AC Air Technology T1 User manual
Instruction Manual MODEL: T1 / T1C / T1X / T1X-C TRACKS
World’s First Portable, Remote-Control Aircraft Tugs
Contents
1. Components
2. Installation Guide
2-1. Installation
2-2. Warranty
1. Components
Tug
Track
Track Installation Tools
Part # 22844
Retainer Clip Tool
2. Installation Guide
2-1. Installation
1. Remove battery cover and motor cover by removing 9 torx screws. Note: Some
models need plug jack retaining nut removed to remove motor cover.
Motor Cover
Battery Cover
Torx Screws
2. Remove all 4 plastic track guards by removing several Torx Screws.
Torx Screws
Plastic Track Guards
3. Loosen track tension screw on track you are removing.
4. Remove one of the outter retainer clips from the track you are removing. Note:
The retaining clip can be cut off with side cutters and discarded.
Track Tension Screw
Retainer Clip
5. Remove the track pin from the track and then remove the entire track from the
tug.
6. Put the new track on the tug with the break at the front of the rail as shown.
Track Pin
Break in track
7. Put track install tool (part # 22844) on outside and inside track pins adjacent to
break. Note: You will may need to hold the tools in place on the pins.
8. Rotate motor by hand to move the break in the track back to straight part of rail
while holding tools on the pins. Warning: Do not turn on the power at any point of
this process.
Track Install Tools
Rotate motor here
Move track this direction
9. Line-up track holes and insert the track pin thru to other side.
10. Insert new retainer clip on the end of the track pin. Use the retainer clip tool and
tap it with a hammer while pressing on other end of the track pin with something
to keep the pin from moving. Note: The retainer clip must be installed with the
small teeth angled outward.
Install Tools
Track Holes
Track Pin
Retainer Clip Tool
Retainer Clip
11. Re-install plastic track guards and motor cover and battery cover.
2-2. Warranty
LIMITED WARRANTY
Your new AC Air Technology Tug is warranted to the original purchaser (only) for one full year
from the date of purchase to be free from factory defects in material and workmanship. During
this 12-month period, AC Air Technology will repair or replace, at our discretion, the defective
component determined by AC Air Technology to be defective.
This warranty does not apply to damage or defect resulting from mis-use, improper applica-
tion, commercial use, or attempted repair by “non-AC Air Technology” service staff. The war-
ranty does not cover shipping or handling cost or any incidental or consequential damage.
Batteries and tracks are not covered by warranty.
DAMAGE LIMITS
AC Air Technology shall not be liable for any damage, indirect or consequential, loss of prots
or commercial or production loss, or other special loss or damage in any way connected with
this product regardless whether such claim is based on warranty, in contract, negligence, or
strict liability. In no event shall the liability of AC Air Technology exceed the individual price of
the product on which liability is asserted. AC Air Technology has no control of the set up, ap-
plication, use, modication, or misuse of this product, thus no liability shall be assumed or ac-
cepted for any resulting damage or injury. By the rst act of use, set up or assembly, the user
in using the product accepts all resulting liability. Failure to operate this product in a safe and
responsible manner can result in damage or injury, both to the user as well as to others, the
product, or property. This product is not a toy and is NOT intended to be used by children with
out adult supervision. It is essential to read the entire manual and warranty/liability information
prior to rst use/application/installation of this product to operate correctly and avoid damage/
injury,
In cases where the purchaser or user are not prepared to accept liability associated with the
use of this product, the user or purchaser is advised to return the unused product immediately
in unused condition to the place of purchase.
RETURN PROCEDURE
When sending equipment in for requested warranty service, please include a note describing
the problems/concerns with the equipment. You must include your name, address, telephone
number and email for prompt service. To request warranty service, a copy of your original
sales receipt must be included. Warranty is approved and preformed at the discretion of AC Air
Technology service department. You are required to pay all postage, shipping and insurance
charges.
Other manuals for T1
1
This manual suits for next models
3
Table of contents
