Acer PD726W User manual
5... English
Introduction
Product Features
This product is an XGA single chip 0.7” DLPTM projector. Out-
standing features include:
u
TrueXGA,1024x768addressablepixels
uSingle chip DLPTM technology
u NTSC3.58/NTSC4.43/PAL/SECAMandHDTV
compatible(480i/p,576i/p,720p,1080i)
uDual resolution support:
-15:9(1280x768)
-16:9(1280x720)
u UserfriendlyandpowerfulAcerEmpoweringkey
including:AcereViewManagement,AcereTimer
Management and Acer eOpening Management.
uFull function remote control with laser pointer
uAdvanced digital keystone correction and high quality
full screen image re-scaling
uUser friendly control panel
uSXGA,XGAcompressionandVGA,SVGAre-sizing
u SupportHDMIinputwithHDMI1.0compliant
uSupports High bandwidth Digital Content Protection
–HDCP1.1onHDMIinput
u
Mac compatible
9... English
Introduction
Connection Ports
1. USBConnector
2. HDMIConnector
3. DVIInputConnector
4. VGAInputConnector(PCAnalogSignal)
5. ComponentVideoInputConnector
6. S-VideoInputConnector
7. RS232Connector
8. KensingtonTM Lock Port
9. PowerSocket
10. VGAOutputConnector(MonitorLoop-throughOutputConnec-
tor)
11. AudioInputConnector
12. CompositeVideoInputConnectort
Below items are for PD726W only:
13. Lan(RJ45Portfor10/100MEthernet)
14. AudioOutputConnector
15. ResetButton
16. StatusIndicator
17. Antenna
For PD726W
only
1234
11
812
9
10
65
7
16 15 14 13
17
12
English ...
Installation
1......................................................................................................................Power Cord
2......................................................................................................................... Lan Cable
3...................................................................................................AudioCableJack/Jack
4............................................................................................................................Antenna
(for PD726W only, need to attach the antenna by user)
Internet
Connecting the Projector
For Wireless function
4
3
1
2
20
English ...
User Controls
Color
Press “Color” to adjust the color temperature of image.
Contrast
Press “Contrast” to control the difference between the
lightestand darkest parts of the picture.
VGA
Press“VGA”tochangesourcetoVGA-Inconnector.Thiscon-
nectorsupportsAnalogRGB,YPbPr(480p/576p/720p/1080i),
YCbCr(480i/576i)andRGBsync.
Component
Press “Component” to change source to component connec
tor.ThisconnectorsupportsYPbPr(480p/576p/720p/1080i)
andYCbCr(480i/576i)
Video
Press“Video”tochangesourcetoCompositeVideo
source.
S-Video
Press“S-Video”to change source toS-Videosource.
DVI
Press“DVI”tochangesourcetoDVIconnector.This
connector
supportsDigitalRGB,AnalogRGB,YPbPr(480p/576p/720p/
1080i),YCbCr(480i/576i)andHDCPsignal.
HDMI
Press “HDMI” to change source to HDMI. This connector can
support to carry all standard and high-definition consumer
electronics video formats.
24
English ...
User Controls
Image
(Computer / Video
Mode)
H. Keystone (Horizontal Keystone)
Press the or buttontoadjustimagedistortionhorizontally
and makes a squarer image.
V. Keystone (Vertical Keystone)
Press the or button to adjust image distortion vertically
and makes a squarer image.
Aspect Ratio
Use this function to choose your desired aspect ratio.
Full:Resizeimagetofitfullscreen.
16:9:Theinputsourcewillbescaledtofitthewidthofthescreen
and narrowed the height to make the displayed image
becomes16:9ratio.
4:3:Theinputsourcewillbescaledtofittheprojectionscreen
andbecomes4:3ratio.
1:1:Keepimageatthecenterofscreenwithitsoriginalpixel
resolution without scaling.
Projection
Front-Desktop
The factory default setting.
Front-Ceiling
Whenyouselectthisfunction,theprojectorturnsthe
image upside down for ceiling-mounted projection.
Rear-Desktop
Whenyouselectthisfunction,theprojectorreversesthe
image so you can project behind a translucent screen.
Rear-Ceiling
Whenyouselectthisfunction,theprojectorreverses
andturnstheimageupsidedownatsametime.Youcan
project from behind a translucent screen with ceiling
mounted projection.
25 ... English
User Controls
H. Position (Horizontal Position)
Press the to move the image left.
Press the to move the image right.
V. Position (Vertical Position)
Press the to move the image down.
Press the to move the image up.
Frequency
“Frequency”changes the display data frequency to match the
frequency of your computer’s graphic card. If you experience a
verticalflickeringbar,usethisfunctiontomakeanadjustment.
Tracking
“Tracking”synchronizesthesignaltimingofthedisplaywiththe
graphiccard.Ifyouexperienceanunstableorflickeringimage,use
this function to correct it.
Sharpness
Adjusts the sharpness of the image.
Press the to decrease the sharpness.
Press the to increase the sharpness.
Signal Type
Press the or buttontochangesourcetoRGB,
YPbProrYCbCr.
“H.Position”,“V.
Position”,“Frequency”
and “ Tracking” func-
tions are not supported
underDVIandVideo
mode.
“Sharpness” functions
is not supported under
DVIandComputer
mode.
“Signal Type” is only
available for Com-
ponent,HDMIand
SCART signal sources.
Image
(Computer / Video
Mode)
28
English ...
User Controls
Lamp Reminding
Choose this function to show or to hide warning message when the
changing lamp message is displayed. The message will show up 30
hours before end of life.
Security
Press to start “Security” setting. If the “Security” function is
enabled,yourmustenter“AdministratorPassword”firstbefore
Security setting.
Security
This projector provides an excellent security function
for the administrator to manage the usage of the
projector.
Select “On” to enable the security function. User
have to enter password depending on the " Security
Mode" . Please refer to "User Password" section for
details.
Select “Off” then user can switch on the projector
without password.
Oncethesecurityfunctionisenabled,theprojector
will request user to enter password when switch on
the projector or enter security setting. Both “User
Password” and “Administrator Password” can be
accepted for this dialogue.
Management
(Computer / Video
Mode)
30
English ...
User Controls
The projector provide two options of "Security Mode".
Select “Request password only after plugging
powercord”,theprojectwillrequestusertoinput
password only for the first time plugging on power
cord of the projector.
Select “Always request password while projector
turnson”,userhavetoinputpasswordeverytime
when switching on the projector.
Administrator Password
“Administrator Password” can be accepted by
both“EnterAdministratorPassword”and“Enter
Password” dialogues.
Press to change “Administrator Password”.
Projector will request “Administrator Password”
before changing password.
The factory default of “Administrator Password” is
“1234”.
Management
(Computer / Video
Mode)
31 ... English
User Controls
If user or administrator forgot “User Password” or
even “Administrator Password”, do the following to
retrieve the “Administrator Password”:
1.Press“MENU”formorethan4secondswhen
anyof“EnterPassword”or“EnterAdministrator
Password” dialogue is currently displayed.
2.Write down the “Unlock ID” and contact with
Acer service center. They will give you new
Administrator Password according to the Unlock
ID.
3.Once the new “Administrator Password” retrieved
fromAcerhasbeenloggedintotheprojector,old
“Administrator Password” will be replaced by the
new password.
Reset
Pressthebuttonafterchoosing“Yes”toreturnthedisplay
parameters on all menus to the factory default settings.
Management
(Computer / Video
Mode)
35 ... English
Wireless projection
Introduction
This section will introduce wireless projection function for this projector. The
wireless projection function is only available for the model which is equipped
with integrated Acer Wireless Presentation Gateway (WPG) module. Acer WPG
enables multiple users to connect to an Acer projector wirelessly. This eliminates
theneedtoplugandunplugcables,enablingmoreefcientuseofmeetingtime,
especially when there is more than one presenter in a meeting.
To perform wireless projection, you have to change the input source type to
"Wireless" by pressing the "Wireless" button on the remote control or the
"Source" button on the control panel or remote control.
System Requirements:
-Operatingsystem:Windows®2000orWindows®XP
-CPU:Intel®Pentium®IIIat750MHzorequivalentwith128MBofRAM
-WirelessLAN:IEEE802.11b/genabled
-InternetBrowser:InternetExplorer5.0orabove
I/O Interface:
No. Item Description
1 Antenna connector For attaching the external antenna.
2 StatusLED Indicates the WPG’s status.
3 Reset button
A quick press on the the Reset button will reset
the WPG without changing any user's settings.
PressandholdResetbuttonformorethan4
seconds to reset the WPG to its factory default
settings.
4 Audio-out jack For outputting audio signals received
wirelessly from the PC.
5 RJ-45Ethernetjack For connecting the WPG to the Internet via a
LAN.
345
12
Other manuals for PD726W
1
This manual suits for next models
1
Table of contents
Other Acer Projector manuals
Acer
Acer X Series User manual
Acer
Acer C250i User manual
Acer
Acer H6510BD User manual
Acer
Acer PD-113P Owner's manual
Acer
Acer P1203PB Series User manual
Acer
Acer P5260E Series User manual
Acer
Acer H5360BD Series User manual
Acer
Acer P7203 Series User manual
Acer
Acer HV750 Series User manual
Acer
Acer PD726 Series User manual
Acer
Acer X1527H User manual
Acer
Acer XD1270D User manual
Acer
Acer PalmPro 7763PS User manual
Acer
Acer P7280 User manual
Acer
Acer P1165E Series User manual
Acer
Acer P1163 User manual
Acer
Acer P1386W User manual
Acer
Acer H6815BD Series User manual
Acer
Acer P5205 Series User manual
Acer
Acer P7505 Series User manual
