Guide book

Novell

Novell GROUPWISE 8 - INTERNET AGENT manual

Oracle

Oracle Application 9i Configuration guide

Acer

Acer RDM user guide

Canon

Canon Vixia HF21 instruction manual

Canon

Canon ZR950 instruction manual

Samsung

Samsung Auto Backup user manual

Polycom

Polycom Vortex EF2201 Application note

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c user manual