Acnodes PC 1150 User manual

PANEL PC 1150

All-in-One

15.1” Super Slim

PANEL PC

User’s Manual

Disclaimers

The information in this manual has been carefully checked and is believed to be

accurate. ACNODES Corp. assumes no responsibility for any infringements of

patents or other rights of third parties, which may result from its use.

ACNODES Corp. assumes no responsibility for any inaccuracies that may be

contained in this document. ACNODES Corp. makes no commitment to update or to

keep current the information contained in this manual.

ACNODES Corp. reserves the right to make improvements to this document and/or

product at any time and without notice.

No part of this document may be reproduced, stored in a retrieval system, or

transmitted, in any form or by any means, electronic, mechanical, photocopying,

recording, or otherwise, without the prior written permission of ACNODES Corp.

May 2002, Version A1

Safety Approvals

 CE Marking

 FCC Class A

FCC Compliance

This equipment has been tested and complies with the limits for a

Class-A digital device, pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference in a residential installation. If not installed and used in

accordance with proper instructions, this equipment might generate or

radiate radio frequency energy and cause harmful interference to

radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the

following measurers:

1. Reorient or relocate the receiving antenna.

2. Increase the separation between the equipment and

receiver.

3. Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

4. Consult the dealer or an experienced radio/TV

technician for help.

Shielded interface cables must be used in order to comply with

emission limits.

iii

Safety Precautions

Before getting started, read the following important cautions.

1. The PANEL PC 1150 does not come equipped with an

operating system. An operating system must be loaded

first before installing any software into the computer.

2. Be sure to ground yourself to prevent static charge when

installing the internal components. Use a grounding wrist

strap and place all electronic components in any

static-shielded devices. Most electronic components are

sensitive to static electrical charge.

3. Disconnect the power cord from the PANEL PC 1150

before making any installation. Be sure both the system

and the external devices are turned OFF. Sudden surge

of power could ruin sensitive components. Make sure the

PANEL PC 1150 is properly grounded.

4. The brightness of the flat panel display decreases with

usage. However, hours of use vary depending on the

application environment.

5. Turn OFF the system power before cleaning. Clean the

system using a cloth only. Do not spray any liquid cleaner

directly onto the screen. The PANEL PC 1150 may come

with or w/o a touch screen. Although the touch screen is

chemical resistant, it is recommended that you spray the

liquid cleaner on a cloth first before wiping the screen. In

case your system comes without the touch screen, you

must follow the same procedure and not spray any

cleaner on the flat panel directly.

6. Avoid using sharp objects to operate the touch screen.

Scratches on the touch screen may cause malfunction

or internal failure to the touch screen.

7. The flat panel display is not susceptible to shock or

vibration. When assembling the PANEL PC 1150, make

sure it is securely installed.

8. Do not open the system’s back cover. If opening the

cover for maintenance is a must, only a trained

technician is allowed to do so. Integrated circuits on

computer boards are sensitive to static electricity. To

avoid damaging chips from electrostatic discharge,

observe the following precautions:

 Before handling a board or integrated circuit, touch an

unpainted portion of the system unit chassis for a few

seconds. This will help to discharge any static electricity

on your body.

 When handling boards and components, wear a

wrist-grounding strap, available from most electronic

component stores.

Trademarks Acknowledgments

ACNODES is a trademark of ACNODES Corp.

IBM, PC/AT, PS/2, VGA are trademarks of International

Business Machines Corporation.

Intel and Pentium are trademarks of Intel Corporation.

MS-DOS, Microsoft C and Quick BASIC are trademarks of

Microsoft Corporation.

C&T is a trademark of Chips and Technologies, Inc.

SST is a trademark of Silicon Storage Technology, Inc.

UMC is a trademark of United Microelectronics

Corporation.

Other brand names and trademarks are the properties of

their respective owners.

This page does not contain any information.

Table of Contents

Chapter 1 Introduction ------------------------------- 1

1.1 General Description..........................................1

1.2 Specifications...................................................2

1.2.1 Core System for PANEL1150-370 SBC8360-based

system ..............................................................................2

1.2.2 I/O System................................................................2

1.2.3 Built-in Peripherals ...................................................3

1.2.4 System Specification ...............................................4

1.3 Dimensions.......................................................5

1.4 I/O Outlets ........................................................7

1.5 Utilities Supported............................................8

Chapter 2 System Configuration------------------ 9

2.1 System Configuration.......................................9

2.1.1 Front View ................................................................9

2.2 Panel Mount.................................................... 10

Chapter 3 System Installation --------------------11

3.1 CPU, HDD, and DRAM Installation .................. 12

3.2 CD-ROM and FDD Installation......................... 13

3.3 3 x Serial Ports ............................................... 15

3.4 Parallel Port.................................................... 15

3.5 VGA ................................................................ 16

3.6 Ethernet.......................................................... 16

3.7 Digital I/Os...................................................... 17

3.8 Keyboard ........................................................ 17

3.9 Riser Card Assembly ...................................... 18

3.10 PS/2 Mouse..................................................... 19

3.11 System O/S and Software Installation ............ 20

Appendix A Power Supply Specifications ----21

Specifications .......................................................... 21

International Standards ........................................... 22

Table of Contents vii

This page does not contain any information.

viii

PANEL1150-370 15.1” All-in-One PANEL PC User’s Manual

C h a p t e r 1

Introduction

This chapter contains the general information and the detailed

specifications of the PANEL PC 1150. Chapter 1 includes the following

sections:

 General Description

 System Specification

 Dimensions

 I/O Outlets

 Utilities Supported

1.1 General Description

The PANEL PC 1150 super slim industrial PANEL PC is mainly

designed for industrial automation and some space-constricted

embedded applications. For some space-concerned industries, a

traditional PC with a separate main system, display monitor and

keyboard is simply not integrated enough.

Ruggedly designed, the PANEL PC 1150 is 100% IBM PC/AT

compatible and it integrates super I/Os, VGA, 15.1” TFT touch screen,

Ethernet, and packs special industrial features like watchdog timer,

CMOS double backup, all in a single system. The full PC functionality

coupled with its industrial-grade construction easily tailors the system

for any embedded applications and allows the system to endure

continuous operation in any hostile industrial environments where

stability and reliability are a must. Common applications of the PANEL

PC 1150 include tooling machine, POI terminal, stand-alone KIOSK,

medical instrument, mobile communication device and banking

system - to name just a few.

1150 is virtually the ultimate one-step solution for your space-limited

applications.

Introduction 1

PANEL1150-370 15.1” All-in-One PANEL PC User’s Manual

1.2 Specifications

1.2.1 Core System for PANEL PC 1150

 CPU: Intel Celeron 300 up to 733 MHz;

Intel Pentium III 500 up to 850 MHz

 System Chipset: Intel 440BX Core Logic Controller

 BIOS: Award BIOS, Y2K compliant

2Mbit Flash ROM, DMI, Plug and Play

 System Memory: One 168-pin DIMM (PC-100)

Maximum SDRAM of up to 256MB

(buffered)/128MB (unbuffered)

 L2 Cache: Integrated in CPU

 Real Time Clock: Dallas 12887 or STM48T86PC1 or latest

product

 Watchdog Timer: System reset or Non-Mask Interrupt

software programmable Time interval and

jumper selectable;

64 levels, 0.5~8 / 5~80 / 50~800 / 100~1600

seconds

1.2.2 I/O System

 Standard I/O:

− 4 x serial ports with power;

3 x RS-232, 1 x

RS-232/422/485 jumper

selectable

− 1 x parallel port,

SPP/EPP/ECP

− 1 x External FDD Interface

− 1 x Internal HDD Interface

− 1 x Keyboard Interface

− 1 x PS/2 Mouse Interface

− 1 x External IDE Interface

− 2 x USB Ports

− 1 x IrDA

− 1 x Speaker-out

 Digital I/O: Input x 4, Output x 4

 Ethernet:

− 32-bit Plug & Play Fast Ethernet Controller

− RJ-45 connector

Introduction

Other manuals for PC 1150

Table of contents

Other Acnodes Touch Panel manuals

Acnodes

Acnodes PANEL PC 1000 User manual

Acnodes

Acnodes FPC-8057 User manual

Acnodes

Acnodes 17" TFT Expandable Intel Core 2 Duo Industrial Panel PC with 2 PCI PC... User manual

Acnodes

Acnodes PCA80 Series User manual

Acnodes

Acnodes PC 5171 User manual

Acnodes

Acnodes PC 5152 User manual

Acnodes

Acnodes PCW81 Series User manual

Acnodes

Acnodes PC 2150 User manual

Acnodes

Acnodes PC9 A Series User manual

Acnodes

Acnodes FPC 8089 User manual

Acnodes

Acnodes PC 2150 User manual

Acnodes

Acnodes FPC 875X User manual

Acnodes

Acnodes FPC 8077 User manual

Acnodes

Acnodes PCM8010 User manual

Acnodes

Acnodes PC 5170 User manual

Acnodes

Acnodes PC 6170 User manual

Acnodes

Acnodes PANEL PC 1000 User manual

Acnodes

Acnodes PCM8011 User manual

Acnodes

Acnodes PC 8175 User manual

Acnodes

Acnodes PC 8120 User manual

Acnodes

Acnodes PC 6150 User manual

Acnodes

Acnodes PCH3782 User manual

Acnodes

Acnodes PC8719 User manual

Acnodes

Acnodes PC 3500 User manual

Popular Touch Panel manuals by other brands

FlowLine

FlowLine Data loop quick start

ALPEX

ALPEX AEx-8 P Series user manual

Ltech

Ltech E5S manual

Harman

Harman AMX MODERO S MSD-701-L2 quick start guide

AIS

AIS IP10IA99 series user guide

IBASE Technology

IBASE Technology ASTUT-152-RE1S user manual

YASKAWA

YASKAWA TP 610C manual

B&R

B&R Power Panel C Series user manual

Beijer Electronics

Beijer Electronics X2 control Hardware and installation manual

AXIOMTEK

AXIOMTEK GOT321W-521 user manual

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Operation manual

Qomo

Qomo QIT1386 user manual

DFI

DFI KS104-CD user manual

AMX

AMX AXP-PPC Dimensional drawing

Sartorius

Sartorius X3 PR 5410 operating manual

AMX

AMX Modero X Series quick start guide

Advantech

Advantech TPC-30 Series user manual

B&R Industries

B&R Industries MAPPC900-ENG user manual