ABB Relion REB500 Instructions for use
a
=
I
;
D
e
-
RELION® REB500
Bay protection functions REB500
Version 8.3 IEC
Application manual
a
=
I
;
D
e
-
Document ID: 1MRK 505 403-UEN
Issued: October 2020
Revision: C
Product version: 8.3
© 2019 - 2020 Hitachi Power Grids. All rights reserved
Copyright
This document and parts thereof must not be reproduced or copied without written
permission from Hitachi Power Grids, and the contents thereof must not be imparted to a
third party, nor used for any unauthorized purpose.
The software and hardware described in this document is furnished under a license and may
be used or disclosed only in accordance with the terms of such license.
This product includes software developed by the OpenSSL Project for use in the OpenSSL
Toolkit (http://www.openssl.org/). This product includes cryptographic software written/
developed by: Eric Young ([email protected]) and Tim Hudson([email protected]).
Trademarks
ABB and Relion are registered trademarks of the ABB Group. All other brand or product names
mentioned in this document may be trademarks or registered trademarks of their respective
holders.
Warranty
Please inquire about the terms of warranty from your nearest Hitachi Power Grids
representative.
Disclaimer
The data, examples and diagrams in this manual are included solely for the concept or product
description and are not to be deemed as a statement of guaranteed properties. All persons
responsible for applying the equipment addressed in this manual must satisfy themselves that
each intended application is suitable and acceptable, including that any applicable safety or
other operational requirements are complied with. In particular, any risks in applications where
a system failure and /or product failure would create a risk for harm to property or persons
(including but not limited to personal injuries or death) shall be the sole responsibility of the
person or entity applying the equipment, and those so responsible are hereby requested to
ensure that all measures are taken to exclude or mitigate such risks.
This document has been carefully checked by Hitachi Power Grids but deviations cannot be
completely ruled out. In case any errors are detected, the reader is kindly requested to notify
the manufacturer. Other than under explicit contractual commitments, in no event shall
Hitachi Power Grids be responsible or liable for any loss or damage resulting from the use of
this manual or the application of the equipment.
ABB is a registered trademark of ABB Asea Brown Boveri Ltd. Manufactured by/for a Hitachi
Power Grids company.
Conformity
This product complies with the directive of the Council of the European Communities on the
approximation of the laws of the Member States relating to electromagnetic compatibility
(EMC Directive 2004/108/EC) and concerning electrical equipment for use within specified
voltage limits (Low-voltage directive 2006/95/EC). This conformity is the result of tests
conducted by ABB Power Grids in accordance with the product standard EN 60255-26 for the
EMC directive, and with the product standards EN 60255-1 and EN 60255-27 for the low voltage
directive. The product is designed in accordance with the international standards of the IEC
60255 series.
Table of contents
Section 1 Introduction.................................................................................................... 3
1.1 This manual....................................................................................................................................3
1.2 Intended audience........................................................................................................................3
1.3 Product documentation.............................................................................................................. 3
1.4 Revision history.............................................................................................................................3
1.5 Symbols and conventions...........................................................................................................4
1.5.1 Symbols........................................................................................................................................4
1.5.2 Document conventions............................................................................................................. 4
Section 2 Safety information.........................................................................................5
Section 3 Overview.......................................................................................................... 7
3.1 Functionalities...............................................................................................................................7
3.2 Structure of protection function software..............................................................................7
3.2.1 Functional diagram of bay protection REB500....................................................................8
3.2.2 Label number guide for Figure 1............................................................................................. 9
Section 4 Configuring bay protection using HMI500................................................11
4.1 Integration of bay protection................................................................................................... 11
4.2 Configuring the bay protection using HMI500..................................................................... 11
4.3 Select Protection Function .......................................................................................................12
4.4 Binary signal configuration.......................................................................................................17
4.4.1 Configuring binary input signals........................................................................................... 17
4.4.2 Assignment of BP internal input signals..............................................................................17
4.4.3 Assignment BP external input signals..................................................................................19
4.4.4 Configuring binary output signals........................................................................................ 21
4.4.4.1 Exception: Binary output function.................................................................................. 22
4.4.5 Recording a binary signal as an event..................................................................................24
4.4.6 Disturbance recording of a binary signal............................................................................ 25
4.5 Protection function settings....................................................................................................25
Section 5 System functions..........................................................................................27
5.1 BP Function Monitoring.............................................................................................................27
5.2 BP Licenses.................................................................................................................................. 27
5.3 CT grounding...............................................................................................................................28
Section 6 BP-Additions to base documentation....................................................... 29
6.1 Technical data............................................................................................................................. 29
6.2 Operation and maintenance.................................................................................................... 35
6.2.1 Maintenance of bay protection functions...........................................................................35
6.2.2 Protection blocking................................................................................................................. 35
6.2.3 Protection tripping.................................................................................................................. 35
6.3 Commissioning........................................................................................................................... 37
1MRK 505 403-UEN Rev. C Table of contents
Bay protection functions REB500 1
Application manual
© 2019 - 2020 Hitachi Power Grids. All rights reserved
6.3.1 Regulations................................................................................................................................37
6.3.2 Additional checks for bay protection REB500....................................................................37
6.3.2.1 Commissioning a new station without any HV.............................................................37
6.3.2.2 Additions to an existing station...................................................................................... 37
6.4 Communication.......................................................................................................................... 39
Table of contents 1MRK 505 403-UEN Rev. C
2Bay protection functions REB500
Application manual
© 2019 - 2020 Hitachi Power Grids. All rights reserved
Section 1 Introduction
1.1 This manual
GUID-B0C4F5E7-74A5-419E-ABF6-A61C4C2A8840 v1
The manual contains application descriptions, setting guidelines and technical data for the
bay protection functions. It is complementary to the basic
Application manual
of REB500.
The manual can be used to find out when and for what purpose a typical protection function
can be used. The manual can also be used when calculating settings.
1.2 Intended audience
GUID-17236C1D-57DE-480C-9684-E36D8886ED5F v1
This manual addresses the protection and control engineer responsible for planning, pre-
engineering and engineering.
The protection and control engineer must be experienced in electrical power engineering and
have knowledge of related technology, such as protection schemes and communication
principles.
1.3 Product documentation
GUID-91F0A03F-D1AF-4695-A239-1FC87E7459EE v3
REB500 manuals Document numbers
Product guide 1MRK 505 402-BEN
Application manual 1MRK 505 399-UEN
Technical manual 1MRK 505 400-UEN
Operation manual 1MRK 500 132-UEN
Engineering manual 1MRK 511 452-UEN
Commissioning manual 1MRK 505 401-UEN
Application manual for bay protection functions 1MRK 505 403-UEN
Technical manual for bay protection functions 1MRK 505 406-UEN
Cyber security deployment guideline 1MRK 511 453-UEN
Communication protocol manual IEC 61850 1MRK 511 450-UEN
Communication protocol manual IEC 60870-5-103 1MRK 511 451-UEN
Getting started guide 1MRK 505 404-UEN
1.4 Revision history
GUID-C876BDE2-918C-4B31-BA00-4D4A4190BFDC v1
1MRK 505 403-UEN Rev. C Section 1
Introduction
Bay protection functions REB500 3
Application manual
© 2019 - 2020 Hitachi Power Grids. All rights reserved
Document
revision
Date Product revision History
B 2019-07 8.3.0 First release
C 2020-10 8.3.1 Updates and extensions
1.5 Symbols and conventions
1.5.1 Symbols GUID-4F7DD10A-DEE5-4297-8697-B8AAB5E3262F v2
The electrical warning icon indicates the presence of a hazard which could
result in electrical shock.
The warning icon indicates the presence of a hazard which could result in
personal injury.
The caution icon indicates important information or warning related to the
concept discussed in the text. It might indicate the presence of a hazard which
could result in corruption of software or damage to equipment or property.
The information icon alerts the reader of important facts and conditions.
The tip icon indicates advice on, for example, how to design your project or
how to use a certain function.
Although warning hazards are related to personal injury, it is necessary to understand that
under certain operational conditions, operation of damaged equipment may result in
degraded process performance leading to personal injury or death. Therefore, comply fully
with all warning and caution notices.
1.5.2 Document conventions GUID-37C3ACF4-BD79-43C6-B37E-24B38EE69301 v3
A particular convention may not be used in this manual.
• Abbreviations and acronyms in this manual are spelled out in the glossary. The glossary
also contains definitions of important terms.
• Push button navigation in the LHMI menu structure is presented by using the push button
icons.
For example, to navigate the options, use and .
•HMI menu paths are presented in bold.
For example, select Main menu/Settings .
• Signal names are presented in bold.
The signal 21120_EXT_TEST_TRIP can be set and reset via the LHMI Test Trip menu.
• Parameter names and parameter values are presented in italics.
For example, the default value of the
Operation
setting is
Not inverted
.
• Section references are presented with the respective section numbers.
For example, see Section 1.5.2 for more details about document conventions.
Section 1 1MRK 505 403-UEN Rev. C
Introduction
4Bay protection functions REB500
Application manual
© 2019 - 2020 Hitachi Power Grids. All rights reserved
Other manuals for Relion REB500
17
Table of contents
Other ABB Protection Device manuals
ABB
ABB RET630 User manual
ABB
ABB REB670 Series Instructions for use
ABB
ABB Relion REB500 User manual
ABB
ABB RED650 User manual
ABB
ABB RET615 User manual
ABB
ABB REA 105 User manual
ABB
ABB RELION REB670 Quick start guide
ABB
ABB RELION REL670 User manual
ABB
ABB REM630 User manual
ABB
ABB Relion 670 series User manual
ABB
ABB RELION RET670 User manual
ABB
ABB Relion 670 Series REL670 Quick start guide
ABB
ABB RED615 ANSI User manual
ABB
ABB Relion 670 series User manual
ABB
ABB Relion 615 series User manual
ABB
ABB REL 551 2.3 Series Operating instructions
ABB
ABB RED615 ANSI User manual
ABB
ABB REL650 series User manual
ABB
ABB OVRHT3 Series User manual
ABB
ABB RARIC User manual
