Acer AT2219MF User manual
Acer LCD TV
Important safety instructions...............................................3
Disposal instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Your LCD TV overview .......................................................... 5
Front and side panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Rear panel view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Connecting devices ...............................................................9
Wall mount preparation / removing the base . . . . . . . . . . . . . . . . . . 9
Basic connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Enjoying analog and digital TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Connecting external audio/video devices ......................... 12
Connecting a DVD, VCR, STB or audio/video equipment . . . . . . . . 12
Connecting a camera, camcorder or game console . . . . . . . . . . . . . 13
Connecting a PC or notebook computer . . . . . . . . . . . . . . . . . . . . . 14
Selecting the input source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Channel controls..................................................................15
Channel list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Favourite channel list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Electronic programme guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
OSD navigation ................................................................... 18
Navigating the OSD with the remote control . . . . . . . . . . . . . . . . . 18
Adjusting the OSD settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
OSD Menus .......................................................................... 21
Picture settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Audio settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Channel management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Advanced . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Troubleshooting..................................................................27
There is no picture or sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Picture is not clear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Picture is too dark, too light or tinted . . . . . . . . . . . . . . . . . . . . . . . 27
Remote control does not work . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Product specifications ......................................................... 28
Contents
AT1919MF
AT1926ML
AT2219MF
AT2226ML
User Guide
2
© 2011 All Rights Reserved
Acer LCD TV User Guide
First issue: 01/2011
Model number: __________________________________
Serial number: ___________________________________
Date of purchase: ________________________________
Place of purchase: ________________________________
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC.
DVB is a registered trademark of the DVB Project.
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol
are trademarks of Dolby Laboratories.
3
English
Important safety instructions
Read these instructions carefully. Please put them somewhere safe for future reference.
1. Only use attachments/accessories specified by the manufacturer.
2. Use only with the cart, stand, tripod, bracket, or table specified by
the manufacturer, or sold with the apparatus. When a cart is used,
use caution when moving the cart/ apparatus combination to avoid
injury from tip-over.
3. Unplug this apparatus during lightning storms or when unused for
long periods of time.
4. Do not install this equipment in a confined space such a book case
or similar unit.
5. No naked flame sources, such as lighted candles, should be placed on the apparatus.
6. If the remote control will not to be used for a long time, remove the batteries. Use the
remote control carefully. Do not drop the remote control on the floor. Keep it away
from moisture, direct sunlight, and high temperatures.
7. Used or discharged batteries must be properly disposed of or recycled in compliance
with all applicable laws. For detailed information, contact your local solid waste
disposal authority.
8. Follow all warnings and instructions marked on the product.
9. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or
aerosol cleaners. Use a damp cloth for cleaning.
10.Do not use this product near water.
11.Do not place this product on an unstable cart, stand or table. The product may fall,
sustaining serious damage.
12.Slots and openings are provided for ventilation; to ensure reliable operation of the
product and to protect it from overheating, these openings must not be blocked or
covered. The openings should never be blocked by placing the product on a bed, sofa,
rug or other similar surface. This product should never be placed near or over a
radiator or heat register or in a built-in installation unless proper ventilation is
provided.
13.This product should be operated from the type of power indicated on the marking
label. If you are not sure of the type of power available, consult your dealer or local
power company.
14.Do not allow anything to rest on the power cord. Do not locate this product where the
cord will be stepped on.
15.If an extension cord is used with this product, make sure that the total ampere rating
of the equipment plugged into the extension cord does not exceed the extension cord
ampere rating. Also, make sure that the total rating of all products plugged into the
wall outlet does not exceed the fuse rating.
16.Never push objects of any kind into this product through cabinet slots as they may
touch dangerous voltage points or short-out parts, which could result in a fire or
electric shock. Never spill liquid of any kind on the product.
17.Do not attempt to service this product yourself, as opening or removing covers may
expose you to dangerous voltage points or other risks. Refer all servicing to qualified
service personnel.
18.Unplug this product from the wall outlet and refer servicing to qualified service
personnel under the following conditions:
a When the power cord or plug is damaged or frayed.
b If liquid has been spilled into the product.
c If the product has been exposed to rain or water.
4
English
d If the product does not operate normally when the operating instructions are
followed. Adjust only those controls that are covered by the operating
instructions.Improper adjustment of other controls could result in damage;
extensive work by a qualified technician might then be required to restore the
product to normal condition.
e If the product has been dropped or the case has been damaged.
f If the product exhibits a distinct change in performance, indicating a need for
service.
19.Use only the proper type of power supply cord set (provided in your accessories box)
for this unit. Always disconnect the power cord from the wall outlet before servicing
or disassembling this equipment.
20.Do not overload an electrical AC outlet, power strip, or convenience receptical. The
overall system load must not exceed 80% of the branch circuit rating. If power strips
are used, the load should not exceed 80% of the power strip input rating.
21.Some products are equipped with a three-wire electrical grounding-type plug that has
a third pin for grounding. This plug only fits into a grounded electrical outlet. This is a
safety feature. Make sure the AC outlet is properly grounded. Do not defeat the safety
purpose of the grounding-type plug by trying to insert it into a non-grounded outlet.
If you cannot insert the plug into the outlet, contact your electrician to replace the
obsolete outlet.
22.Do not use this LCD TV in the workplace in accordance with BildscharbV, and maintain
ample distance from it when watching. Watching a big-screen TV too close can cause
eyestrain.
23.This TV is designed for home entertainment purposes only. Make sure there is
sufficient distance between you and the TV when you are viewing content to avoid
harming your eyes.
The grounding pin is an important safety feature. It is possible to receive an electric
shock from a system that is not properly grounded.
The grounding pin also provides good immunity ability against unexpected noise that
interferes performance of this product and is produced by other nearby electrical
devices.
Disposal instructions
Do not throw this electronic device into the rubbish bin / container when
discarding. To minimize pollution and ensure utmost protection of the
global environment, please recycle.
For more information regarding WEEE, please refer to
http://global.acer.com/about/environmental.htm.
Соответствует сертификатам,
обязательным вРФ
Compliant with Russian regulatory certification.
5
English
Your LCD TV overview
Front and side panels
No. Item Description
1 Common interface Insert a common interface module here. A module
may be required by certain channels (e.g. some
pay-per-view channels).
2 Earphone Insert a 3.5 mm headphone jack here.
3 Power LED Indicates the power status of the TV.
4 Remote control receiver Receives signals from the remote control.
5 Power button Press to turn the TV ON and OFF.
6 Volume down When the OSD is on, functions the same as the Left
arrow.
7 Volume up When the OSD is on, functions the same as the
Right arrow.
8 Channel down When the OSD is on, functions the same as the
Down arrow.
9 Channel up When the OSD is on, functions the same as the Up
arrow.
10 Menu key Turns the OSD menu ON and OFF.
11 Source (Input) key Press to change input source. When the OSD is on,
press this button to confirm selection.
6
English
Rear panel view
* Tuner could support analog, digital and mixed signal.
No. Item
1AC-in
2Serviceport
3 HDMI
4 VGA-in + PC Audio-in
5 SPDIF out
6 AV in-S-video, CVBS, Audio L/R
7 AV in-COMPONENT + Audio L/R
8SCART
9Tuner*
7
English
Remote control
General keys
No. Item Description
1 POWER Press to turn your TV on/off.
2 DISPLAY Press to display or change input/channel information
(dependent on input/source type).
3 GUIDE Press to launch Electronic Programme Guide (EPG) mode
(Digital TV mode only).
See “Electronic programme guide” on page 16.
4 SOURCE Press to select correct source/input mode.
See “Selecting the input source” on page 14.
5 WIDE Press to toggle scaling mode between 4:3, 16:9 and
Letterbox 1, 2, 3 modes.
6 MPX Press to display and select the audio signal.
7 MENU Press to open or close the Menu.
8 Back/CANCEL Press to back to previous Menu.
9 Directional keys On certain models, the left and right directional keys also
function as rewind and fast-forward keys when viewing
multimedia files.
OK
DISPLAY GUIDE
WIDESOURCE
MENU
MUTE
TELETEXT SUBTITLE
BACK
CANCEL
FAV
MPX
13
2
45
6
7
11
8
12
10
9
13 14
16 17
15
8
English
Teletext keys
* only for certain models
10 OK/ENTER/
CH LIST
ENTER: Press to confirm channel number selection.
CH LIST: Press to launch the channel list.
See “Channel list” on page 15.
11 MUTE Press to toggle audio on and off.
12 FAV Press to display the favorite channel list.
13 VOL (+/-) Press to increase or decrease the volume.
14 CH (up/down) Press to sequentially select the TV channel.
15 Number keys Press 0 - 9 on the remote control to select a channel.
16 TELETEXT/MIX Press to switch from TV/AV to Teletext mode. Press to
overlay teletext page on the TV image.
17 SUBTITLE Press to view subtitles on the screen.
No. Item Description
1 Colour buttons (R/
G/Y/B)
Operates corresponding button on the teletext page.
2 INDEX Press to go to the index page.
3 SIZE Press once to zoom teletext page to 2X. Press again to
resume.
4 HOLD Press to pause the current teletext page.
5 REVEAL Press to reveal hidden teletext information.
No. Item Description
,1'(; 6,=( +2/' 5(9($/
9
English
Connecting devices
Wall mount preparation / removing the base
Caution: Disassemble the base carefully otherwise the plastic parts and/or TV body
may be damaged.
Basic connections
Connecting the power cord
1. Connect the AC cord into the AC input on the
back of the set.
2. Connect the plug to the wall outlet as shown.
AT1919MF/AT1926ML AT2219MF/AT2226ML
1. Remove the base.
2. Remove the three screws from inside the stand.
3. Assemble the wall mount following the instructions included with the wall mount.
2
1
2
1
10
English
Setting up the remote control
1. Open the cover on the back of the remote unit.
2. Insert two AA batteries (supplied) to match the polarity indicated inside the battery
compartment.
Enjoying analog and digital TV
Connecting an antenna/cable
Connect the antenna cable to the appropriate antenna terminal on the back of the TV set
as shown below.
Getting started watching your TV
1. Power
a Turn on the power switch beneath the screen.
b Press the power button or channel up/down button on the remote control.
2. Installation Guide
The first time you switch on the TV, you will be asked to select the language and scan
for channels.
Press the OK key to begin the setup process.
Tuner
1
1
2
3
4
Other manuals for AT2219MF
1
This manual suits for next models
3
Table of contents
Other Acer LCD TV manuals
