3One data IES605-2D series User manual
IES605-2D series
Industrial Ethernet switch
User manual
Shenzhen 3onedata Technology Co.,Ltd
Tel: +86-755-26702668 Fax: +86-755-26703485
www.3onedata.com
【Summarize】
IIES605-2D series is an industrial, management, redundant
industrial Ethernet switch and integrate 2 port serial device servers.
It included
1. IES605-2D (RS-232)-P (12/48VDC),
Support 5 port 10/100Base T(X) and 2 port RS-232,
2. IES605-2DI (RS-485)-P (12/48VDC),
Support 5 port 10/100BaseT(X) and 2 port RS-485/422,
3. IES605-1F-2D (RS-232)-P (12/48VDC),
Support 4 port is 10/100BaseT(X) Ethernet, 1 port is 100BaseFX
fiber port and 2 port RS-232,
4. IES605-1F-2DI (RS-485)-P(12/48VDC),
Support 4 port is 10/100BaseT(X) Ethernet, 1 port is 100BaseFX
fiber port and 2 port RS-485/422,
5. IES605-2F-2D (RS-232)-P (12/48VDC),
Support 3 port is 10/100BaseT(X) Ethernet, 2 port is 100BaseFX
fiber port and 2 port RS-232,
6. IES605-2F-2DI (RS-485)-P (12/48VDC).
Support 3 port is 10/100BaseT(X) Ethernet, 2 port is 100BaseFX
fiber port and 2 port RS-485/422,
it adopted SW-Ring redundant technology (Recovery time<20ms),
users can set the redundant easily to increase network reliability,
furthermore. It adopted no fan, low power consumption design,
IP30, corrugate high strength iron shell, the performance is more
steadily. It accorded with CE, FCC standard and Industrial 4 class,
DIN rail installation and wide operating temperature (-40~75C), it
can satisfied some kinds of industrial environment, it can provide
reliable and quickly solution for your Ethernet device
【Packing list】
Please check the packaging and accessories by your first
using.
Industrial Ethernet switch(IES605-2D series)ⅹ 1
User manual ⅹ 1
CD ⅹ 1
Certificate of quality ⅹ 1
Warranty card ⅹ 1
Please inform us or our distributor if your equipments have
been damaged or lost any accessories, we will try our best to
satisfy you.
【Features】
IEEE802.3, IEEE802.3u, IEEE 802.3x
Support SW-RingTM redundant network patent technology
(Faulty recovery time<20ms)
Support 2 port RS-232/ RS-485/ RS-422 serial device server
Support based on socket application access
Support Sever, Client, UDP based mode and Sever, UDP
advanced mode
Support TCP, UDP, ARP, and DHCP protocol
Support Web management
Support 2K MAC address table
Support 2 power supply input and 1 relay alarm output
Support port line and redundant network faulty/unusual,
local and remote alarm
High strength iron shell, IP30 protection
Industrial 4 class design
Redundant 24VDC power supply input(12~48VDC)
-40~75℃working temperature
DIN-rail, wall mounting installation
【Panel Layout】
IES605-2D series
Back view Top and below view
IES605-2D（RS-232）-P(12/48VDC)
1. PWR1/PWR2 power supply
2. Ground screw
3. Relay output terminal block
4. DIP switch (4 bits)
5. DIN-Rail
6. LED indicator
7. 10/100Base-TX RJ45 port
8. RS-232 port
IES605-2DI（RS-485）-P(12/48VDC)
1. PWR1/PWR2 power supply
2. Ground screw
3. Relay output terminal block
4. DIP switch (4 bits)
5. DIN-Rail
6. LED indicator
7. 10/100Base-TX RJ45 port
8. RS-485/422 port
IES605-1F-2D（RS-232）-P(12/48VDC)
1. PWR1/PWR2 power supply
2. Ground screw
3. Relay output terminal block
4. DIP switch (4 bits)
5. DIN-Rail
6. LED indicator
7. 100Base-FX fiber port
8. RS-232 port
9. 10/100Base-TX RJ45 port
IES605-1F-2DI（RS-485）-P(12/48VDC)
1. PWR1/PWR2 power supply
2. Ground screw
3. Relay output terminal block
4. DIP switch (4 bits)
5. DIN-Rail
6. LED indicator
7. 100Base-FX fiber port
8. RS-485/422 port
9. 10/100Base-TX RJ45 port
IES605-2F-2D（RS-232）-P(12/48VDC)
1. PWR1/PWR2 power supply
2. Ground screw
3. Relay output terminal block
4. DIP switch (4 bits)
5. DIN-Rail
6. LED indicator
7. 100Base-FX fiber port
8. RS-232 port
9. 10/100Base-TX RJ45 port
IES605-2F-2DI（RS-485）-P(12/48VDC)
1. PWR1/PWR2 power supply
2. Ground screw
3. Relay output terminal block
4. DIP switch (4 bits)
5. DIN-Rail
6. LED indicator
7. 100Base-FX fiber port
8. RS-485/422 port
9. 10/100Base-TX RJ45 port
【Appearance and dimension】
Unit (mm)
Front view Back view
【Power supply input】
Vertical view Top view
IES605-2D series provide 4 bits industry terminal block (V1-,
V1+, V2-, V2+）), V-, V+ is 12～48VDC power supply input.
IES605-2D series DC power supply input supported
redundancy function, provided PWR1 and PWR2 power input,
can use for single, and can connect 2 separately power supply
system, use 1 pair terminal block connect the device at the same
time. If one of the power system broke, the device can work
un-interruptible. built-in over current protection, Reverse
connection protection
【Relay connection】
Vertical view Top view
The relay owns two contacts of the terminal block on the top
panel of IES605-2D series. It is used to detect both power failure
and port failure. The two wires attached to contacts form an open
circuit when:
(1) IES605-2D series has lost power supply from one of the
DC power inputs.
(2) One of the ports is failure.
【DIP switch】
Top panel provided 4 bits DIP switch to do function
configure（OFF is default factory）,1 and 2 keep for future function.
3 is for upgrade. 4 is recovery default factory. Please power off
and power on when you change the status of DIP switch.
【Communication connector】
10/100BaseT(X) Ethernet port
The pinout of RJ45 port display as below, connect by UTP or
STP. The connect distance is no more than 100m. 100Mbps is
used 120Ωof UTP 5 , 10Mbps is used 120Ωof UTP 3,4,5.
RJ 45 port support automatic MDI/MDI-X operation. can
connect the PC, Server, Converter and HUB .Pin 1,2,3,6
Corresponding connection in MDI. 1→3, 2→6, 3→1, 6→2 are
used as cross wiring in the MDI-X port of Converter and HUB.
10Base-T/100Base-TX are used in MDI/MDI-X, the define of Pin
in the table as below.
NO.
MDI signal
MDI-X signal
1
TX+
RX+
2
TX-
RX-
3
RX+
TX+
6
RX-
TX-
4, 5, 7, 8
—
—
Note：“TX±”Transmit Data±，“RX±”Receive Data±，“—”Not Use。
MDI (straight-through cable)
1 8
MDI-X (Cross over cable)
MDI/MDI-X auto connection makes IES605-2D easy to use
for customers without considering the type of network cable.
100Base-FX Fiber port
100Base-FX full-duplex SM or MM port, SC/ST/FC type .The
fiber port must be used in pair, TX (transmit) port connect remote
switch’s RX (receive) port; RX (receive) port connect remote
switch’s TX (transmit) port.
The optical fiber connection supports the line to instruct
enhance the reliability of network effectively.
Suppose: If you make your own cable, we suggest labeling the
two sides of the same line with the same letter (A-to-A and B-to-B,
shown as below, or A1-to-A2 and B1-to-B2).
RS-232 port：
PIN
RS-232
1
DCD
2
RxD
3
TxD
4
DTR
5
GND
6
DSR
7
RTS
8
CTS
9
—
DB9 male (RS-232)
RS-485/422 port:
PIN
RS-422
RS-485
1
T+
D+
2
T-
D-
3
GND
/
4
R+
/
5
R-
/
RS-485/422
【LED indicator】
IES605-2D series LED indicator light on the front panel .the
function of each LED is described in the table as below:
Table of contents
Other 3One data Network Router manuals
3One data
3One data IES2010-2GS-4F Manual
3One data
3One data IES6116 Series User manual
3One data
3One data IEM615 Series Instructions for use
3One data
3One data IES318 Series User manual
3One data
3One data IES6116 Series User manual
3One data
3One data ICPE2600 Series User manual
3One data
3One data IES205G User manual
3One data
3One data IES5024-2F Manual
3One data
3One data PS1005G-1GT-4PoE User manual
3One data
3One data IES3016G User manual
3One data
3One data IES206G-2GS User manual
3One data
3One data ICS5028G-4XGS-8GC User manual
3One data
3One data IES615-2D Series User manual
3One data
3One data IES2010-2GS Series User manual
3One data
3One data IES5028G-8GC-4GS User manual
3One data
3One data IRT5300-AW-5T2D User manual
3One data
3One data IES3020-4GS-4F-P User manual
3One data
3One data IES6312 Series User manual
3One data
3One data ICPE2300A-BW-8A25-1GC3GT-PD2P12 48 User manual
3One data
3One data IES215-1F-P User manual
