ACME LED-835B User manual

LED-835B

User Manual

1 -

In order to reduce the damage and risk while operation, please carefully

read the user manual before use the fixture.

A．Safety Instructions

Please read the instruction carefully which including important information

about the installation, operation and maintenance.

Please keep this User Manual for future consultation. If you sell the unit to

another user, be sure that they also receive this instruction booklet.

Unpack and check carefully there is no transportation damage before using

the unit.

Before operating, ensure that the voltage and frequency of power supply

match the power requirements of the unit.

It’s important to ground the yellow/green conductor to earth in order to

avoid electric shock.

The unit is for indoor use only and use only in a dry location.

The unit must be installed in a location with adequate ventilation, at least

50cm from adjacent surfaces. Be sure that no ventilation slots are blocked.

Disconnect mains power before maintenance or servicing.

Make sure there are not flammable materials close to the unit while

operating as it is fire hazard.

In the event of serious operating problem, stop using the unit immediately.

Never try to repair the unit by yourself. Repair carried out by unskilled

people can lead to damage or malfunction. Please contact the nearest

authorized technical assistance center and always use the same type

spare parts.

Do not touch any wire during operation as high voltage might be causing

electric shock.

2 -

B．Warning

To prevent or reduce the risk of electrical shock or fire, do not expose the

unit to rain or moisture.

The housing, the lenses, or the ultraviolet filter must be replaced if they are

visibly damaged.

Don’t look directly while the fixture is on.

C．Caution

There are no user serviceable parts inside the unit. Do not open the housing

or attempt any repairs yourself. In the unlikely event your unit may require

service, please contact your nearest dealer.

D．Installation

The unit should be mounted via its screw holes on the bracket. Always

ensure that the unit is firmly fixed to avoid vibration and slipping while

operating. And make sure that the structure to which you are attaching the unit

is secure and is able to support 10kgs of the unit’s weight.

E．Troubleshooting

Following are a few common problems that may occur during operation.

Here are some suggestions for easy troubleshooting:

A. The unit does not work, no light and the fan does not work

1. Check the connection of power and main fuse.

2. Measure the mains voltage on the main connector.

B. No response to the sound

1. Check microphone to see if it is good by tapping the microphone

3 -

F．Technical Specifications

Input Voltage ：AC 230V/ 50Hz

LED：46pcs (R：16pcs G：15pcs B：15pcs)

Dimension：429×172×157 mm

Innovation, Quality, Performance

Table of contents

Other ACME Lighting Equipment manuals

Popular Lighting Equipment manuals by other brands

Brizo

Brizo 8SP-MU-4 manual

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 installation instructions

IKEA

IKEA BJÖRKSPIREA manual

Laserworld

Laserworld Evolution Series ES-400RGB manual

Alien

Alien RG STAR user manual

EuroLite

EuroLite LED B-40 user manual

Qazqa

Qazqa Suplux SL 3 Black 103062 instruction manual

Commercial Electric

Commercial Electric 54568141 Use and care guide

CREE LIGHTING

CREE LIGHTING 304 Series installation instructions

Goobay

Goobay 49867 user manual

ECOMAN ITALIA

ECOMAN ITALIA LED T8 instruction manual

Alkalite

Alkalite Krypton KT-81 user manual

Clas Ohlson

Clas Ohlson GU10 manual

DTS

DTS DELTA 10 F user manual

ring

ring Solar Steplight manual

One Stop Gardens

One Stop Gardens 57696 Owner's manual & safety instructions

Chauvet DJ

Chauvet DJ COREpar UV120 ILS user manual

SIREM

SIREM Swimeo A2 instructions