Instruction
1. Install the antennas as shown in the picture.
2. Use the cold shoe mount adapter to install the
CineView HE onto the camera or camera cage.
3. Use an NP-F970/F750/F550 battery, DC
source or USB-C to power the CineView HE.
4. Connect camera HDMI to CineView HE.
How to Install
Power On/Off
2
Power On: Press the power on/off button
Power Off: Hold the power on/off button
for 2 seconds.
Group Setting
3
1. CineView HE has a group setting knob on each
transmitter and receiver. If the transmitter and
receiver are set to the same group, they will be
paired and connected automatically; otherwise,
they will not be paired and connected.
2. If you want to connect multiple receivers (up to 4)
to one transmitter at the same time, simply set all
receivers and transmitter to the same group.
3. If you want to use more than one group for
monitoring under the same application, you need
to differentiate the settings of each group.
Note:
1. If you change the grouping settings after the product has been powered on,
a reboot is required for the changes to take effect.
2. After changing the group setting, you need to reconnect the transmitter and
receiver at close range, otherwise it may fail to pair and connect.
5
