ACR Electronics RLB-37 2842 Installation instructions

PRODUCT SUPPORT MANUAL

GLOBALFIX™ PRO

406 MHz GPS EPIRB //

Model No.: RLB-37

Product No.: 2842, 2844

Y1-03-0242 Rev. D

ACR Electronics, Inc. // 5757 Ravenswood Road // Fort Lauderdale // FL // 33312-6645

Tel: +1 (954) 981-3333 // Fax: +1 (954) 983-5087 // www.acrartex.com

Y1-03-0242 Rev. D 1

CAUTION: Before proceeding to install, test or use your new ACR

Electronics’ product, please read this Product Support Manual in its

entirety.

If you have questions regarding the contents of the manual, please contact

our Technical Service Department at ACR Electronics, Inc., Telephone +1

(954) 981-3333. Please be ready to provide the technician with the page

number you wish to discuss. If you have a question that is not covered in

the manual, please visit our website and access the Frequently Asked

Questions (FAQs) section for further information or call our Technical

Service Department. The website address is www.acrartex.com. If in the

future you lose this manual, you may access and print a replacement on

the ACR website.

NOTE re: Applicable products

This manual supports all configurations of GlobalFix™ PRO/ RLB-37

beacons. In addition to the part numbers listed on the cover page, other

configurations of these products are available, thus you may have

purchased a product configuration with a somewhat different part number.

As long as the first four digits are the same as one of the two part numbers

on the cover, this manual is applicable.

OWNER

VESSEL

RADIO CALL SIGN

MMSI

EPIRB UIN

Y1-03-0242 Rev. D 2

Table of Contents

STEP ONE - REGISTERING YOUR BEACON ____________________________ 3

STEP TWO - HOW THE BEACON WORKS _____________________________ 6

STEP THREE - INSTALLING THE BEACON_____________________________ 15

STEP FOUR - MAINTAINING THE BEACON ___________________________ 19

APPENDIX A - USING AND TESTING THE GPS SYSTEMS__________________ 25

APPENDIX B - THE COSPAS-SARSAT SYSTEM__________________________ 26

APPENDIX C - TECHNICAL SPECIFICATIONS ___________________________ 27

APPENDIX D - WARRANTY, NOTICES _______________________________ 28

PLEASE READ ALL WARNINGS, CAUTIONS

AND NOTES CAREFULLY

Y1-03-0242 Rev. D 3

STEP ONE - REGISTERING YOUR BEACON

1. Why is registration important?

As the owner of this 406 MHz beacon, it is mandatory that you register it

with the EPIRB national authority of your country: It is the law. Please

note that all 406 MHz beacons are required to have their registration updated

every two years by the owner.

HOW REGISTRATION WORKS:

All 406 MHz beacons transmit a Unique Identifier Number (UIN) when

activated. This UIN is programmed into the beacon based on the country in

which the beacon is registered, thus authorities are able to determine which

country’s database will have your registration information. SAR forces will

have information as to who you are as the owner of the beacon, the name

and type of vessel that you have, your homeport, and who to contact that

might know of your current situation - but only if your beacon has been

properly registered. Valuable search and rescue resources are wasted every

year responding to false alarms, and registering your beacon helps to resolve

false alarms quickly.

Your unique ID code

programmed inside each EPIRB is

transmitted to Search and Rescue

(SAR). SAR forces use this code to pull

up your registration to find out valuable

information about who needs help.

YOUR RESCUE WILL

BE DELAYED IF YOUR

BEACON ISN’T PROPERLY

REGISTERED!

Y1-03-0242 Rev. D 4

2. What country should I register in?

which the beacon was programmed, typically the country where purchased,

regardless of where you do your boating.

The beacon must be reprogrammed if you, as the owner, move or the vessel

sails under the flag of a different country than the one for which the beacon

was previously programmed. To verify the country for which a beacon is

programmed, see the label with the UIN (Unique Identification Number) on

the back of the unit. Units that do not have a country specified on the UIN

label are programmed for the United States.

3. How do I register?

Registration in the United States

The national authority that accepts registrations in the United States is the

National Oceanic and Atmospheric Administration (NOAA).

Here are three ways to register:

1. The fastest and easiest way to register is online at

www.beaconregistration.noaa.gov/.

2. Faxing a registration is also acceptable. Fax the registration form to the

fax number on the top of the registration form.

NOTE: Do not confuse the registration form with the ACR Electronics

warranty card.

3. If online or fax registration is not available, mail the registration form with

the pre-addressed, postage paid envelope to:

SARSAT Beacon Registration NOAA

NSOF, E/SP053

4231 Suitland Road

Suitland, MD 20746

All registration forms will be entered in the 406 MHz beacon registration

database within 48 hours of receipt. The information you provide on the

registration form is used for rescue purposes only.

A confirmation letter, a copy of the actual registration and a proof-of-

registration decal will be mailed to you within two weeks. When you receive

these documents, please check the information carefully with the

existing label on the unit, and then affix the decal to your beacon in the

area marked “BEACON DECAL HERE.” If you do not receive confirmation

back from NOAA in the expected timeframe, call toll free (888) 212-7283 for

assistance.

Y1-03-0242 Rev. D 5

Registration outside of the United States

In countries other than the United States, 406 MHz beacons are registered

with that country’s national authority at the time of purchase. The sales agent

should have assisted you in filling out the forms and sending them to the

country’s national authority. Alternatively, many countries allow online

registration in the International 406 MHz Beacon Registration Database

(IBRD) at www.406registration.com.

To verify that the unit is properly programmed for your country, view the UIN

label on the back of the unit. In the event that the beacon is not programmed

for your country, the sales agent (if properly equipped) can reprogram the unit

for the correct country.

4. Do I need a radio license?

In the United States, you may or may not need to obtain or update a radio

station license. Check the FCC’s website at

http://wireless.fcc.gov/services/index.htm?job=licensing&id=ship_stations or

call toll-free (888) 225-5322 (CALLFCC) for the latest information.

Outside of the United States, contact your local authority for the

requirements.

Y1-03-0242 Rev. D 6

STEP TWO - HOW THE BEACON WORKS

1. How your beacon brings help

406 MHz beacons are a type of portable emergency equipment that transmits

a distress signal to search and rescue (SAR) organizations. The purpose of

these beacons is to aid SAR teams in tracking and locating ships or

individuals in jeopardy as rapidly as possible.

The 406 MHz frequency is a worldwide dedicated emergency frequency that

is detected by a special system of satellites called the Cospas-Sarsat system.

This satellite system was established by, and continues to be supported by,

its primary benefactors - the USA, Russia, Canada and France. The Cospas-

Sarsat system has saved over 24,800 lives - and counting - since its

inception. See Appendix G or the Cospas-Sarsat website for more

information about the system at www.cospas-sarsat.org.

When a 406 MHz beacon is activated, the digital distress message is sent to

Cospas-Sarsat satellites and, in turn, the distress message is relayed to SAR.

The distress message contains important information about the beacon and

its owner. Additional information about the beacon is accessed by SAR from

the beacon registration database. At the same time the 406 MHz signal is

activated, a 121.5 MHz signal is turned on. The 121.5 MHz signal is used by

SAR to home in on the beacon as they approach it.

The 406 MHz signal is detected by multiple satellites and from that

information the location of the beacon can be calculated. This data alone is

sufficient for SAR to find persons or ships in distress in a reasonable

timeframe. However, as a further enhancement, some beacons have a GPS

engine onboard. This feature allows the beacon to acquire current location

coordinates from an internal GPS receiver. The coordinates are added to the

ID of the unit, which is transmitted with the 406 signal. This enables the SAR

authorities to locate the beacon to an accuracy of 110 yards (100 m).

Y1-03-0242 Rev. D 7

2. Anatomy of your beacon

NOTE: When unpacking your beacon, it is recommended that you save the

original packaging for re-use when shipping the beacon for battery

replacement in the future.

// Activation switch with Witness Tab

The activation switch embodies a special, patented method of activating a

beacon. Refer to a subsequent section of this manual for how to activate the

beacon.

// Internal GPS engine

The internal GPS engine is located where it can most readily get a clear view

of the sky.

Antenna

StrobeLight GPSInterface

Red/Green LEDs

Internal GPS

Receiver

Digital Display

Screen

Manual Activation

Switch

Lanyard

Water Activation

Sensors

Grips

Battery

Housing

Y1-03-0242 Rev. D 8

Internal GPS

Receiver

Activation/Test

Switch

Red

LED

OFF/READY

Position

TEST

Position

ON/TRANSMITTING

Position

Top View

Switch Positions

Strobes

Antenna

Green

LED

Y1-03-0242 Rev. D 9

Spring

Release

knob

HydroFix™

Hydrostatic

Release Unit

(HRU)

Front cover hook

(detent)

Release

Latch

Antenna hook

Water Sensor

Deactivation Magnet

GPS Interface

Stowage Port

Category 2 –LowPro™3Bracket

Category 1 –SeaShelter™3Bracket

Front Cover

Release Tabs

Ejector

spring

Antenna

hook

This manual suits for next models

Table of contents

Other ACR Electronics GPS manuals

ACR Electronics

ACR Electronics NAUTICAST inland AIS User manual

ACR Electronics

ACR Electronics NAUTICAST SAR AIS - User manual

ACR Electronics

ACR Electronics NAUTICAST SAR AIS - User manual

ACR Electronics

ACR Electronics TerraFix 406 Installation instructions

ACR Electronics

ACR Electronics AQUAFIX 406 User manual

ACR Electronics

ACR Electronics NAUTICAST inland AIS User manual

ACR Electronics

ACR Electronics GLOBALWATCH UAIS - QUICK User manual

ACR Electronics

ACR Electronics AEROFIX 406 GPS I P-ELT - REV E Installation instructions

ACR Electronics

ACR Electronics AIS User manual

ACR Electronics

ACR Electronics RESQFIX 406 Installation instructions

ACR Electronics

ACR Electronics AIS Link MOB User manual

ACR Electronics

ACR Electronics LAS TAG User manual

ACR Electronics

ACR Electronics AEROFIX 406 GPSIOP-ELT Installation instructions

ACR Electronics

ACR Electronics NAUTICAST - REV M User manual

ACR Electronics

ACR Electronics RLB-38 Installation instructions

ACR Electronics

ACR Electronics RLB-33 2776 Installation instructions

ACR Electronics

ACR Electronics GLOBALWATCH UAIS - QUICK User manual

ACR Electronics

ACR Electronics MINI B2 CLASS B PERSONAL EPIRB Installation instructions

ACR Electronics

ACR Electronics AEROFIX 406 GPS I P-ELT - REV E Installation instructions

ACR Electronics

ACR Electronics VECTA 2 - REV A2 Installation instructions

ACR Electronics

ACR Electronics PLB-350C Installation instructions

ACR Electronics

ACR Electronics 406 EPIRB, NOAA Installation instructions

ACR Electronics

ACR Electronics GLOBAL FIX - REV G Installation instructions

ACR Electronics

ACR Electronics ResQLink PLB-375 User manual

Popular GPS manuals by other brands

Raven

Raven Cruizer II Manual

Hama

Hama 53118 Operating instruction

Garmin

Garmin SOUNDER 125 Owner's manual & reference

Garmin

Garmin DEZL 580 owner's manual

Jigabot

Jigabot EX quick start guide

Pointer

Pointer Cellocator CelloTrack XT LTE overview

Queclink

Queclink GV55LITE user manual

Voxson

Voxson Voxtrack GPS500 Quick user guide

Garmin

Garmin ECHOMAP PLUS owner's manual

Starcom Systems

Starcom Systems Kylos Compact user guide

Garmin

Garmin 15 H Series Technical specifications

Cobra

Cobra Marine MC 600Ci owner's manual

Cellocator

Cellocator CelloTrack T installation guide

Enfora

Enfora Mini-MT GSM2228UG001 user guide

Magellan

Magellan eXplorist 100 Reference manual

LTE

LTE G50B user manual

Garmin

Garmin DEZL OTR500 owner's manual

SkyGolf

SkyGolf SkyCaddie SG1 user guide