Aaeon PFM-336I User manual

PC/104 Module PFM-336I

PFM-336I

386SX-40

PC/104 CPU Card

With LCD & DiskOnChip®

PFM-336I Manual 1st Ed.

April. 2005

PC/104 CPU Card PFM-336I

This document is copyrighted, 2005. All rights are reserved.

The original manufacturer reserves the right to make

improvements to the products described in this manual at

any time without notice.

No part of this manual may be reproduced, copied,

translated, or transmitted in any form or by any means

without the prior written permission of the original

manufacturer. Information provided in this manual is

intended to be accurate and reliable. However, the original

manufacturer assumes no responsibility for its use, or for

any infringements upon the rights of third parties that may

result from its use.

The material in this document is for product information

only and is subject to change without notice. While

reasonable efforts have been made in the preparation of

this document to assure its accuracy, AAEON assumes no

liabilities resulting from errors or omissions in this document,

or from the use of the information contained herein.

AAEON reserves the right to make changes in the product

design without notice to its users.

PC/104 CPU Card PFM-336I

Acknowledgments

All other products’ name or trademarks are properties of their

respective owners.

 ITE is a trademark of Integrated Technology Express, Inc.

 IBM, PC/AT, PS/2, and VGA are trademarks of International

Business Machines Corporation.

Packing List

Before you begin installing your card, please make sure that the

following materials have been shipped:

• 1 PFM-336I PC/104 CPU Card

• 1 Manual

• 1 Jumper Cap

• 1 8-pin (4 x 2 pin header) for Keyboard & PS/2 mouse

• 1 FDD Cable

• 1 IDE Cable

• 1 SVGA Adapter

• 1 Parallel Port Adapter

• 2 Serial Ports Adapter

If any of these items should be missing or damaged, please

contact your distributor or sales representative immediately.

PC/104 CPU Card PFM-336I

iii

Contents

Chapter 1 General Information

1.1 Introduction................................................................1-2

1.2 Features....................................................................1-3

1.3 Specifications............................................................1-4

Chapter 2 Quick Installation Guide

2.1 Safety Precautions....................................................2-2

2.2 Board Layout.............................................................2-3

2.3 Board Dimension.......................................................2-4

2.4 List of Jumpers..........................................................2-5

2.5 List of Connectors .....................................................2-6

2.6 Setting Jumpers ........................................................2-7

2.7 HDD LED (J1) ...........................................................2-8

2.8 Reset Switch (J2)......................................................2-8

2.9 DiskOnChip (DOC) 2000 Installation (J3).................2-8

2.10 LCD Power Select (J4)............................................2-9

2.11 Clear CMOS (J7).....................................................2-9

2.12 Shift Clock Select (J8).............................................2-9

2.13 RS-232/422/485 COM2 Setting (J5 & J6)...............2-10

2.14 IDE Hard Drive Connector (CN1)............................2-10

2.15 Keyboard Connector (CN2)..................................... 2-11

2.16 Display Connector (CN4 & CN6).............................2-11

2.17 Power Supply Connector (CN5)..............................2-12

PC/104 CPU Card PFM-336I

2.18 Parallel Port (CN8)..................................................2-13

2.19 Serial Port (CN9 & CN11).......................................2-13

2.20 Floppy Drive Connector (CN10)..............................2-14

Chapter 3 AMI BIOS Setup

3.1 System Test and Initialization. ..................................3-2

3.2 AMI BIOS Setup........................................................3-3

3.3 Standard CMOS Setup .............................................3-5

3.4 Advanced CMOS Setup............................................3-6

3.5 Advanced Chipset Setup...........................................3-7

3.6 PCI/Plug and Play Setup...........................................3-8

3.7 Peripheral Setup........................................................3-9

PC/104 CPU Card PFM-336I

Chapter 1 General Information

1-1

General

Information

Chapter

PC/104 CPU Card PFM-336I

Chapter 1 General Information

1.1 Introduction

The PFM-336I comes equipped with an embedded

microcontroller ALi M6117C which is Intel386SX-40

compatible. In addition, it comes with two serial ports

(RS-232), one bi-directional printer port supporting

SPP, ECP and EPP modes, and IDE HDD interface

and a floppy disk controller. With its industrial grade

reliability, the PFM-336I can operate continuously at

temperature up to 140°F (60°C).

The PFM-336I is specially designed as a compact

all-in-one CPU card which incorporates a PC/104

connector into its design, making non-passive

backplane SBC applications possible. The numerous

features provide an ideal price/performance solution

for high-end commercial and industrial applications

where stability and reliability are essential.

The PFM-336I features an SVGA interface which

supports CRT and Flat Panel (TFT, STN and Mono

displays), with 512KB onboard display memory.

PC/104 CPU Card PFM-336I

Chapter 1 General Information

1.2Features

nOnboard ALi M6117C, Intel386SX-40 compatible CPU

nOnboard 8Mbytes EDO DRAM

nC&T 65545 LCD controller with 512KB display memory

PC/104 CPU Card PFM-336I

Chapter 1 General Information

1.3Specifications

System

lCPU ALi M6117C, Intel80386SX-40 compatible

lChipset ALi M6117C

lIO Chipset ITE-8661

lBIOS AMI 128KB Flash BIOS.

lSystem Memory

Onboard 8MB EDO DRAM

lEnhanced IDE

Interface Supports up to two IDE devices.

lFDD Interface Supports up to two floppy disk drives, 5.25"

(360KB and 1.2MB) and /or 3.5" (720KB,

1.44MB and 2.88MB)

lSerial Ports One RS-232 and one RS-

232.422/485 serial

port. Ports can be configured as COM1,

COM2, COM3, COM4, or disabled

individually (16C550 equivalent)

lParallel port One bi-directional parallel port. Supports

SPP, ECP, and EPP modes.

lKeyboard/ PS2

Mouse

connector

8-pin (4x2, pin header) connector supports

PC/AT keyboard and PS/2 mouse

lWatchdog

Timer Ca

n generate a system reset, IRQ15 or NMI.

Software selectable time-out interval

(30.5us~512sec, 30.5us/step)

PC/104 CPU Card PFM-336I

Chapter 1 General Information

lSSD Support DiskOnChipup to 1GB

lDMA 7 DMA channels (8237 equivalent)

lInterrupt 15 interrupt levels (8259 equivalent)

Display

lChipset C&T 65545

lDisplay Memory

512KB

lDisplay Type Supports non-interlaced CRTand LCD

(TFT, DSTN and Mono).

lResolution Up to 800 x 600 @ 256 colors

Expansion Interface

lPC/104 One 16-bit 104-pin connector onboard

for PC/104 module expansion

Mechanical and Environment

lDimension 3.77”(L) x 3.54”(W)

lWeight 0.61b (0.25kg)

lOperating

Temperature 0~60°C (32~140°F)

lPower Supply

Voltage +5V(4.75V to 5.25V)

Table of contents

Popular Computer Hardware manuals by other brands

EMC2

EMC2 VNX Series Hardware Information Guide

Panasonic

Panasonic DV0PM20105 Operation manual

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 user manual

Gigabyte

Gigabyte B660M DS3H AX DDR4 user manual

Raidon

Raidon iT2300 Quick installation guide

National Instruments

National Instruments PXI-8186 user manual

Hauppauge

Hauppauge WinTV-HVR-2250 Quick installation guide

Kontron

Kontron CP6002 user guide

Manhattan

Manhattan 702843 user manual

Aphex

Aphex 230 instruction manual

AMD

AMD Phenom II Product data sheet

Intel

Intel NUC 12 Pro user guide

dbx

dbx Zone Pro 1260 user manual

Galaxy

Galaxy GHDX2-2430S-24F4D Installation and hardware reference manual

Intel

Intel AXXRMFBU4 Quick installation user's guide

Kontron

Kontron DIMM-PC/MD product manual

ST X-NUCLEO-SAFEA1B How to use

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 installation manual