ABB RIO600 Instruction sheet
Remote I/O
RIO600
Configuration Manual
Document ID: 1MRS757489
Issued: 2011-12-23
Revision: A
Product version: 1.0
© Copyright 2011 ABB. All rights reserved
Copyright
This document and parts thereof must not be reproduced or copied without written
permission from ABB, and the contents thereof must not be imparted to a third
party, nor used for any unauthorized purpose.
The software or hardware described in this document is furnished under a license
and may be used, copied, or disclosed only in accordance with the terms of such
license.
Trademarks
ABB and Relion are registered trademarks of the ABB Group. All other brand or
product names mentioned in this document may be trademarks or registered
trademarks of their respective holders.
Warranty
Please inquire about the terms of warranty from your nearest ABB representative.
http://www.abb.com/substationautomation
Disclaimer
The data, examples and diagrams in this manual are included solely for the concept
or product description and are not to be deemed as a statement of guaranteed
properties. All persons responsible for applying the equipment addressed in this
manual must satisfy themselves that each intended application is suitable and
acceptable, including that any applicable safety or other operational requirements
are complied with. In particular, any risks in applications where a system failure and/
or product failure would create a risk for harm to property or persons (including but
not limited to personal injuries or death) shall be the sole responsibility of the
person or entity applying the equipment, and those so responsible are hereby
requested to ensure that all measures are taken to exclude or mitigate such risks.
This document has been carefully checked by ABB but deviations cannot be
completely ruled out. In case any errors are detected, the reader is kindly requested
to notify the manufacturer. Other than under explicit contractual commitments, in
no event shall ABB be responsible or liable for any loss or damage resulting from
the use of this manual or the application of the equipment.
Conformity
This product complies with the directive of the Council of the European
Communities on the approximation of the laws of the Member States relating to
electromagnetic compatibility (EMC Directive 2004/108/EC) and concerning
electrical equipment for use within specified voltage limits (Low-voltage directive
2006/95/EC). This conformity is the result of tests conducted by ABB in
accordance with the product standards EN 50263 and EN 60255-26 for the EMC
directive, and with the product standards EN 60255-1 and EN 60255-27 for the low
voltage directive. The product is designed in accordance with the international
standards of the IEC 60255 series.
Table of contents
Section 1 Introduction.......................................................................3
This manual........................................................................................3
Intended audience..............................................................................3
Product documentation.......................................................................3
Product documentation set............................................................3
Document revision history.............................................................3
Related documentation..................................................................4
Symbols and conventions...................................................................4
Symbols.........................................................................................4
Document conventions..................................................................4
Section 2 RIO600 overview..............................................................7
Overview.............................................................................................7
Module configuration.....................................................................8
Configuration and engineering tool for RIO600..................................9
PCM600 and RIO600 connectivity package version.....................9
Hardware and software requirements................................................9
RIO600 engineering flow..................................................................10
Section 3 Setting up a project........................................................11
Handling connectivity packages.......................................................11
Uninstalling connectivity packages .............................................11
Installing connectivity packages..................................................11
Activating connectivity packages ................................................14
Creating a new project......................................................................15
Building the plant structure...............................................................16
Inserting IEDs...................................................................................17
Inserting an IED in offline mode..................................................18
Inserting an IED in online mode..................................................24
Setting the technical key...................................................................32
Editing object properties...................................................................35
Section 4 Using the Parameter Setting tool...................................37
Viewing parameters..........................................................................37
Reading parameters from the device...............................................38
Setting communication and synchronization parameters ................39
Writing parameters to the device .....................................................40
Section 5 Using the Signal Matrix tool............................................43
Starting the Signal Matrix tool...........................................................43
Table of contents
RIO600 1
Configuration Manual
Exporting SCD files..........................................................................44
Importing SCD files...........................................................................46
Section 6 Common Read/Write (CRW)..........................................51
Starting Read/Write .........................................................................51
Section 7 Using the Composition Update tool................................55
Configuring the device offline...........................................................55
Configuring the device online...........................................................59
Section 8 GOOSE engineering......................................................65
Creating a project.............................................................................65
Importing an SCL file in IET600........................................................66
Creating GOOSE datasets ..............................................................68
Defining data attributes................................................................70
Configuring GOOSE control blocks..................................................70
Configuring a GOOSE Subscriber ...................................................72
Exporting SCD files in IET600..........................................................72
Section 9 Troubleshooting..............................................................75
Troubleshooting the technical key in online mode............................75
Troubleshooting the reading and writing of parameters...................76
Section 10 Glossary.........................................................................79
Table of contents
2RIO600
Configuration Manual
Section 1 Introduction
1.1 This manual
The configuration manual contains information on how to engineer the device
using the different tools in PCM600. The manual provides information for IEC
61850 engineering with PCM600 and IET600. For more details on tool usage, see
the PCM600 documentation.
1.2 Intended audience
This manual addresses system and project engineers involved in the engineering
process of a project.
1.3 Product documentation
1.3.1 Product documentation set
The installation and commissioning manual contains information on how to install
and commission the device. The manual provides an introduction to engineering
tasks and a description of the basic operations.
The configuration manual contains information on how to engineer the device
using the different tools in PCM600. The manual provides information for IEC
61850 engineering with PCM600 and IET600. For more details on tool usage, see
the PCM600 documentation.
The user manual (online help) contains instructions on how to use the RIO600
Configuration Wizard. The Configuration Wizard helps configure RIO600 for
different system products and tools with the help of the connectivity package. See
the product documentation for more information on handling the connectivity
packages in different system products and tools.
1.3.2 Document revision history
Document revision/date Product version History
A/2011-12-23 1.0 First release
1MRS757489 A Section 1
Introduction
RIO600 3
Configuration Manual
1.3.3 Related documentation
Name of the document Document ID
RIO600 Installation and Commissioning Manual 1MRS757488
Specific Communication Service Mapping (SCSM) – Mappings to
MMS (ISO 9506-1 and ISO 9506-2) and to ISO/IEC 8802-3
IEC 61850-8-1
Download the latest documents from the ABB Web site
http://www.abb.com/substationautomation.
1.4 Symbols and conventions
1.4.1 Symbols
The caution icon indicates important information or warning related
to the concept discussed in the text. It might indicate the presence
of a hazard which could result in corruption of software or damage
to equipment or property.
The information icon alerts the reader of important facts and
conditions.
The tip icon indicates advice on, for example, how to design your
project or how to use a certain function.
Although warning hazards are related to personal injury, it is necessary to
understand that under certain operational conditions, operation of damaged
equipment may result in degraded process performance leading to personal injury
or death. Therefore, comply fully with all warning and caution notices.
1.4.2 Document conventions
A particular convention may not be used in this manual.
• Abbreviations and acronyms in this manual are spelled out in the glossary. The
glossary also contains definitions of important terms.
• HMI menu paths are presented in bold.
Select Main menu/Settings.
• WHMI menu names are presented in bold.
Section 1 1MRS757489 A
Introduction
4RIO600
Configuration Manual
Other manuals for RIO600
1
Table of contents
Other ABB I/O System manuals
ABB
ABB S500 User guide
ABB
ABB VSN300s User manual
ABB
ABB CL-LSR Series User manual
ABB
ABB S900 User manual
ABB
ABB SAM600 Series Installation and operation manual
ABB
ABB Symphony Harmony Series User manual
ABB
ABB SAM600 Series Installation and operation manual
ABB
ABB Symphony Harmony Series User manual
ABB
ABB S800 I/O User manual
ABB
ABB OPT-MF-001 User manual
