ABB PrimEvo TW220E Manual

INSTRUCTION LEAFLET

—

PrimEvo

TW220E

PLEASE NOTE!

This product must not be modified in any

way. Only original parts should be used

for maintenance.

RPM 311 REV D 8.11.2017

Technical specifications

Power Supply 

Power Consumption 

LED 

Operation Maintained or Non-maintained

Function Manual test

Discharge Duration 

Charge Time 

Battery 

Protection Grade 

Protection Class II

Emergency lumens output 

NI-Mh,3.6V 1.8Ah 2pcs

Only narrow lens has adjustable function.

Adjust the lamp heads and lens direction according corridor pathway as per needs

Open fixture Ceiling Adjust lamp and

head lens

PRECAUTION

Carefully read this instruction leafet before installing

or using the luminaire. This leafet provides important

information about the correct installation, use,

maintenance and disposal of this product. Please

observe the following guidelines:

1. Installation must be in accordance with European



additional local regulations.

2. This product may not be modifed in any way what

so ever or used for a purpose or in an environment

other than for which it is designed. Failling to

observe these guidelines will invalidate the

warranty and the CE-compliance of this product.

3. The luminaire is suitable for indoor use only

4. Before installing the luminaire, the supply must be

isolated.

5. The luminaire must be replaced when it will not

achieve their rated duration.

MOUNTING INSTRUCTIONS

1. Use flat blade screwdriver insert the two slots and

pry off front cover from back plate.

2. Disconnect AC male and female connector.

3. Knock out center and appropriate mounting screw

holes on the back plate.

4. Route AC supply wire through center hole of back

plate.

5. Fix back plate on the mount surface with screw

and anchor nuts.

6. Connect the AC supply wire to terminal block,

reference wiring instruction showed next page.

7. Connect battery connector.

8. Connect AC male and female connector.

9. Snap front cover onto back plate.

10.Restore power and press test button, LED heads

will turn on.

11. Adjust the lamp head and lens direction as

perneeds.

MOUNTING

WALL MOUNTING

Back plate

Front cover

Battery connector

Terminal block

AC male and female connector

Standard EN1838 requirement:

1. Escape route up to 2m wide, 1 lux on the central

axis and 0.5lux at 50% of the width.

2. The ratio of the highest to the lowest illuminance

along the cental axis of the escape route may not

exceed 40:1

Luminaire mounting schematic

EXPLANATIONS

MAINTAINED & NON MAINTAINED FUNCTION

Maintained Operational:

Connect L,N and leave Jump cable connected.

For switchable Maintained Operational:

Connect L,N and remove Jump cable,

Connect switch live to terminal indicated.

Non maintained Operational:

Connect L,N and remove Jump cable

NEUTRAL

SWITCH LIVE

PERMANENT LIVE

JUMP

CABLE

PHOTOMETRIC

SPACING INFORMATION

Beam angle -C 22° -C90 120°

Lighting distribution

-90°

0°

-60°

-30°

90°

60°

30°

Spacing distance

Central Axis

Spacing Table

Mounting Height (m)

2.5

3.0

7.0 m

14.0 m

TW220E

Distance from wall to first LED luminaire

Distance from one luminaire to another

-0

° +40°

We reserve the right to make technical

changes or modify the contents of this

document without prior notice. With

regard to purchase orders, the agreed

particulars shall prevail. ABB AG does

not accept any responsibility whatsoever

for potential errors or possible lack of

information in this document.

We reserve all rights in this document

and in the subject matter and illustrations

contained therein. Any reproduction,

disclosure to third parties or utilisation of its

contents – in whole or in parts – is forbidden

without prior written consent of ABB AG.

RPM 311 REV E8.11.2017

—

Contact

ABB B.V.

Bruntcliffe Lane

Morley, Leeds

W.Yorkshire LS27 9LL,

United Kingdom

Tel: +44 (0) 113 281 0600

E-Mail: L[email protected]

new.abb.com

Other ABB Lighting Equipment manuals

ABB

ABB Stanilite Economy e-Luna circular LED User manual

ABB

ABB Stanilite Spitfire Standard User manual

ABB

ABB Thomas & Betts Standard User manual

ABB

ABB Thomas & Betts Standard User manual

ABB

ABB Stanilite Spitfire Standard User manual

ABB

ABB EMERGI-LITE Guideway Manual

ABB

ABB Stanilite User manual

ABB

ABB GE ReliaGear Lighting Panelboard User manual

ABB

ABB Stanilite Spitfire Standard User manual

ABB

ABB EGNL Series User manual

ABB

ABB PrimEvo SM100E Manual

ABB

ABB EMERGI-LITE Guideway Manual

ABB

ABB Stanilite Quickfit Nexus LX User manual

ABB

ABB Stanilite Emergency User manual

ABB

ABB EMERGI-LITE Serenga Manual

ABB

ABB Stanilite Quickfit Standard User manual

ABB

ABB Stanilite Nexus RF User manual

ABB

ABB KAUFEL Lutia Manual

ABB

ABB Stanilite Standard User manual

ABB

ABB Thomas&Betts Standard User manual

ABB

ABB Emergi-Lite Serenga Sun-Lite Manual

ABB

ABB Stanilite Standard User manual

Popular Lighting Equipment manuals by other brands

Brizo

Brizo 8SP-MU-4 manual

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 installation instructions

IKEA

IKEA BJÖRKSPIREA manual

Laserworld

Laserworld Evolution Series ES-400RGB manual

Alien

Alien RG STAR user manual

EuroLite

EuroLite LED B-40 user manual

Qazqa

Qazqa Suplux SL 3 Black 103062 instruction manual

Commercial Electric

Commercial Electric 54568141 Use and care guide

CREE LIGHTING

CREE LIGHTING 304 Series installation instructions

Goobay

Goobay 49867 user manual

ECOMAN ITALIA

ECOMAN ITALIA LED T8 instruction manual

Alkalite

Alkalite Krypton KT-81 user manual

Clas Ohlson

Clas Ohlson GU10 manual

DTS

DTS DELTA 10 F user manual

ring

ring Solar Steplight manual

One Stop Gardens

One Stop Gardens 57696 Owner's manual & safety instructions

Chauvet DJ

Chauvet DJ COREpar UV120 ILS user manual

SIREM

SIREM Swimeo A2 instructions